Date: Tue, 31 Mar 1998 09:14:42 -0700 From: Nate Williams <nate@mt.sri.com> To: Matthias.Apitz@SOFTCON.de (Matthias Apitz) Cc: nate@mt.sri.com (Nate Williams), freebsd-mobile@FreeBSD.ORG Subject: Re: 3c589D and pccard support in FreeBSD 2.2.5 Message-ID: <199803311614.JAA11050@mt.sri.com> In-Reply-To: <9803311804.AA11373@kant.SOFTCON.de> References: <199803301639.JAA07159@mt.sri.com> <9803311804.AA11373@kant.SOFTCON.de>
next in thread | previous in thread | raw e-mail | index | archive | help
> > I'm trying to install PAO card support on my new notebook > > which has an O2Micro 6832 CardBus bridge and a 3Com 3c589D > > card attached. The FreeBSD is 2.2.5 from CD-ROM together > > with the PAO-ready boot-diskette. > > FWIW, this hardware should be supported 'out of the box' with the LAPTOP > kernel in FreeBSD 2.2.6. > > BTW: does the FreeBSD 2.2.6. boot.flp contain the support > for the above hardware also? It should, if you can figure out the hardware settings saved in the card's EEPROM. > and 7 were attached via pccardd(8) to the card but with > slow network performance (ping delays of ~1.600 ms). It's probably not a mis-configured IRQ then. > I checked the same BIOS setup with the Linux boot diskette > and the Linux cardservice uses IRQ 3 for the 3C589D and > after running ifconfig(8) for the interface all was fine. No delays in Linux? This one has me stumped. Mike? Nate To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199803311614.JAA11050>