Date: Sun, 17 Sep 2006 17:44:46 GMT From: Artem <artemkm@yahoo.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/103332: Fxp driver does not work correctly on Intel 82550, if "link0" options will be turned on Message-ID: <200609171744.k8HHikCg010208@www.freebsd.org> Resent-Message-ID: <200609171750.k8HHoPrh044790@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 103332
>Category: kern
>Synopsis: Fxp driver does not work correctly on Intel 82550, if "link0" options will be turned on
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Sep 17 17:50:25 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Artem
>Release: 6.1 AMD64
>Organization:
>Environment:
FreeBSD test 6.1-RELEASE-p6 FreeBSD 6.1-RELEASE-p6 #0: Sat Sep 9 23:18:27 MSD 2006 root@test:/usr/obj/usr/src/sys/my amd64
>Description:
If "link0" option used for Intel 82550, network adapter will work only with ICMP. If link0 is off (ifconfig fxp1 -link0) card will work correctly. This behaviour is fair for both IA32 and AMD64 architecture.
In FreeBSD 4.11 (IA 32) option "link0" work correctly.
Hardware:
dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p6 #0: Sat Sep 9 23:18:27 MSD 2006
root@test:/usr/obj/usr/src/sys/my
ACPI APIC Table: <AMIINT VIA_K8 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2000.08-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf48 Stepping = 8
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1027653632 (980 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <AMIINT VIA_K8> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
device_attach: acpi_perf0 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon RV280 9200> port 0xa800-0xa8ff mem 0xc0000000-0xc7ffffff,0xcfaf0000-0xcfafffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 128MB
info: [drm] Initialized radeon 1.19.0 20050911
pci1: <display> at device 0.1 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xe400-0xe43f mem 0xcfffe000-0xcfffefff,0xcfe00000-0xcfefffff irq 17 at device 6.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:27:28:93:d1
pcm0: <Creative Audigy 2 (EMU10K2)> port 0xe000-0xe03f irq 18 at device 7.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
fwohci0: <1394 Open Host Controller Interface> mem 0xcfffd800-0xcfffdfff,0xcfff8000-0xcfffbfff irq 19 at device 7.2 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:51:07:d4:d2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:07:d4:d2
fwe0: Ethernet address: 02:02:3c:07:d4:d2
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp1: <Intel 82550 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xcfffc000-0xcfffcfff,0xcffa0000-0xcffbffff irq 19 at device 8.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:02:b3:4c:d8:4a
ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xcffff000-0xcfffffff irq 17 at device 10.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
atapci0: <VIA 6420 SATA150 controller> port 0xd800-0xd807,0xd400-0xd403,0xd000-0xd007,0xcc00-0xcc03,0xc800-0xc80f,0xc400-0xc4ff irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xcfffd600-0xcfffd6ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd2800-0xd37ff,0xd3800-0xd4fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2000082479 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
Waiting 5 seconds for SCSI devices to settle
ad0: 58643MB <IC35L060AVVA07 0 VA3OA50K> at ata0-master UDMA100
acd0: DVDR <TEAC DV-W58G-A/U4S2> at ata1-master UDMA33
acd1: CDRW <CR-48XATE/1.0E> at ata1-slave UDMA33
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST373307LW 0007> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST373207LW 0003> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
........
fxp1: Microcode loaded, int_delay: 1000 usec bundle_max: 6
pciconf -lv
agp0@pci0:0:0: class=0x060000 card=0x31881106 chip=0x31881106 rev=0x01 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'Apollo K8T800 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1881106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'Apollo K8HTB CPU to AGP 2.0/3.0 Bridge'
class = bridge
subclass = PCI-PCI
fxp0@pci0:6:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
pcm0@pci0:7:0: class=0x040100 card=0x20021102 chip=0x00041102 rev=0x04 hdr=0x00
vendor = 'Creative Labs'
device = 'SoundBlaster Audigy Audigy Audio Processor'
class = multimedia
subclass = audio
emujoy0@pci0:7:1: class=0x098000 card=0x00401102 chip=0x70031102 rev=0x04 hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10K2 Audigy Gameport'
class = input device
fwohci0@pci0:7:2: class=0x0c0010 card=0x00101102 chip=0x40011102 rev=0x04 hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10K2 Audigy IEEE1394 Firewire Controller'
class = serial bus
subclass = FireWire
fxp1@pci0:8:0: class=0x020000 card=0x00408086 chip=0x12298086 rev=0x0d hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
ahc0@pci0:10:0: class=0x010000 card=0x62a19005 chip=0x00819005 rev=0x02 hdr=0x00
vendor = 'Adaptec Inc'
device = '19160 AIC-7892B Ultra160 SCSI Adapter'
class = mass storage
subclass = SCSI
atapci0@pci0:15:0: class=0x010400 card=0x70201462 chip=0x31491106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 VT6410 SATA RAID Controller'
class = mass storage
subclass = RAID
atapci1@pci0:15:1: class=0x01018a card=0x70201462 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
uhci0@pci0:16:0: class=0x0c0300 card=0x70201462 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci1@pci0:16:1: class=0x0c0300 card=0x70201462 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci2@pci0:16:2: class=0x0c0300 card=0x70201462 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci3@pci0:16:3: class=0x0c0300 card=0x70201462 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
ehci0@pci0:16:4: class=0x0c0320 card=0x70201462 chip=0x31041106 rev=0x86 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
isab0@pci0:17:0: class=0x060100 card=0x32271106 chip=0x32271106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 PCI-to-ISA Bridge'
class = bridge
subclass = PCI-ISA
hostb0@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb1@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb2@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb3@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
drm0@pci1:0:0: class=0x030000 card=0x0130174b chip=0x59601002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV280 Radeon 9200 Pro'
class = display
subclass = VGA
none0@pci1:0:1: class=0x038000 card=0x0131174b chip=0x59401002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV280 Radeon 9200 Pro - Secondary'
class = display
fxp1@pci0:8:0: class=0x020000 card=0x00408086 chip=0x12298086 rev=0x0d hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
ifconfig fxp1
fxp1: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 192.168.11.43 netmask 0xffffff00 broadcast 192.168.11.255
ether 00:02:b3:4c:d8:4a
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
>How-To-Repeat:
Hardvare: intel 82550 card
ifconfig fxp_ link0
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200609171744.k8HHikCg010208>