Date: Fri, 04 Aug 2000 18:56:14 -0500 From: "Mark A. Hummel" <mhumm@ispchannel.com> To: questions@freebsd.org Subject: I need a FBSD guru Message-ID: <398B581D.33ABA823@ispchannel.com>
next in thread | raw e-mail | index | archive | help
I'd really appreciate it if someone would analyze my dmesg (FreeBSD 4.0
STABLE) and let me know if anything looks odd or what changes I should
make.
I'm preparing to increase the size of my BSD HD partition and since I'm
already wiping BSD, upgrade to 4.1 STABLE. Before I do, I want to make
sure my current kernel (MARK1) is as good as it can be. By doing it
this way, I'm hoping that this newbie (that would be me) will have this
kernel as a template to configure and compile the new one. Here are my
issues:
- I'm curious about the config> di statements and the "No such device"
comments that follow. What exactly are all of those di xxx items being
configured?
- The soundcard was recognized as soon as I added the pcm driver to the
kernel, but GAME, CTRL, and MPU are not. I assume GAME is referring to
the game port and MPU to the midi chip. What is CTRL and how can I
enhance the system to totally recognize my Crystal 128 Tidal Wave sound
card?
- Although my printer is recognized as well as the parallel port, the
printer doesn't print. I've gone through the setup in the book 3
times. What's the trick? My Printcap looks okay and I've added an lpd
directory to /var/spool/output.
That's about it for now. Thanks for the help.
-- Mark
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #5: Fri Jul 21 11:01:20 CDT 2000
root@.gulfbreeze.mediacom.ispchannel.com:/usr/src/sys/compile/MARK1
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6tm w/ multimedia extensions (205.23-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 67108864 (65536K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> en ata0
config> po ata0 0x1f0
config> ir ata0 14
config> f ata0 0
config> q
avail memory = 61628416 (60184K bytes)
Preloaded elf kernel "kernel" at 0xc034d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034d09c.
Preloaded elf module "splash_bmp.ko" at 0xc034d0ec.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc034d190.
VESA: v1.2, 2048k memory, flags:0x0, mode table:0xc00c1c02 (c0001c02)
VESA: S3 Incorporated. 86C325
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0x6800-0x68ff mem
0xe4000000-0xe40000ff irq 10 at device 11.0 on pci0
dc0: Ethernet address: 00:a0:cc:34:d4:32
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: supplying EUI64: 00:a0:cc:ff:fe:34:d4:32
pci0: <S3 ViRGE graphics accelerator> at 15.0 irq 10
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Lexmark Lexmark 5700 > LEXWPS
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcm1: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0
on isa0
unknown0: <GAME> at port 0x200-0x207 on isa0
unknown1: <CTRL> at port 0x120-0x127 on isa0
unknown2: <MPU> at port 0x330-0x331 irq 9 on isa0
ad0: 2014MB <WDC AC22100L> [4092/16/63] at ata0-master using UDMA33
ad1: 3090MB <Maxtor 90320D2> [6279/16/63] at ata0-slave using UDMA33
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-master using PIO0
acd0: CDROM <SONY CD-ROM CDU4821> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad1s1a
dc0: starting DAD for fe80:0001::02a0:ccff:fe34:d432
dc0: DAD complete for fe80:0001::02a0:ccff:fe34:d432 - no duplicates
found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?398B581D.33ABA823>