Date: Sun, 19 Dec 1999 20:51:16 -0500 From: Peter Radcliffe <pir@pir.net> To: PAO Report <pao-report@clave.gr.jp> Cc: freebsd-mobile@FreeBSD.ORG Subject: Xircom CreditCard Ethernet Adaptor IIps Message-ID: <19991219205116.A25977@pir.net>
next in thread | raw e-mail | index | archive | help
This card isn't in the PAO pccard.conf.sample but appears to work fine.
# Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10)
card "Xircom" "CreditCard 10Base-T"
config auto "xe0" any
insert logger -s Xircom CC IIps inserted
insert /etc/pccard_ether $device
remove logger -s Xircom CC IIps removed
remove /etc/pccard_ether_remove $device
FreeBSD 3.3-R+PAO.
PAO CVSuped today 1999-12-19.
"Xircom"("CreditCard 10Base-T") [PS-CE2-10] [2.02]
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 79
000: 04 01 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
010: 61 72 64 20 31 30 42 61 73 65 2d 54 00 50 53 2d
020: 43 45 32 2d 31 30 00 32 2e 30 32 00 00 00 00 00
030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
Version = 4.1, Manuf = [Xircom], card vers = [CreditCard 10Base-T]
Addit. info = [PS-CE2-10],[2.02]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: 08 ee 82 00 00 00 00 00
Tuple #5, code = 0x0 (Null tuple), length = 8
000: 04 06 00 80 c7 08 ee 82
Tuple #6, code = 0x20 (Manufacturer ID), length = 5
000: 05 01 0a 01 41
PCMCIA ID = 0x105, OEM ID = 0x10a
Tuple #7, code = 0x44 (Card init date), length = 4
000: 0b b5 b8 1e
Tuple #8, code = 0x1a (Configuration map), length = 5
000: 01 01 00 08 03
Reg len = 2, config register addr = 0x800, last config = 0x1
Registers: XX------
Tuple #9, code = 0x1b (Configuration entry), length = 24
000: c1 c1 bd 3f 55 4d 5d 2e 2e 2e e0 17 17 ea 60 00
010: 03 0f 70 fc ff 10 00 20
Config index = 0x1(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 2.5 x 100mA
Max current average over 1 second: 2.5 x 100mA
Max current average over 10 ms: 2.5 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 10 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length = 0x10
IRQ modes: Level, Pulse
IRQs: 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Memory space length = 0x10
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #10, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #11, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 80 c7 08 ee 82
Network node ID: 00 80 c7 08 ee 82
Tuple #12, code = 0x22 (Functional EXT), length = 2
000: 01 02
Network technology: Ethernet
Tuple #13, code = 0x22 (Functional EXT), length = 5
000: 02 80 96 98 00
Network speed: 10 Mb/sec
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 03 03
Network media: Thin coax
Tuple #15, code = 0x22 (Functional EXT), length = 2
000: 03 01
Network media: UTP
Tuple #16, code = 0x22 (Functional EXT), length = 2
000: 05 01
Network connector: closed connector standard
Tuple #17, code = 0xff (Terminator), length = 0
1 slots found
--
pir pir@pir.net pir@net.tufts.edu
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991219205116.A25977>