Date: Wed, 6 Jun 2001 17:07:34 -0500 From: "John Mire" <jmire@att.net> To: <questions@freebsd.org> Subject: Problems booting 4.3 after clean install Message-ID: <DAC809EAC7E4594AA0696EF512F6ABF104521A66@sh-exch>
next in thread | raw e-mail | index | archive | help
Problem Discription: cable-modem firewall machine running 3.5.1-Release with no problems. Complete CLEAN-reinstall of 4.3-Release is sucessful. Reboot of system results in system hanging after system check, like it can't find the hard-drive. but reinstallation of 3.5.1-RELEASE works fine. I suspect that I need to configure the new bootloader in some fashion to mimic the 3.X behavior? Solutions tried: relabel hard-drive and tried bootloader no bootloader-just mbr Dedicated and Other-OS compatible partition entries. I have disabled all the obvious extraneous devices not used including all the mouse, serial and printer ports, thinking there might be a device conflict. Hardware: Gateway 486-66 16Mb RAM, CDROM,500 Mb HD with integrated IDE controller, mach video card, (2) 3c509, built-in serial(2) parallel (1) Any insight would be useful. Thanks. \john -- John Mire: jmire@lsuhsc.edu LSU Health Sciences Center - Shreveport Network Administration The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DAC809EAC7E4594AA0696EF512F6ABF104521A66>