Date: Thu, 15 Mar 2001 17:57:00 -0500 From: tcn <nospam@videotron.ca> To: Andrew Gallatin <gallatin@cs.duke.edu> Cc: freebsd-alpha@freebsd.org Subject: Re: Syslog reports weird things Message-ID: <3AB148BC.5020106@videotron.ca> References: <59063B5B4D98D311BC0D0001FA7E452205FD9A4F@l04.research.kpn.com> <15024.11923.918574.297867@grasshopper.cs.duke.edu> <3AB037F6.80405@videotron.ca> <15024.17137.342441.45530@grasshopper.cs.duke.edu> <3AB0E5E4.3951E240@ele.etsmtl.ca> <15025.5868.345485.300691@grasshopper.cs.duke.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------050107070900010304000502
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
> Are any of you who are seeing this customizing the console in any way?
> Colors, screensavers, fonts, etc? Or are you running a base 80x25
> white-on-black console like me? How about kernel config options
> to syscons?
I am not customizing anything but keyboard rate. It is plain VGA
80x25. Kernel options on console are the GENERIC's.
I just tried the serial console and I'm sorry, it is useless. I is
not working properly; I am loosing too many characters at speed of
9600. My screen gets messed up pretty good (I can't even see the login
prompt properly...) Tough, I was able to try lynx even if I wasn't
seeing anything good, then got a peek at the /var/log/messages using
ssh... Lynx output is still in syslog.
I am sending you my dmesg (I don't think it would help you tough) and
my config. After this bug, I'm gonna bug you guys for the serial
console bug... ;)
Maybe I can be of any help but I'd need guidance. I know my way
around code. (I even tought about joining developpement for the Alpha
platform but since my schedule is full...)
Normand Leclerc
leclercn@videotron.ca
--------------050107070900010304000502
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
deny tcp from any to any 113 in\^[[11;1H01900 0 0 deny udp from any to any 137 in\^[[12;1H01900 0 0 deny tcp from any to any 139 in\^[[25;8H\^[[m\^[[7m
sio1: 1 more silo overflow (total 3)
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 2
done
Uptime: 2d9h11m3s
Rebooting...
Unrecognized boot flag '0'.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-BETA #2: Sun Mar 11 16:17:14 EST 2001
root@atom.quanta.ca:/usr/src/sys/compile/ATOM
EB164
Digital AlphaPC 164SX 533 MHz, 531MHz
8192 byte page size, 1 processor.
CPU: PCA56 (21164PC) major=9 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000600020117
real memory = 132046848 (128952K bytes)
avail memory = 124321792 (121408K bytes)
Preloaded elf kernel "kernel" at 0xfffffc000056c000.
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1100-0x117f mem 0x82056000-0x8205607f irq 9 at device 5.0 on pci0
xl0: interrupting at CIA irq 9
xl0: Ethernet address: 00:50:04:75:94:0c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x1000-0x10ff mem 0x82054000-0x82054fff irq 11 at device 6.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: interrupting at CIA irq 11
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 7.0 irq 10
isab0: <Cypress 82C693 PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Cypress 82C693 ATA controller> at 8.1
pci0: <Cypress 82C693 ATA controller> at 8.2
pci0: <Cypress 82C693 ATA controller> at 8.3
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20020 on isa0
sio0: type ST16650A
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x20000 on isa0
sio1: type ST16650A
sio1: interrupting at ISA irq 3
sio2 at port 0x3e8-0x3ef irq 5 flags 0x20000 on isa0
sio2: type ST16650A
sio2: interrupting at ISA irq 5
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppc0: interrupting at ISA irq 7
Timecounter "alpha" frequency 533169056 Hz
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da1a
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST19101N 0011> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 8683MB (17783240 512 byte sectors: 64H 32S/T 8683C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST32550N 0016> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2047MB (4194058 512 byte sectors: 64H 32S/T 2047C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <YAMAHA CRW8424S 1.0j> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ccd0-3: Concatenated disk drivers
cd1 at ahc0 bus 0 target 6 lun 0
cd1: <NEC CD-ROM DRIVE:222 3.0i> Removable CD-ROM SCSI-2 device
cd1: 8.064MB/s transfers (8.064MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
xl0: transmission error: 90
xl0: tx underrun, increasing tx start threshold to 120 bytes
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 12 1
done
Uptime: 21m3s
Rebooting...
Unrecognized boot flag '0'.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-BETA #3: Thu Mar 15 17:29:49 EST 2001
root@atom.quanta.ca:/usr/src/sys/compile/ATOM
EB164
Digital AlphaPC 164SX 533 MHz, 531MHz
8192 byte page size, 1 processor.
CPU: PCA56 (21164PC) major=9 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000600020117
real memory = 132046848 (128952K bytes)
avail memory = 124338176 (121424K bytes)
Preloaded elf kernel "kernel" at 0xfffffc000056e000.
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1100-0x117f mem 0x82056000-0x8205607f irq 9 at device 5.0 on pci0
xl0: interrupting at CIA irq 9
xl0: Ethernet address: 00:50:04:75:94:0c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x1000-0x10ff mem 0x82054000-0x82054fff irq 11 at device 6.0 on pci0
aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: interrupting at CIA irq 11
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 7.0 irq 10
isab0: <Cypress 82C693 PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Cypress 82C693 ATA controller> at 8.1
pci0: <Cypress 82C693 ATA controller> at 8.2
pci0: <Cypress 82C693 ATA controller> at 8.3
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20010 on isa0
sio0: type ST16650A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x20000 on isa0
sio1: type ST16650A
sio1: interrupting at ISA irq 3
sio2 at port 0x3e8-0x3ef irq 5 flags 0x20000 on isa0
sio2: type ST16650A
sio2: interrupting at ISA irq 5
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppc0: interrupting at ISA irq 7
Timecounter "alpha" frequency 533170336 Hz
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da1a
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST19101N 0011> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 8683MB (17783240 512 byte sectors: 64H 32S/T 8683C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST32550N 0016> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2047MB (4194058 512 byte sectors: 64H 32S/T 2047C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <YAMAHA CRW8424S 1.0j> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ccd0-3: Concatenated disk drivers
xl0: transmission error: 90
xl0: tx underrun, increasing tx start threshold to 120 bytes
cd1 at ahc0 bus 0 target 6 lun 0
cd1: <NEC CD-ROM DRIVE:222 3.0i> Removable CD-ROM SCSI-2 device
cd1: 8.064MB/s transfers (8.064MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
--------------050107070900010304000502
Content-Type: text/plain;
name="ATOM"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="ATOM"
machine alpha
cpu EV5
ident GENERIC
maxusers 32
options DEC_EB164 # EB164, PC164, PC164LX, PC164SX
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
#options MFS #Memory Filesystem
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device
#options CD9660 #ISO 9660 Filesystem
#options CD9660_ROOT #CD-ROM usable as root device
#options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=8000 #Delay (in ms) before probing SCSI
#options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
# Standard busses
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
#device ata
#device atadisk # ATA disk drives
#device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_ALLOW_MEMIO
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
#pseudo-device vinum 4
#pseudo-device ccd 4
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
#device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# real time clock
device mcclock0 at isa? port 0x70
# Serial (COM) ports
device sio0 at isa? port IO_COM1 irq 4 flags 0x20010
device sio1 at isa? port IO_COM2 irq 3 flags 0x20000
device sio2 at isa? port IO_COM3 irq 5 flags 0x20000
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
#pseudo-device ppp 1 # Kernel PPP
#pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
#pseudo-device md # Memory "disks"
#pseudo-device gif 4 # IPv6 and IPv4 tunneling
#pseudo-device faith 1 # IPv6-to-IPv4 relaying/(translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf 4 #Berkeley packet filter
--------------050107070900010304000502--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AB148BC.5020106>