Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 1 Jan 2000 10:25:21 -0600 (CST)
From:      Karl Denninger <karl@Denninger.Net>
To:        FreeBSD-gnats-submit@freebsd.org
Subject:   ports/15822: Update port misc/HomeDaemon to V0.99
Message-ID:  <200001011625.KAA46383@Genesis.Denninger.Net>

next in thread | raw e-mail | index | archive | help

>Number:         15822
>Category:       ports
>Synopsis:       Update port misc/HomeDaemon to V0.99
>Confidential:   yes
>Severity:       serious
>Priority:       high
>Responsible:    freebsd-ports
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Jan  1 08:30:00 PST 2000
>Closed-Date:
>Last-Modified:
>Originator:     Karl Denninger
>Release:        FreeBSD 4.0-CURRENT i386
>Organization:
Karls Sushi and Packet Smashers
>Environment:

	HomeDaemon 0.98 and earlier 

>Description:

	HomeDaemon 0.98 and earlier WILL NOT OPERATE with Dan Lancini's
	current x10d_cm11 code.  He has made a change to the code that
	changes the internal communication protocol slightly for extended
	commands; this was not supported in 0.98 and earlier revisions.

	0.99 supports BOTH old and new x10d protocols via a define in defs.h.

	Also note that the PLIST has been modified to DELIBERATELY leave
	the (small) config database on the system if the port is de-installed.
	Testing revealed that you could lose ALL of your localized settings
	(including event lists that might have taken you hundreds of hours
	to develop!) if you had to re-install the port for some reason 
	(which requires a deinstall/reinstall).  As such I have removed
	the PLIST entries that remove the shared directory to prevent this
	disaster.

	(Please note that I still don't see this port in the CVS tree,
	although I DID see the "committed, thanks!" note on the original
	submission a few days back!  Please check this - thank you)

>How-To-Repeat:

	See above.

>Fix:

Replace port with 0.99 version below.  0.98 has been recalled and removed.

# This is a shell archive.  Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file".  Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
#	.
#	./Makefile
#	./files
#	./files/md5
#	./pkg
#	./pkg/COMMENT
#	./pkg/DESCR
#	./pkg/PLIST
#
echo c - .
mkdir -p . > /dev/null 2>&1
echo x - ./Makefile
sed 's/^X//' >./Makefile << 'END-of-./Makefile'
X# New ports collection makefile for:   HomeDaemon
X# Version required:    0.99
X# Date created:        1 January 2000
X# Whom:                Karl Denninger
X#
X# $FreeBSD$
X#
X
XDISTNAME=	HomeDaemon-0.99
XCATEGORIES=	misc
XMASTER_SITES=	http://genesis.denninger.net/
X
XMAINTAINER=	HomeDaemon@denninger.net
X
XNO_CDROM="No commercial sale w/o permission; see README"
X
X.include <bsd.port.mk>
END-of-./Makefile
echo c - ./files
mkdir -p ./files > /dev/null 2>&1
echo x - ./files/md5
sed 's/^X//' >./files/md5 << 'END-of-./files/md5'
XMD5 (HomeDaemon-0.99.tar.gz) = fb34fe831e34259a34e6e74667a38145
END-of-./files/md5
echo c - ./pkg
mkdir -p ./pkg > /dev/null 2>&1
echo x - ./pkg/COMMENT
sed 's/^X//' >./pkg/COMMENT << 'END-of-./pkg/COMMENT'
XHome automation software that runs on FreeBSD (see the README)
END-of-./pkg/COMMENT
echo x - ./pkg/DESCR
sed 's/^X//' >./pkg/DESCR << 'END-of-./pkg/DESCR'
X* HomeDaemon - Home Automation Software for FreeBSD
X* Supports the CM11A X10 powerline interface and Applied Digital's protocol
X* VERSION 0.99
X*
X* NOTE!  BETA SOFTWARE!  USE AT YOUR OWN RISK!
X*
X* This entire software package is Copyright 1999 Karl Denninger
X* All rights reserved.
X*
X* RESTRICTED RIGHTS - SEE THE README FILE FOR MORE INFORMATION
X
XThis package requires:
X
X1.	A free serial port (to connect the CM11A computer interface) and
X	(optionally) a second port for an Applied Digital RS-422 bridge
X2.	A CM11A (you can obtain one from Radio Shack or http://www.x10.com)
X	and (optional) the Applied Digital Bridge (for ADICON support)
X3.	Dan Lancini's "x10d" package (see above)
X
XCURRENT code is available at http://genesis.denninger.net
X
XONE FINAL WARNING - IF YOU DO NOT LOOK AT THE README FILE, THIS PORT 
XWILL NOT WORK!  REQUIRED CONFIGURATION INFORMATION IS IN THAT FILE!
X
X- Karl Denninger
Xkarl@denninger.net
END-of-./pkg/DESCR
echo x - ./pkg/PLIST
sed 's/^X//' >./pkg/PLIST << 'END-of-./pkg/PLIST'
Xetc/rc.d/HomeDaemon.rc
Xbin/appdig-clear
Xbin/appdig-setup
Xbin/HomeDaemon-appdig
Xbin/HomeDaemon-dump
Xbin/HomeDaemon-events
Xbin/HomeDaemon-parse
Xbin/HomeDaemon-shmem
Xbin/HomeDaemon-status.cgi
END-of-./pkg/PLIST
exit



>Release-Note:
>Audit-Trail:
>Unformatted:


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200001011625.KAA46383>