Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 11 Apr 2004 17:04:15 -0700
From:      "Eric Sabban" <esabban@hotmail.com>
To:        current@freebsd.org
Subject:   Current can't boot on my ICH5 with ATA
Message-ID:  <BAY2-F106kIqA1dlqlR00007a7a@hotmail.com>

next in thread | raw e-mail | index | archive | help
As of Sun Apr 11 15:45:45 PDT 2004 I'm unable to boot current. The kernel 
doesn't appear to be able to probe my ata drives anymore hanging off the ATA 
controller (the drive is PATA, not SATA).

I'm unable to boot the kernel that was previously on the machine for one 
reason or another, and I'm pretty much out of ideas.

Things to note:
1) I don't see any drives probed at all
2) An earlier stage of the loader has no problem booting, so the hardware 
should be good
3) List of GEOM managed disk devices is empty, probably due to 1

If you do reply to this, I'm at limited capacity with this box down at home 
(blech, using my hotmail account), so could you please CC me.

At some point in the future I'll have downloaded an FBSD CD so I can get the 
kernel config off of the dead box, but right now I'm not able to get much 
out of it.

Also, if anybody has an idea why I can't boot /boot/kernel.old/kernel at all 
(it locks up in the reading process |/-\| ) I'd appreciate some insight.

Thanks,
Eric

Following is the kernel config:

/boot/kernel/acpi.ko text=0x38844 data=0x19c4+0x118c 
syms=[0x4+0x66a0+0x4+0x88d9]
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000003fe74000
SMAP type=04 base=000000003ff74000 len=0000000000002000
SMAP type=03 base=000000003ff76000 len=0000000000021000
SMAP type=02 base=000000003ff97000 len=0000000000069000
SMAP type=02 base=00000000fed20000 len=0000000000070000
SMAP type=02 base=00000000fecf0000 len=0000000000001000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000010000
SMAP type=02 base=00000000ffb00000 len=0000000000500000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #2: Sun Apr 11 15:45:45 PDT 2004
    root@goliath.lame.net:/usr/obj/usr/src/sys/GOLIATH
Preloaded elf kernel "/boot/kernel/kernel" at 0xc082d000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc082d294.
Calibrating clock(s) ... i8254 clock: 1193131 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2394008344 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073168384 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000003ed45fff, 1041354752 bytes (254237 pages)
avail memory = 1040777216 (992 MB)
Table 'FACP' at 0xfd184
Table 'SSDT' at 0xfffc8667
Table 'APIC' at 0xfd1f8
MADT: Found table at 0xfd1f8
MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: disabled
MADT: Found CPU APIC ID 3 ACPI ID 4: disabled
ACPI APIC Table: <DELL   PE400SC>
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xba6a
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 16 -> irq 16 (level, activelo)
ioapic0: intpin 17 -> irq 17 (level, activelo)
ioapic0: intpin 18 -> irq 18 (level, activelo)
ioapic0: intpin 19 -> irq 19 (level, activelo)
ioapic0: intpin 20 -> irq 20 (level, activelo)
ioapic0: intpin 21 -> irq 21 (level, activelo)
ioapic0: intpin 22 -> irq 22 (level, activelo)
ioapic0: intpin 23 -> irq 23 (level, activelo)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 polarity: active-hi
ioapic0: intpin 2 trigger: edge
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 polarity: active-hi
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
cpu0 on motherboard
cpu1 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE400SC> on motherboard
acpi0: [GIANT-LOCKED]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=25788086)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00feae0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 14 15
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 14 15
embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 14 15
embedded    2   12    A   0x62  3 4 5 6 7 9 10 11 14 15
slot 1      2    0    A   0x69  3 4 5 6 7 9 10 11 14 15
slot 1      2    0    B   0x6a  3 4 5 6 7 9 10 11 14 15
slot 1      2    0    C   0x6b  3 4 5 6 7 9 10 11 14 15
slot 1      2    0    D   0x68  3 4 5 6 7 9 10 11 14 15
slot 2      2    1    A   0x6a  3 4 5 6 7 9 10 11 14 15
slot 2      2    1    B   0x69  3 4 5 6 7 9 10 11 14 15
slot 2      2    1    C   0x68  3 4 5 6 7 9 10 11 14 15
slot 2      2    1    D   0x6b  3 4 5 6 7 9 10 11 14 15
slot 3      2    2    A   0x61  3 4 5 6 7 9 10 11 14 15
slot 3      2    2    B   0x62  3 4 5 6 7 9 10 11 14 15
slot 3      2    2    C   0x63  3 4 5 6 7 9 10 11 14 15
slot 3      2    2    D   0x60  3 4 5 6 7 9 10 11 14 15
slot 4      2    3    A   0x63  3 4 5 6 7 9 10 11 14 15
slot 4      2    3    B   0x62  3 4 5 6 7 9 10 11 14 15
slot 4      2    3    C   0x69  3 4 5 6 7 9 10 11 14 15
slot 4      2    3    D   0x6a  3 4 5 6 7 9 10 11 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 3, range 32, base f0000000, size 27, enabled
found-> vendor=0x8086, dev=0x2578, revid=0x02
        bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2579, revid=0x02
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type 4, range 32, base 0000ff80, size  5, enabled
pcib0: matched entry for 0.29.INTA (src )
pcib0: device is hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
        bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=16
        map[20]: type 4, range 32, base 0000ff60, size  5, enabled
pcib0: matched entry for 0.29.INTB (src )
pcib0: device is hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d4, revid=0x02
        bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=19
        map[20]: type 4, range 32, base 0000ff40, size  5, enabled
pcib0: matched entry for 0.29.INTC (src )
pcib0: device is hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d7, revid=0x02
        bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=18
        map[20]: type 4, range 32, base 0000ff20, size  5, enabled
pcib0: matched entry for 0.29.INTA (src )
pcib0: device is hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24de, revid=0x02
        bus=0, slot=29, func=3
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=16
        map[10]: type 1, range 32, base ffa80800, size 10, enabled
pcib0: matched entry for 0.29.INTD (src )
pcib0: device is hardwired to IRQ 23
found-> vendor=0x8086, dev=0x24dd, revid=0x02
        bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=23
        powerspec 2  supports D0 D3  current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
        bus=0, slot=30, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
        bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type 4, range 32, base 000001f0, size  3, enabled
        map[14]: type 4, range 32, base 000003f4, size  2, enabled
        map[18]: type 4, range 32, base 00000170, size  3, enabled
        map[1c]: type 4, range 32, base 00000374, size  2, enabled
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
        map[24]: type 1, range 32, base febffc00, size 10, enabled
pcib0: matched entry for 0.31.INTA (src )
pcib0: device is hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24db, revid=0x02
        bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=18
        map[10]: type 4, range 32, base 0000fe00, size  3, enabled
        map[14]: type 4, range 32, base 0000fe10, size  2, enabled
        map[18]: type 4, range 32, base 0000fe20, size  3, enabled
        map[1c]: type 4, range 32, base 0000fe30, size  2, enabled
        map[20]: type 4, range 32, base 0000fea0, size  4, enabled
pcib0: matched entry for 0.31.INTA (src )
pcib0: device is hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d1, revid=0x02
        bus=0, slot=31, func=2
        class=01-01-8f, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=18
        map[20]: type 4, range 32, base 0000efe0, size  5, enabled
pcib0: matched entry for 0.31.INTB (src )
pcib0: device is hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d3, revid=0x02
        bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=17
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 
0.0 on pci0
agp0: Bus reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 
at device 29.0 on pci0
uhci0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 
at device 29.1 on pci0
uhci1: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff60
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: APC Back-UPS ES 725 FW:802.n2.D USB FW:n2, rev 1.10/1.06, addr 2
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 
at device 29.2 on pci0
uhci2: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff40
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 
at device 29.3 on pci0
uhci3: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xff20
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xfd000000-0xfeafffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2:   Subtractively decoded bridge.
---- initial configuration ------------------------
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
        map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib2: device (null) requested decoded memory range 0xfd000000-0xfdffffff
        map[14]: type 4, range 32, base 0000dc00, size  8, enabled
pcib2: device (null) requested decoded I/O range 0xdc00-0xdcff
        map[18]: type 1, range 32, base fe9de000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xfe9de000-0xfe9defff
pcib2: matched entry for 2.0.INTA (src )
pcib2: device is hardwired to IRQ 21
found-> vendor=0x1002, dev=0x4752, revid=0x27
        bus=2, slot=0, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=21
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 4, range 32, base 0000dd00, size  8, enabled
pcib2: device (null) requested decoded I/O range 0xdd00-0xddff
        map[14]: type 1, range 64, base fe9df000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xfe9df000-0xfe9dffff
pcib2: matched entry for 2.1.INTA (src )
pcib2: device is hardwired to IRQ 22
found-> vendor=0x9005, dev=0x0010, revid=0x00
        bus=2, slot=1, func=0
        class=01-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 
ns)
        intpin=a, irq=22
        powerspec 1  supports D0 D3  current D0
        map[10]: type 4, range 32, base 0000db30, size  4, enabled
pcib2: device (null) requested decoded I/O range 0xdb30-0xdb3f
        map[18]: type 1, range 32, base fe000000, size 23, enabled
pcib2: device (null) requested decoded memory range 0xfe000000-0xfe7fffff
pcib2: matched entry for 2.2.INTA (src )
pcib2: device is hardwired to IRQ 17
found-> vendor=0x13c1, dev=0x1001, revid=0x01
        bus=2, slot=2, func=0
        class=01-04-00, hdrtype=0x00, mfdev=0
        cmdreg=0x011f, statreg=0x0290, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x09 (2250 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=17
        powerspec 1  supports D0 D1 D3  current D0
        map[10]: type 4, range 32, base 0000de00, size  8, enabled
pcib2: device (null) requested decoded I/O range 0xde00-0xdeff
        map[14]: type 1, range 32, base fe9ddf00, size  8, enabled
pcib2: device (null) requested decoded memory range 0xfe9ddf00-0xfe9ddfff
pcib2: matched entry for 2.3.INTA (src )
pcib2: device is hardwired to IRQ 19
found-> vendor=0x11ad, dev=0x0002, revid=0x21
        bus=2, slot=3, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=19
        map[10]: type 1, range 32, base fe9e0000, size 17, enabled
pcib2: device (null) requested decoded memory range 0xfe9e0000-0xfe9fffff
        map[18]: type 4, range 32, base 0000db40, size  6, enabled
pcib2: device (null) requested decoded I/O range 0xdb40-0xdb7f
pcib2: matched entry for 2.12.INTA (src )
pcib2: device is hardwired to IRQ 18
found-> vendor=0x8086, dev=0x100e, revid=0x02
        bus=2, slot=12, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=18
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
pci2: <display, VGA> at device 0.0 (no driver attached)
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xdd00-0xddff mem 
0xfe9df000-0xfe9dffff irq 22 at device 1.0 on pci2
ahc0: Defaulting to MEMIO off
ahc0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xdd00
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 424 instructions downloaded
ahc0: Features 0x56f6, Bugs 0x6, Flags 0x28485540
ahc0: [GIANT-LOCKED]
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
twe0: <3ware 7000 series Storage Controller. Driver version 1.50.01.000> 
port 0xdb30-0xdb3f mem 0xfe000000-0xfe7fffff irq 17 at device 2.0 on pci2
twe0: Bus reserved 0x10 bytes for rid 0x10 type 4 at 0xdb30
twe0: [GIANT-LOCKED]
twe0: AEN: <soft reset>
twe0: 8 ports, Firmware FE7X 1.05.00.056, BIOS BE7X 1.08.00.046
twe0: Monitor ME7X 1.01.00.038, PCB Rev3    , Achip 3.20    , Pchip 1.30-33
dc0: <82c169 PNIC 10/100BaseTX> port 0xde00-0xdeff mem 0xfe9ddf00-0xfe9ddfff 
irq 19 at device 3.0 on pci2
dc0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0xde00
miibus0: <MII bus> on dc0
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0:  100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:a0:cc:3e:e1:06
dc0: [GIANT-LOCKED]
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 
0xdb40-0xdb7f mem 0xfe9e0000-0xfe9fffff irq 18 at device 12.0 on pci2
em0: Bus reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000
em0: Bus reserved 0x40 bytes for rid 0x18 type 4 at 0xdb40
em0: [GIANT-LOCKED]
em0: bpf attached
em0: Ethernet address: 00:07:e9:26:2b:fc
em0:  Speed:N/A  Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
0xfebffc00-0xfebfffff irq 18 at device 31.1 on pci0
atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
atapci1: <Intel ICH5 SATA150 controller> port 
0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 
at device 31.2 on pci0
atapci1: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xfea0
atapci1: [MPSAFE]
atapci1: Bus reserved 0x8 bytes for rid 0x10 type 4 at 0xfe00
atapci1: Bus reserved 0x4 bytes for rid 0x14 type 4 at 0xfe10
ata2: at 0xfe00 on atapci1
ata2: [MPSAFE]
atapci1: Bus reserved 0x8 bytes for rid 0x18 type 4 at 0xfe20
atapci1: Bus reserved 0x4 bytes for rid 0x1c type 4 at 0xfe30
ata3: at 0xfe20 on atapci1
ata3: [MPSAFE]
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0xefe0-0xefff irq 17 
at device 31.3 on pci0
ichsmb0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0xefe0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
fdc0: cannot reserve I/O port range (1 ports)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cannot reserve I/O port range (1 ports)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 
0xca000-0xcbfff,0xc8800-0xc9fff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: cannot reserve I/O port range (6 ports)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 04 b0 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2394008344 Hz quality -100
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to 
accept, logging disabled
BRIDGE 031224 loaded
DUMMYNET initialized (011031)
IPsec: Initialized Security Association Processing.
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(ahc0:A:4:0): Sending WDTR 1
(ahc0:A:4:0): Received WDTR 1 filtered to 1
ahc0: target 4 using 16bit transfers
(ahc0:A:4:0): Sending SDTR period a, offset 7f
(ahc0:A:4:0): Received SDTR period c, offset 7
        Filtered to period c, offset 7
ahc0: target 4 synchronous at 20.0MHz, offset = 0x7
(ahc0:A:4:0): Sending WDTR 1
(ahc0:A:4:0): Received WDTR 1 filtered to 1
ahc0: target 4 using 16bit transfers
(ahc0:A:4:0): Sending SDTR period c, offset 7
(ahc0:A:4:0): Received SDTR period c, offset 7
        Filtered to period c, offset 7
ahc0: target 4 synchronous at 20.0MHz, offset = 0x7
pass0 at ahc0 bus 0 target 4 lun 0
pass0: <OnStream ADR Series 6.05> Removable Sequential Access SCSI-2 device
pass0: Serial Number 6635324450
pass0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit)
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <OnStream ADR Series 6.05> Removable Sequential Access SCSI-2 device
sa0: Serial Number 6635324450
sa0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit)
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (IRQ 1) to cluster 0
ioapic0: routing intpin 3 (IRQ 3) to cluster 0
ioapic0: routing intpin 4 (IRQ 4) to cluster 0
ioapic0: routing intpin 7 (IRQ 7) to cluster 0
ioapic0: routing intpin 8 (IRQ 8) to cluster 0
ioapic0: routing intpin 9 (IRQ 9) to cluster 0
ioapic0: routing intpin 13 (IRQ 13) to cluster 0
ioapic0: routing intpin 16 (IRQ 16) to cluster 0
ioapic0: routing intpin 17 (IRQ 17) to cluster 0
ioapic0: routing intpin 18 (IRQ 18) to cluster 0
ioapic0: routing intpin 19 (IRQ 19) to cluster 0
ioapic0: routing intpin 22 (IRQ 22) to cluster 0
Mounting root from ufs:/dev/ad0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> ?

List of GEOM managed disk devices:


Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot>
panic: Root mount failed, startup aborted.
at line 1292 in file /usr/src/sys/kern/vfs_mount.c
cpuid = 1;
Debugger("panic")
Stopped at      Debugger+0x46:  xchgl   %ebx,in_Debugger.0
db>

_________________________________________________________________
Check out MSN PC Safety & Security to help ensure your PC is protected and 
safe. http://specials.msn.com/msn/security.asp



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY2-F106kIqA1dlqlR00007a7a>