Date: Fri, 7 Jan 2005 23:13:42 +0100 From: =?utf-8?B?QmrDtnJuIEvDtm5pZw==?= <bkoenig@cs.tu-berlin.de> To: <freebsd-mobile@freebsd.org> Subject: Re: PCCard bus don't work Message-ID: <20050107221245.781F1CCE0D5@mail.alpha-tierchen.de>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0000_01C4F50E.87A4FAA0
Content-Type: text/plain;
charset="utf-8"
Content-Transfer-Encoding: quoted-printable
@ Kevin: It didn't work. :(
@ John: I attached the output.
Bj=C3=B6rn
------=_NextPart_000_0000_01C4F50E.87A4FAA0
Content-Type: application/octet-stream;
name="boot_verbose"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="boot_verbose"
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009fc00=0A=
SMAP type=3D02 base=3D000000000009fc00 len=3D0000000000000400=0A=
SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000=0A=
SMAP type=3D01 base=3D0000000000100000 len=3D0000000005700000=0A=
SMAP type=3D02 base=3D00000000fffe0000 len=3D0000000000020000=0A=
Copyright (c) 1992-2004 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004=0A=
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC=0A=
Preloaded elf kernel "/kernel" at 0xc0e5b000.=0A=
Preloaded elf module "/acpi.ko" at 0xc0e5b198.=0A=
Preloaded mfs_root "/mfsroot" at 0xc0e5b238.=0A=
Calibrating clock(s) ... i8254 clock: 1193138 Hz=0A=
CLK_USE_I8254_CALIBRATION not specified - using default frequency=0A=
Timecounter "i8254" frequency 1193182 Hz quality 0=0A=
Calibrating TSC clock ... TSC clock: 165790184 Hz=0A=
CPU: Pentium/P55C (165.79-MHz 586-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x544 Stepping =3D 4=0A=
Features=3D0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>=0A=
real memory =3D 92274688 (88 MB)=0A=
Physical memory chunk(s):=0A=
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)=0A=
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)=0A=
0x0000000001026000 - 0x0000000005643fff, 73523200 bytes (17950 pages)=0A=
avail memory =3D 76550144 (73 MB)=0A=
bios32: Found BIOS32 Service Directory header at 0xc00fd8e0=0A=
bios32: Entry =3D 0xfd8f0 (c00fd8f0) Rev =3D 0 Len =3D 1=0A=
pcibios: PCI BIOS entry at 0xfd930+0x0=0A=
pnpbios: Found PnP BIOS data at 0xc00fe700=0A=
pnpbios: Entry =3D f0000:e724 Rev =3D 1.0=0A=
pnpbios: Event flag at 415=0A=
Other BIOS signatures found:=0A=
Intel Pentium detected, installing workaround for F00F bug=0A=
wlan: <802.11 Link Layer>=0A=
random: <entropy source, Software, Yarrow>=0A=
io: <I/O>=0A=
mem: <memory>=0A=
null: <null device, zero device>=0A=
ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, =
AE_NO_ACPI_TABLES=0A=
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: =
AE_NO_ACPI_TABLES=0A=
ACPI: table load failed: AE_NO_ACPI_TABLES=0A=
npx0: [FAST]=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000050=0A=
pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A=
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D12358086)=0A=
pcibios: BIOS version 2.10=0A=
pcib0: <Host to PCI bridge> pcibus 0 on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
pci0: physical bus=3D0=0A=
found-> vendor=3D0x8086, dev=3D0x1235, revid=3D0x02=0A=
bus=3D0, slot=3D0, func=3D0=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0006, statreg=3D0x2200, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
found-> vendor=3D0x8086, dev=3D0x122e, revid=3D0x02=0A=
bus=3D0, slot=3D1, func=3D0=0A=
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
map[10]: type 1, range 32, base 10811000, size 12, enabled=0A=
found-> vendor=3D0x104c, dev=3D0xac12, revid=3D0x04=0A=
bus=3D0, slot=3D2, func=3D0=0A=
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x0200, cachelnsz=3D8 (dwords)=0A=
lattimer=3D0xa8 (5040 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 =
ns)=0A=
intpin=3Da, irq=3D255=0A=
map[10]: type 1, range 32, base 10810000, size 12, enabled=0A=
found-> vendor=3D0x104c, dev=3D0xac12, revid=3D0x04=0A=
bus=3D0, slot=3D2, func=3D1=0A=
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x0200, cachelnsz=3D8 (dwords)=0A=
lattimer=3D0xa8 (5040 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x00 (0 =
ns)=0A=
intpin=3Db, irq=3D255=0A=
map[10]: type 1, range 32, base 08000000, size 22, enabled=0A=
map[14]: type 1, range 32, base 08400000, size 16, enabled=0A=
map[18]: type 1, range 32, base 08800000, size 22, enabled=0A=
found-> vendor=3D0x1023, dev=3D0x9660, revid=3D0xd3=0A=
bus=3D0, slot=3D3, func=3D0=0A=
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D11=0A=
isab0: <PCI-ISA bridge> at device 1.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
cbb0: <TI1130 PCI-CardBus Bridge> mem 0x10811000-0x10811fff at device =
2.0 on pci0=0A=
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x10811000=0A=
cardbus0: <CardBus bus> on cbb0=0A=
pccard0: <16-bit PCCard bus> on cbb0=0A=
cbb: Unable to map IRQ...=0A=
device_attach: cbb0 attach returned 12=0A=
cbb1: <TI1130 PCI-CardBus Bridge> mem 0x10810000-0x10810fff at device =
2.1 on pci0=0A=
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x10810000=0A=
cardbus1: <CardBus bus> on cbb1=0A=
pccard1: <16-bit PCCard bus> on cbb1=0A=
cbb: Unable to map IRQ...=0A=
device_attach: cbb1 attach returned 12=0A=
pci0: <display, VGA> at device 3.0 (no driver attached)=0A=
cpu0 on motherboard=0A=
Trying Read_Port at 203=0A=
Trying Read_Port at 243=0A=
Trying Read_Port at 283=0A=
Trying Read_Port at 2c3=0A=
Trying Read_Port at 303=0A=
Trying Read_Port at 343=0A=
Trying Read_Port at 383=0A=
Trying Read_Port at 3c3=0A=
ex_isa_identify()=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
pnpbios: 16 devices, largest 102 bytes=0A=
PNP0200: adding fixed io range 0-0xf, size=3D0x10, align=3D0x1=0A=
PNP0200: adding fixed io range 0x80-0x8f, size=3D0x10, align=3D0x1=0A=
PNP0200: adding fixed io range 0xc0-0xdf, size=3D0x20, align=3D0x1=0A=
PNP0200: adding dma mask 0x10=0A=
pnpbios: handle 1 device ID PNP0200 (0002d041)=0A=
PNP0100: adding irq mask 0x1=0A=
PNP0100: adding fixed io range 0x40-0x43, size=3D0x4, align=3D0x1=0A=
pnpbios: handle 2 device ID PNP0100 (0001d041)=0A=
PNP0b00: adding irq mask 0x100=0A=
PNP0b00: adding fixed io range 0x70-0x71, size=3D0x2, align=3D0x1=0A=
pnpbios: handle 3 device ID PNP0b00 (000bd041)=0A=
PNP0303: adding irq mask 0x2=0A=
PNP0303: adding fixed io range 0x60-0x60, size=3D0x1, align=3D0x1=0A=
PNP0303: adding fixed io range 0x64-0x64, size=3D0x1, align=3D0x1=0A=
pnpbios: handle 4 device ID PNP0303 (0303d041)=0A=
PNP0f13: adding irq mask 0x1000=0A=
pnpbios: handle 5 device ID PNP0f13 (130fd041)=0A=
PNP0c04: adding fixed io range 0xf0-0xff, size=3D0x10, align=3D0x1=0A=
PNP0c04: adding irq mask 0x2000=0A=
pnpbios: handle 6 device ID PNP0c04 (040cd041)=0A=
PNP0700: adding irq mask 0x40=0A=
PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0=0A=
PNP0700: adding io range 0x3f7-0x3f7, size=3D0x1, align=3D0=0A=
PNP0700: adding dma mask 0x4=0A=
pnpbios: handle 7 device ID PNP0700 (0007d041)=0A=
PNP0680: adding irq mask 0x4000=0A=
PNP0680: adding io range 0x1f0-0x1f7, size=3D0x8, align=3D0x1=0A=
PNP0680: adding io range 0x3f6-0x3f6, size=3D0x1, align=3D0x1=0A=
PNP0680: adding io range 0xfcf0-0xfcf7, size=3D0x8, align=3D0x1=0A=
pnpbios: handle 8 device ID PNP0680 (8006d041)=0A=
pnpbios: handle 13 device ID PNP0a03 (030ad041)=0A=
PNP0c02: adding io range 0x61-0x61, size=3D0x1, align=3D0=0A=
PNP0c02: adding io range 0x92-0x92, size=3D0x1, align=3D0=0A=
PNP0c02: adding io range 0x94-0x94, size=3D0x1, align=3D0=0A=
PNP0c02: adding io range 0x100-0x107, size=3D0x8, align=3D0=0A=
PNP0c02: adding io range 0x26e-0x26f, size=3D0x2, align=3D0=0A=
PNP0c02: adding io range 0xd00-0xd01, size=3D0x2, align=3D0=0A=
PNP0c02: adding io range 0x15e8-0x15ef, size=3D0x8, align=3D0=0A=
pnpbios: handle 16 device ID PNP0c02 (020cd041)=0A=
pnpbios: handle 17 device ID PNP0400 (0004d041)=0A=
PNP0501: adding irq mask 0x10=0A=
PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0=0A=
pnpbios: handle 19 device ID PNP0501 (0105d041)=0A=
pnpbios: handle 20 device ID IBM0070 (70004d24)=0A=
pnpbios: handle 22 device ID ESS1681 (81167316)=0A=
PNP0e03: adding io range 0x3e0-0x3e1, size=3D0x2, align=3D0=0A=
pnpbios: handle 25 device ID PNP0e03 (030ed041)=0A=
sc: sc0 already exists; skipping it=0A=
vga: vga0 already exists; skipping it=0A=
isa_probe_children: disabling PnP devices=0A=
isa_probe_children: probing non-PnP devices=0A=
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0=0A=
pmtimer0 on isa0=0A=
adv0: not probed (disabled)=0A=
aha0: not probed (disabled)=0A=
aic0: not probed (disabled)=0A=
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0=0A=
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00=0A=
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A=
ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0A=
ata0: reset tp2 stat0=3D50 stat1=3D00 =
devices=3D0x9<ATAPI_SLAVE,ATA_MASTER>=0A=
ata0: [MPSAFE]=0A=
ata1 at port 0x376,0x170-0x177 irq 15 on isa0=0A=
ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff=0A=
ata1: [MPSAFE]=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
atkbd: the current kbd controller command byte 0045=0A=
atkbd: keyboard ID 0x54ab (2)=0A=
kbdc: RESET_KBD return code:00fa=0A=
kbdc: RESET_KBD status:00aa=0A=
kbd0 at atkbd0=0A=
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000=0A=
atkbd0: [GIANT-LOCKED]=0A=
psm0: current command byte:0045=0A=
kbdc: TEST_AUX_PORT status:0000=0A=
kbdc: RESET_AUX return code:00fa=0A=
kbdc: RESET_AUX status:00aa=0A=
kbdc: RESET_AUX ID:0000=0A=
kbdc: RESET_AUX return code:00fa=0A=
kbdc: RESET_AUX status:00aa=0A=
kbdc: RESET_AUX ID:0000=0A=
psm: status 00 02 64=0A=
psm: status 00 00 64=0A=
psm: status 00 03 64=0A=
psm: status 00 03 64=0A=
psm: data 08 00 00=0A=
psm: status 10 00 64=0A=
psm: status 00 02 64=0A=
psm: status 00 02 64=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: [GIANT-LOCKED]=0A=
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons=0A=
psm0: config:00000000, flags:00000008, packet size:3=0A=
psm0: syncmask:c0, syncbits:00=0A=
bt0: not probed (disabled)=0A=
cs0: not probed (disabled)=0A=
ed0: not probed (disabled)=0A=
fdc0: ic_type 90 part_id 73=0A=
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on =
isa0=0A=
fdc0: ic_type 90 part_id 73=0A=
fdc0: [MPSAFE]=0A=
fdc0: [FAST]=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
fe0: not probed (disabled)=0A=
ie0: not probed (disabled)=0A=
lnc0: not probed (disabled)=0A=
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0=0A=
pcic1: not probed (disabled)=0A=
ppc0: parallel port not found.=0A=
ppc0: <Parallel port> failed to probe at irq 7 on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x100>=0A=
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)=0A=
sio0: irq maps: 0x1 0x11 0x1 0x1=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A, console=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
sio1: port may not be enabled=0A=
sio1: irq maps: 0x1 0x1 0x1 0x1=0A=
sio1: probe failed test(s): 0 1 2 4 6 7 9=0A=
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio2: not probed (disabled)=0A=
sio3: not probed (disabled)=0A=
sn0: not probed (disabled)=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
fb0: vga0, vga, type:VGA (5), flags:0x7007f=0A=
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000=0A=
fb0: init mode:24, bios mode:3, current mode:24=0A=
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k=0A=
VGA parameters upon power-up=0A=
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
VGA parameters in BIOS for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
EGA/VGA parameters to be used for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
vt0: not probed (disabled)=0A=
isa_probe_children: probing PnP devices=0A=
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is =
0x100. Failing probe.=0A=
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is =
0x100. Failing probe.=0A=
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is =
0x100. Failing probe.=0A=
unknown: <PNP0303> can't assign resources (port)=0A=
unknown: <PNP0303> at port 0x60 on isa0=0A=
unknown: <PNP0f13> can't assign resources (irq)=0A=
unknown: <PNP0f13> at irq 12 on isa0=0A=
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is =
0x100. Failing probe.=0A=
unknown: <PNP0700> can't assign resources (port)=0A=
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0=0A=
unknown: <PNP0680> can't assign resources (port)=0A=
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0=0A=
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is =
0x100. Failing probe.=0A=
ppc1: parallel port not found.=0A=
unknown: <Standard parallel printer port> failed to probe on isa0=0A=
unknown: <PNP0501> can't assign resources (port)=0A=
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0=0A=
unknown: <IBM0070> failed to probe on isa0=0A=
unknown: <ESS1681> failed to probe on isa0=0A=
adv1: Invalid baseport of 0x3e0 specified. Nearest valid baseport is =
0x330. Failing probe.=0A=
unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 on isa0=0A=
Device configuration finished.=0A=
procfs registered=0A=
Timecounter "TSC" frequency 165790184 Hz quality 800=0A=
Timecounters tick every 10.000 msec=0A=
lo0: bpf attached=0A=
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc0a217f0=0A=
ata0-slave: pio=3D0x0b wdma=3D0xffffffff udma=3D0xffffffff cable=3D40pin=0A=
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000=0A=
GEOM: Configure md0a, start 0 length 4423680 end 4423679=0A=
GEOM: Configure md0c, start 0 length 4423680 end 4423679=0A=
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin=0A=
ad0: <IBM-DCRA-22110/A83AD5> ATA-3 disk at ata0-master=0A=
ad0: 2016MB (4128768 sectors), 4096 C, 16 H, 63 S, 512 B=0A=
ad0: 16 secs/int, 1 depth queue, PIO4=0A=
ar: FreeBSD check1 failed=0A=
acd0: <SANYO CRD-S58P/1.21> CDROM drive at ata0 as slave=0A=
acd0: read 1377KB/s (1377KB/s), 256KB buffer, PIO3=0A=
acd0: Reads:=0A=
acd0: Writes:=0A=
acd0: Audio: play, 256 volume levels=0A=
acd0: Mechanism: ejectable tray, unlocked=0A=
acd0: Medium: no/blank disc=0A=
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000=0A=
GEOM: Configure fd0a, start 0 length 1474560 end 1474559=0A=
GEOM: Configure fd0c, start 0 length 1474560 end 1474559=0A=
GEOM: new disk ad0=0A=
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:4128705=0A=
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0=0A=
GEOM: Configure ad0s1, start 32256 length 2113896960 end 2113929215=0A=
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727=0A=
GEOM: Configure ad0s1b, start 134217728 length 168411136 end 302628863=0A=
GEOM: Configure ad0s1c, start 0 length 2113896960 end 2113896959=0A=
GEOM: Configure ad0s1e, start 302628864 length 268435456 end 571064319=0A=
GEOM: Configure ad0s1f, start 571064320 length 268435456 end 839499775=0A=
GEOM: Configure ad0s1g, start 839499776 length 1274397184 end 2113896959=0A=
Mounting root from ufs:/dev/md0=0A=
start_init: trying /sbin/init=0A=
start_init: trying /sbin/oinit=0A=
start_init: trying /sbin/init.bak=0A=
start_init: trying /stand/sysinstall=0A=
/stand/sysinstall running as init on serial console=0A=
=0A=
------=_NextPart_000_0000_01C4F50E.87A4FAA0--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050107221245.781F1CCE0D5>