Date: Fri, 21 Aug 1998 15:16:49 -0700 From: John Derk <johnderk@infoserve.net> To: freebsd-questions <freebsd-questions@FreeBSD.ORG> Subject: Installing Xwindows Message-ID: <35DDF1D0.30E93FD3@infoserve.net>
next in thread | raw e-mail | index | archive | help
Hi. Still working on getting Xwindows to work for me. Here is the latest output from 'startx': XFree86 Version 3.3.2 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: February 28 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.2.5-STABLE i386 Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge, s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200, ct64300, generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: MouseMan, device: dev/sysmouse, baudrate: 1200 (**) Mouse: buttons: 3, Chorded middle button (**) SVGA: Graphics device ID: "S3 86C375 (generic)" (**) SVGA: Monitor ID: "Crystal Ball" (--) SVGA: Mode "800x600" needs vert refresh rate of 56.25 Hz. Deleted. (--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted. (--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted. (--) SVGA: Mode "640x400" needs vert refresh rate of 85.01 Hz. Deleted. (--) SVGA: Mode "1152x864" needs vert refresh rate of 89.18 Hz. Deleted. (--) SVGA: Mode "640x480" needs vert refresh rate of 100.02 Hz. Deleted. (--) SVGA: Mode "800x600" needs vert refresh rate of 84.99 Hz. Deleted. (--) SVGA: Mode "1280x1024" needs vert refresh rate of 87.59 Hz. Deleted. (--) SVGA: Mode "800x600" needs vert refresh rate of 100.03 Hz. Deleted. (--) SVGA: Mode "1024x768" needs vert refresh rate of 75.94 Hz. Deleted. (--) SVGA: Mode "1024x768" needs vert refresh rate of 85.45 Hz. Deleted. (--) SVGA: Mode "1152x864" needs vert refresh rate of 78.06 Hz. Deleted. (--) SVGA: Mode "1152x864" needs vert refresh rate of 83.72 Hz. Deleted. (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted. (--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted. (--) SVGA: Mode "320x240" needs vert refresh rate of 75.14 Hz. Deleted. (--) SVGA: Mode "400x300" needs vert refresh rate of 56.34 Hz. Deleted. (--) SVGA: Mode "480x300" needs vert refresh rate of 56.34 Hz. Deleted. Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/"). Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Type1/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Type1/"). Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/"). Warning: 'fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/" (--) SVGA: PCI: S3 ViRGE/DX or /GX rev 1, Memory @ 0xe0000000 (--) SVGA: S3V: ViRGE/DXGX rev 1, Linear FB @ 0xe0000000 (--) SVGA: Detected S3 ViRGE/DXGX (--) SVGA: using driver for chipset "s3_virge" (--) SVGA: videoram: 4096k (--) SVGA: Ramdac speed: 170 MHz (--) SVGA: Detected current MCLK value of 54.886 MHz (--) SVGA: chipset: s3_virge (--) SVGA: videoram: 4096k (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 170.000 MHz (**) SVGA: Mode "1024x768": mode clock = 75.000 (**) SVGA: Mode "800x600": mode clock = 50.000 (**) SVGA: Mode "640x480": mode clock = 31.500 (--) SVGA: Virtual resolution set to 1024x768 (--) SVGA: Generic SpeedUps selected (Flags=0x30) (--) SVGA: s3_virge: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 pattern fill (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext, TE/NonTE polytext) (--) SVGA: XAA: Using 8 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and non-transparent stipples (--) SVGA: XAA: Horizontal and vertical lines and segments System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 compiled/xfree86.xkm' Fatal server error: Cannot open mouse (No such file or directory) When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). ########################## Looks like I've got the mouse configured incorrectly, but I'm not sure what I've done wrong. What's the best way to troubleshoot from this point? Can I just edit the XF86Config file? If so, how? Thanks, John Derk <johnderk@infoserve.net> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35DDF1D0.30E93FD3>