Date: Sun, 16 Jun 2002 16:11:51 +0200 From: Niek Bergboer <niek@wit379119.student.utwente.nl> To: freebsd-stable@freebsd.org Subject: My gif0 interface Message-ID: <20020616141156.022E15497@wit379119.student.utwente.nl>
next in thread | raw e-mail | index | archive | help
Why is it that despite I've got gif and ipsec support compiled into my=20 kernel, I don't have a gif0 interface? My kernel config looks like this: machine=09=09i386 cpu=09=09I586_CPU ident=09=09WUTRA1 maxusers=0964 #makeoptions=09DEBUG=3D-g=09=09#Build kernel with gdb(1) debug symbols options =09MATH_EMULATE=09=09#Support for x87 emulation options =09INET=09=09=09#InterNETworking options =09INET6=09=09=09#IPv6 communications protocols options =09FFS=09=09=09#Berkeley Fast Filesystem options =09FFS_ROOT=09=09#FFS usable as root device [keep this!] options =09SOFTUPDATES=09=09#Enable FFS soft updates support options =09MFS=09=09=09#Memory Filesystem options =09MD_ROOT=09=09=09#MD is a potential root device options =09NFS=09=09=09#Network Filesystem options =09NFS_ROOT=09=09#NFS usable as root device, NFS required options =09MSDOSFS=09=09=09#MSDOS Filesystem options=09=09SMBFS=09=09=09#SMB/CIFS filesystem options =09CD9660=09=09=09#ISO 9660 Filesystem options =09CD9660_ROOT=09=09#CD-ROM usable as root, CD9660 required options =09PROCFS=09=09=09#Process filesystem options =09COMPAT_43=09=09#Compatible with BSD 4.3 [KEEP THIS!] options =09SCSI_DELAY=3D15000=09#Delay (in ms) before probing SCSI options =09UCONSOLE=09=09#Allow users to grab the console options =09USERCONFIG=09=09#boot -c editor options =09VISUAL_USERCONFIG=09#visual boot -c editor options =09KTRACE=09=09=09#ktrace(1) support options =09SYSVSHM=09=09=09#SYSV-style shared memory options =09SYSVMSG=09=09=09#SYSV-style message queues options =09SYSVSEM=09=09=09#SYSV-style semaphores options =09P1003_1B=09=09#Posix P1003_1B real-time extensions options =09_KPOSIX_PRIORITY_SCHEDULING options=09=09ICMP_BANDLIM=09=09#Rate limit bad replies options =09KBD_INSTALL_CDEV=09# install a CDEV entry in /dev options =09UFS_DIRHASH=09=09#Improve performance on big directories options =09IPFIREWALL=09=09# Firewall options =09IPFIREWALL_FORWARD=09#enable transparent proxy support options =09IPDIVERT=09=09#divert sockets options =09IPFILTER=09=09#ipfilter support options =09IPFILTER_LOG=09=09#ipfilter logging options =09IPFIREWALL_VERBOSE_LIMIT=3D100=09#limit verbosity #options =09IPV6FIREWALL=09=09#firewall for IPv6 #options =09IPV6FIREWALL_VERBOSE #options =09IPV6FIREWALL_VERBOSE_LIMIT=3D100 #options =09IPV6FIREWALL_DEFAULT_TO_ACCEPT options =09IPSTEALTH=09=09#support for stealth forwarding options =09TCPDEBUG options =09IPSEC=09=09=09#IP security options =09IPSEC_ESP=09=09#IP security (crypto; define w/ IPSEC) options =09IPSEC_DEBUG=09=09#debug for IP security device=09=09isa device=09=09pci # Floppy drives device=09=09fdc0=09at isa? port IO_FD1 irq 6 drq 2 device=09=09fd0=09at fdc0 drive 0 # ATA and ATAPI devices device=09=09ata0=09at isa? port IO_WD1 irq 14 device=09=09ata1=09at isa? port IO_WD2 irq 15 device=09=09ata device=09=09atadisk=09=09=09# ATA disk drives #device=09=09atapicd=09=09=09# ATAPI CDROM drives #device=09=09atapifd=09=09=09# ATAPI floppy drives #device=09=09atapist=09=09=09# ATAPI tape drives options =09ATA_STATIC_ID=09=09#Static device numbering #options =09ATA_ENABLE_ATAPI_DMA=09#Enable DMA on ATAPI devices #options=09=09ATA_ENABLE_WC #Enable write caching on ATA disks #options =09ATA_ENABLE_TAGS =09#Enable tagged queuing on some devices # atkbdc0 controls both the keyboard and the PS/2 mouse device=09=09atkbdc0=09at isa? port IO_KBD device=09=09atkbd0=09at atkbdc? irq 1 flags 0x1 #device=09=09psm0=09at atkbdc? irq 12 device=09=09vga0=09at isa? # splash screen/screen saver pseudo-device=09splash # syscons is the default console driver, resembling an SCO console device=09=09sc0=09at isa? flags 0x100 # Floating point support - do not disable. device=09=09npx0=09at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device=09=09apm0 at nexus? disable flags 0x20 # Advanced Power Managem= ent # Serial (COM) ports device=09=09sio0=09at isa? port IO_COM1 flags 0x10 irq 4 #device=09=09sio1=09at isa? port IO_COM2 irq 3 # Parallel port device=09=09ppc0=09at isa? irq 7 device=09=09ppbus=09=09# Parallel port bus (required) device=09=09lpt=09=09# Printer #device=09=09plip=09=09# TCP/IP over parallel #device=09=09ppi=09=09# Parallel port interface device #device=09=09vpo=09=09# Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NI= Cs! device=09=09miibus=09=09# MII bus support device=09=09dc=09=09# DEC/Intel 21143 and various workalikes # Pseudo devices - the number indicates how many units to allocated. pseudo-device=09loop=09=09# Network loopback pseudo-device=09ether=09=09# Ethernet support #pseudo-device=09sl=091=09# Kernel SLIP #pseudo-device=09ppp=091=09# Kernel PPP pseudo-device=09tun=09=09# Packet tunnel. pseudo-device=09pty 128=09# Pseudo-ttys (telnet etc) pseudo-device=09md=09=09# Memory "disks" pseudo-device=09gif=094=09# IPv6 and IPv4 tunneling pseudo-device=09faith=091=09# IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device=09bpf=09=09#Berkeley packet filter device=09=09pcm0=09at pci? #device=09=09sbc0=09at isa? port 0x220 irq 5 drq 1 flags 0x15 # Disk quotas are supported when this option is enabled. options =09QUOTA=09=09=09#enable disk quotas # SMBFS support # Kernel side iconv library options =09LIBICONV # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBI= CONV # options. # NETSMBCRYPTO enables support for encrypted passwords. options =09NETSMB=09=09=09#SMB/CIFS requester options =09NETSMBCRYPTO=09=09#encrypted password support for SMB # mchain library. It can be either loaded as KLD or compiled into kernel options =09LIBMCHAIN=09=09#mbuf management library # The SMB filesystem options=09=09SMBFS # # SMB/CIFS requester # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBI= CONV # options. # NETSMBCRYPTO enables support for encrypted passwords. options =09NETSMB=09=09=09#SMB/CIFS requester options =09NETSMBCRYPTO=09=09#encrypted password support for SMB # mchain library. It can be either loaded as KLD or compiled into kernel options =09LIBMCHAIN=09=09#mbuf management library # Kernel side iconv library options =09LIBICONV However, ifconfig doesn't show the interface: dc0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 =09inet6 xxxx::xxx:xxxx:xxxx:xxxx%dc0 prefixlen 64 scopeid 0x1=20 =09inet 130.89.xxx.xxx netmask 0xffffe000 broadcast 130.89.xxx.xxx =09inet6 xxxx:xxx:xxxx:xxxx:xxx:xxxx:xxxx:xxxx prefixlen 64 autoconf=20 =09ether 00:80:48:b3:22:ee =09media: Ethernet autoselect (100baseTX <full-duplex>) =09status: active dc1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 =09inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 =09inet6 fe80::280:48ff:feb3:3414%dc1 prefixlen 64 scopeid 0x2=20 =09ether 00:80:48:b3:34:14 =09media: Ethernet autoselect (100baseTX <full-duplex>) =09status: active lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 =09inet6 ::1 prefixlen 128=20 =09inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3=20 =09inet 127.0.0.1 netmask 0xff000000=20 faith0: flags=3D8002<BROADCAST,MULTICAST> mtu 1500 And gifconfig doesn't find one either: gifconfig gif0 Any suggestions? TIA Niek To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020616141156.022E15497>