Date: Thu, 14 Dec 2000 16:28:30 -0500 From: "James F. Hranicky" <jfh@cise.ufl.edu> To: questions@freebsd.org Subject: Problems with second Adaptec (39160) card: System hangs during boot Message-ID: <20001214212831.EB65DDE81@mail.cise.ufl.edu>
next in thread | raw e-mail | index | archive | help
I've recently tried installing an Adaptec 39160 card into one of my
FreeBSD servers, however, about halfway through the boot process, the
system hangs. Here's (hopefully) the relevant parts of the boot
sequence:
----------------------------------
FreeBSD 4.2-STABLE #0: Thu Dec 14 12:08:38 EST 2000
root@palm.cise.ufl.edu:/private/freebsd-src/obj/private/freebsd-src/src/sys/CISEKERN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (646.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
[...]
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1
pci2: <PCI bus> on pcib3
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 5 at device 11.0 on pci0
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 11 at device 11.1 on pci0
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
ahc2: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2800-0x28ff mem 0xf4102000-0xf4102fff irq 11 at device 12.0 on pci0
aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc3: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2c00-0x2cff mem 0xf4103000-0xf4103fff irq 11 at device 12.1 on pci0
aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3000-0x303f mem 0xf4000000-0xf40fffff,0xf4104000-0xf4104fff irq 10 at device
[...]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
[HANG]
----------------------------
If I remove the card, the system continues on past this point:
----------------------------
[...]
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
ata0-slave: ata_command: timeout waiting for intr
ata0-slave: identify failed
acd0: CDROM <CD-540E> at ata0-master using PIO4
Waiting 5 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS 10K 9WLS UCP2> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C)
[...]
----------------------------
I have the following options set:
options DDB
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
however, the system doesn't respond to a break on the serial console at this
point. If the keyboard is plugged in, however, it will reboot after a <Ctrl>
<Alt><Del> .
It seems that both cards are using irq 11 for one or both channels. I don't
know if this is the problem, and if it is, if there's anything I can do
about it.
If anyone needs more info, I can supply it.
----------------------------------------------------------------------
| Jim Hranicky, Senior SysAdmin UF/CISE Department |
| E314D CSE Building Phone (352) 392-1499 |
| jfh@cise.ufl.edu http://www.cise.ufl.edu/~jfh |
----------------------------------------------------------------------
- Encryption: its use by criminals is far less -
- frightening than its banishment by governments -
- Vote for Privacy -
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001214212831.EB65DDE81>