Date: Wed, 12 Mar 2014 17:09:03 GMT From: Troyax <troyax@pholos.eu> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/187488: Freebsd 10 install kernel rebooting the machine. Message-ID: <201403121709.s2CH93XH010367@cgiserv.freebsd.org> Resent-Message-ID: <201403121710.s2CHA0h2017452@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 187488
>Category: amd64
>Synopsis: Freebsd 10 install kernel rebooting the machine.
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Mar 12 17:10:00 UTC 2014
>Closed-Date:
>Last-Modified:
>Originator: Troyax
>Release: 10
>Organization:
>Environment:
NA
>Description:
When booting an install image of Freebsd 10 from an USB key (created as explained on the handbook), as it starts to boot the kernel my laptop suddenly reboot (I can't even clearly saw the "boot prompt" - before the numbers).
But I could boot and install the 9.2 image without any problem; I joined my current (9.2) dmesg.boot (my laptop is a HP EliteBook Folio 9470m).
As a side note, I also tried OpenBSD 5.4 which ended in the same reboot scenario - I just add few numbers (2 or 3 blocks) on my screen before the reboot.
>How-To-Repeat:
Boot a Freebsd 10 kernel from an USB key (no CD/DVD reader) on a HP EliteBook Folio 9470m (or at least mine).
I would happily help with some tests, although I need my laptop to continue to work (so mainly image booting test - probably no installation at the moment).
>Fix:
Patch attached with submission follows:
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-RELEASE-p3 #0: Sat Jan 11 03:25:02 UTC 2014
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Core(TM) i5-3437U CPU @ 1.90GHz (2394.61-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8080982016 (7706 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 18DF >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Cuse4BSD v0.1.30 @ /dev/cuse
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xd0720000-0xd072ffff irq 10 at device 20.0 on pci0
xhci0: 32 byte context size.
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2080-0x209f mem 0xd0700000-0xd071ffff,0xd073b000-0xd073bfff irq 17 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: XX:XX:XX:XX:XX:XX
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xd073a000-0xd073a3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xd0730000-0xd0733fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <base peripheral> at device 0.0 (no driver attached)
pci2: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xd0739000-0xd07393ff irq 16 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0x20a8-0x20af,0x20b4-0x20b7,0x20a0-0x20a7,0x20b0-0x20b3,0x2060-0x207f mem 0xd0738000-0xd07387ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_tz5: <Thermal Zone> on acpi0
acpi_tz6: <Thermal Zone> on acpi0
acpi_tz7: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x180 on isa0
sc0: VGA <16 virtual consoles, flags=0x380>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x3a2 offMax=0x5cb
hdacc0: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac0
hdaa0: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc0
pcm0: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12,15 on hdaa0
pcm1: <IDT 92HD91BXX (Analog)> at nid 10 and 17 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm3: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZ7PD256HAFV-000H7 DXM05H6Q> ATA-9 SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1197304882 Hz quality 1000
Enter passphrase for ada0p3: uhub0: 8 ports with 8 removable, self powered
ugen0.2: <SMSC> at usbus0
uhub3: <SMSC USB2134B, class 9/0, rev 2.10/50.00, addr 1> on usbus0
uhub3: MTT enabled
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.3: <Logitech> at usbus0
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen0.4: <vendor 0x04f3> at usbus0
ukbd0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.05, addr 3> on usbus0
kbd2 at ukbd0
uhid0: <vendor 0x04f3 product 0x0103, class 0/0, rev 1.10/1.05, addr 3> on usbus0
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen0.5: <SMSC> at usbus0
uhub6: <SMSC USB5534B, class 9/0, rev 3.00/50.00, addr 4> on usbus0
ugen1.3: <vendor 0x138a> at usbus1
uhub6: 4 ports with 4 removable, self powered
ugen1.4: <Chicony Electronics Co.,Ltd.> at usbus1
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
Trying to mount root from XXXXXXXXX []...
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201403121709.s2CH93XH010367>