Date: Thu, 14 Dec 2000 11:07:21 -0800 From: "Chris Smith" <chrissmith@mgci.com> To: <freebsd-questions@FreeBSD.ORG> Subject: ncplib and netware 4.10 addition Message-ID: <018901c06601$16250820$0c00a8c0@amgroupadmin.com> References: <017401c06600$68dcae20$0c00a8c0@amgroupadmin.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Whoops, forgot to send dmesg:
FreeBSD 4.2-STABLE #0: Wed Dec 13 15:17:29 PST 2000
chris@amgroupadmin.com:/usr/obj/usr/src/sys/CJSKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 126291968 (123332K bytes)
Preloaded elf kernel "kernel" at 0xc043e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xe000-0xe00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xe800-0xe8ff mem
0xd5000000-0xd5000fff irq 10 at device 16.0 on pci0
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem
0xd5001000-0xd50010ff irq 5 at device 17.0 on pci0
rl0: Ethernet address: 00:00:21:f5:aa:47
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <TOSHIBA CD-ROM XM-6302B> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST39236LW 0010> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39236LW 0010> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
Chris Smith
----- Original Message -----
From: "Chris Smith" <chris@amgroupadmin.com>
To: <freebsd-questions@FreeBSD.ORG>
Sent: Thursday, December 14, 2000 11:02 AM
Subject: ncplib and netware 4.10
> Hi,
>
> I am trying to get ncplib working with a Netware 4.10 server and I cannot
> make it work no matter what I try. I have successfully gotten it to work
> on other configurations, one a 4.11 server and one a 5.0 server without a
> problem, but it will not login to my 4.10 server.
>
> When I do the following:
>
> /home/chris# ncplogin -S aga_41 -U chris
>
> it responds with:
>
> Netware password:
>
> I enter my password and then it responds with:
>
> ncplogin: Could not login to server AGA_41: nwerr = 89fc
>
> I try ipxping:
>
> /home/chris# ipxping aga_41
>
> reponse:
>
> Ping aga_41 (11110000H.1H.9086H): 8 data bytes
> ipxping: can't recv(): Operation timed out
> ipxping: can't recv(): Operation timed out
> ipxping: can't recv(): Operation timed out
> ipxping: can't recv(): Operation timed out
>
> I do an ncplist:
>
> /home/chris# ncplist s
>
> response:
>
> Visible servers (from AGA_41):
> Name Network Node Port
> ---------------------------- -------- ------------ ----
> AGA_41 11110000:000000000001:0451
>
> When I look at netstat:
>
> /home/chris# netstat -fipx -r
> Routing tables
>
> IPX:
> Destination Gateway Flags Netif Expire
> 101.* 101.21f5aa47 U rl0
> bebe.* bebe.* U lo0
> e100.* 101.a0c9f15e7b UG rl0
> e101.* 101.a0c9f15e7b UG rl0
> default 101.a0c9f15e7b UG rl0
>
> Everything looks ok there, it just refuses to talk!!
>
> My Netware Ethernet_II config (snipped from rconsole):
>
> E100B-2_EII [E100B port=DC00 mem=D5200000 int=B frame=ETHERNET_II]
> --------------------------------------------------------------------------
--
> Version 4.39
> Node address: 00A0C9F15E7B
> Protocols:
> IPX
> Network address: 00000101
>
> Generic statistics
> Total packets sent: 164,163,718
> Total packets received: 132,597,013
> ....
>
> Everything seems to be in order here.
>
> ----------
>
> Does ncplib work with Netware 4.10?? I haven't had a problem with any
other
> setups but this one.
> Maybe there's something I need to set on my 4.10 server to allow
> communication.
>
> Thank you in advance for your help.
> Chris Smith
> _________________
> IT Department
> American Group Administrators
> First National Administrators
>
>
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?018901c06601$16250820$0c00a8c0>