Date: Wed, 21 Jul 1999 19:35:15 -0700 From: Norbert Papke <npapke@acm.org> To: freebsd-stable@freebsd.org Subject: Panic During Boot with FreeBSD-Stable 3.2 Message-ID: <37968362.A326C51D@acm.org>
next in thread | raw e-mail | index | archive | help
I cvsup'ed stable last night. Did a 'make world' and rebuilt my
kernel. Now, when I boot, I get a large number of "DMA failure.
DMA Status 5 <active>" followed by a "Panic locmgr non-zero exclusive
count". Does anyone have an idea as to what might be going on?
My previous cvsup was about a week ago. Below please find the dmesg
output for my latest working kernel.
Regards,
-- Norbert.
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 3.2-STABLE #21: Fri Jul 16 13:56:09 PDT 1999
npapke@localhost:/usr/src/sys/compile/NGP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 67108864 (65536K bytes)
avail memory = 62734336 (61264K bytes)
Preloaded elf kernel "kernel.old" at 0xc026b000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
es1: <AudioPCI ES1370> rev 0x01 int a irq 11 on pci0.15.0
pcm1: using I/O space register mapping at 0xe400
Probing for devices on PCI bus 1:
vga0: <ATI model 4742 graphics accelerator> rev 0x5c int a irq 11 on
pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pcm0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xb0ffb0ff on isa
wdc0: unit 0 (wd0): <WDC AC28400R>, LBA, DMA, 32-bit, multi-block-16
wd0: 8063MB (16514064 sectors), 1027 cyls, 255 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <ATAPI CD-ROM DRIVE 40X MAXIMUM/T0BP>, removable,
dma, ior
dis
acd0: drive speed 6890KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppb0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 710C> SCP,VLINK
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 flags 0x11 on isa
apm: found APM BIOS version 1.2
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled
, logging disabled
changing root device to wd0s1a
ffs_mountfs: superblock updated for soft updates
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37968362.A326C51D>