Date: Wed, 03 Jul 1996 09:55:32 +0900 From: Atsushi MURAI <amurai@spec.co.jp> To: gibbs@freefall.freebsd.org Cc: nao@sbl.cl.nec.co.jp, joerg_wunsch@uriah.heep.sax.de, j@uriah.heep.sax.de, freebsd-current@freebsd.org Subject: Re: Ethernet 3c579(EISA) is functional? Message-ID: <9607030055.AA00363@tama3.spec.co.jp.spec.co.jp> In-Reply-To: <199607021538.IAA16347@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi all, "Justin T. Gibbs" <gibbs@freefall.freebsd.org> wrote: :>My config file follows. :> :>I set up my 3C579 with AMI ecu. My motherboard is 486EI. I use only :>with a BT747 SCSI controller. :> :>-nao : :If you are running current or stable or 2.1.5Beta, you should have an :entry like this: : :controller eisa0 :device ep0 at isa? port 0x300 net irq 10 vector epintr : ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ : :The underlined portion of the line is not even needed if you are :going to attach an eisa device. It should properly retrieve all of :that information during the eisa probe. I thought ep dirver is a functional and accept same configuration syntax as same as bt driver on eisa bus subsystem working perfectly even just write "device bt0"..... By the way, how do I set/know a port value of isa instead of an eisa port number ? I can't find any isa port selection with 3c579 window on eisa configuration utiliy... :-- :Justin T. Gibbs :=========================================== : FreeBSD: Turning PCs into workstations :=========================================== Thanks a lot! Atsushi. -- Atsushi Murai E-Mail: amurai@spec.co.jp SPEC Voice : +81-3-3833-5341 System Planning and Engineering Corp.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9607030055.AA00363>