Date: Thu, 11 May 2006 12:13:06 +0300 From: Igor Gorobets <igoryan@wheel.kiev.ua> To: freebsd-acpi@FreeBSD.org Subject: [bugs ACPI] Toshiba Satellite L20-181 Series PSL2XE Message-ID: <20060511091306.GA60440@wheel.kiev.ua>
next in thread | raw e-mail | index | archive | help
--VS++wcV0S1rZb1Fb Content-Type: text/plain; charset=koi8-r Content-Disposition: inline Hello. At me a problem with installation FreeBSD 6.0 RELEASE on laptope which it is specified in a theme. I send you dmeag loadings after installation, and it is obviously visible that a problem in ACPI. Prompt as it to overcome. To me it is very important. Thanks in advance for the help. --VS++wcV0S1rZb1Fb Content-Type: text/plain; charset=koi8-r Content-Disposition: attachment; filename=toshiba Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) M processor 1.60GHz (1596.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> real memory = 199884800 (190 MB) avail memory = 186073088 (177 MB) MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 2.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0 acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xd0000000-0xd0000fff irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xd0001000-0xd0001fff irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0002000-0xd0002fff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1002) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci9: <ACPI PCI bus> on pcib2 cbb0: <TI1510 PCI-CardBus Bridge> at device 1.0 on pci9 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0200000-0xd02000ff irq 21 at device 2.0 on pci9 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:c0:9f:ee:ce:c3 pci0: <multimedia, audio> at device 20.5 (no driver attached) pci0: <simple comms, generic modem> at device 20.6 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xe0000-0xe3fff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1596008629 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38154MB <TOSHIBA MK4026GAX PA100U> at ata0-master UDMA100 acd0: CDRW <TSSTcorpCDW/DVD TS-L462C/TO10> at ata1-master UDMA33 Trying to mount root from ufs:/dev/ad0s1a ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc140c0a0 StartNode 0xc140c0a0 ReturnNode 0 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc140bdc0), AE_NOT_FOUND rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout rl0: watchdog timeout --VS++wcV0S1rZb1Fb--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060511091306.GA60440>