Skip site navigation (1)Skip section navigation (2)
Date:      30 Aug 2002 19:39:28 -0500
From:      Larry Rosenman <ler@lerctr.org>
To:        Mahlon <mahlon-dated-1032045359.89a18a@martini.nu>
Cc:        ports@FreeBSD.ORG, nsayer@FreeBSD.ORG
Subject:   Re: Failed port: libmcrypt
Message-ID:  <1030754373.455.2.camel@lerlaptop.lerctr.org>
In-Reply-To: <20020830231558.GA28359@martini.nu>
References:  <20020830231558.GA28359@martini.nu>

next in thread | previous in thread | raw e-mail | index | archive | help
remove the autoconf-2.13 port, and re-do it.

I have a PR open about it (ports/39780).



On Fri, 2002-08-30 at 18:15, Mahlon wrote:
> 
> Ports supped 2 hours ago.
> 
> 
> <snip>
> creating libtool
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating libmcrypt.spec
> config.status: creating lib/Makefile
> config.status: creating doc/Makefile
> config.status: creating src/Makefile
> config.status: creating modules/Makefile
> config.status: creating modules/modes/Makefile
> config.status: creating modules/algorithms/Makefile
> config.status: creating lib/mcrypt.h
> config.status: creating lib/libmcrypt-config
> config.status: creating config.h
> config.status: config.h is unchanged
> config.status: executing depfiles commands
> config.status: executing default-1 commands
> configure: configuring in libltdl
> configure: running /usr/local/bin/bash './configure' --prefix=/usr/local  '--prefix=/usr/local' '--build=i386-portbld-freebsd4.6' 'CC=cc' 'CFLAGS=-O -pipe ' 'CPPFLAGS=-I/usr/local/include' 'build_alias=i386-portbld-freebsd4.6' --enable-ltdl-install=no --cache-file=/dev/null --srcdir=.
> configure: warning: CC=cc: invalid host type
> configure: warning: CFLAGS=-O -pipe : invalid host type
> configure: error: can only configure for one host and one target at a time
> configure: error: /usr/local/bin/bash './configure' failed for libltdl
> ===>  Script "configure" failed unexpectedly.
>       Please report the problem to ports@FreeBSD.org [maintainer] and attach
>       the "/usr/ports/security/libmcrypt/work/libmcrypt-2.5.2/config.log"
>       including the output of the failure of your make command. Also, it might
>       be a good idea to provide an overview of all packages installed on your
>       system (e.g. an `ls /var/db/pkg`).
> *** Error code 1
> 
> Stop in /usr/ports/security/libmcrypt.
> 
> 
> 
> -------
> 
> 
> 
> This file contains any messages produced by compilers while
> running configure, to aid debugging if configure makes a mistake.
> 
> It was created by configure, which was
> generated by GNU Autoconf 2.53.  Invocation command line was
> 
>   $ ./configure --prefix=/usr/local --build=i386-portbld-freebsd4.6
> 
> ## --------- ##
> ## Platform. ##
> ## --------- ##
> 
> hostname = happymaggot.stinkymeat.net
> uname -m = i386
> uname -r = 4.6-RELEASE
> uname -s = FreeBSD
> uname -v = FreeBSD 4.6-RELEASE #5: Tue Jun 18 17:37:48 PDT 2002     root@happymaggot.stinkymeat.net:/usr/src/sys/compile/HAPPYMAGGOT 
> 
> /usr/bin/uname -p = i386
> /bin/uname -X     = unknown
> 
> /bin/arch              = unknown
> /usr/bin/arch -k       = unknown
> /usr/convex/getsysinfo = unknown
> hostinfo               = unknown
> /bin/machine           = unknown
> /usr/bin/oslevel       = unknown
> /bin/universe          = unknown
> 
> PATH: /bin
> PATH: /sbin
> PATH: /usr/bin
> PATH: /usr/sbin
> PATH: /usr/games
> PATH: /usr/local/bin
> PATH: /usr/local/sbin
> PATH: /usr/X11R6/bin
> PATH: /bin
> PATH: /sbin
> PATH: /usr/bin
> PATH: /usr/sbin
> PATH: /usr/games
> PATH: /usr/local/bin
> PATH: /usr/local/sbin
> PATH: /usr/X11R6/bin
> PATH: /sbin
> PATH: /bin
> PATH: /usr/sbin
> PATH: /usr/bin
> 
> 
> ## ----------- ##
> ## Core tests. ##
> ## ----------- ##
> 
> configure:1410: checking build system type
> configure:1428: result: i386-portbld-freebsd4.6
> configure:1436: checking host system type
> configure:1450: result: i386-portbld-freebsd4.6
> configure:1458: checking target system type
> configure:1472: result: i386-portbld-freebsd4.6
> configure:1499: checking for a BSD-compatible install
> configure:1553: result: /usr/bin/install -c -o root -g wheel
> configure:1564: checking whether build environment is sane
> configure:1607: result: yes
> configure:1640: checking for gawk
> configure:1669: result: no
> configure:1640: checking for mawk
> configure:1669: result: no
> configure:1640: checking for nawk
> configure:1669: result: no
> configure:1640: checking for awk
> configure:1656: found /usr/bin/awk
> configure:1666: result: awk
> configure:1676: checking whether make sets ${MAKE}
> configure:1696: result: yes
> configure:1849: checking whether make sets ${MAKE}
> configure:1869: result: yes
> configure:1925: checking for gcc
> configure:1951: result: cc
> configure:2195: checking for C compiler version
> configure:2198: cc --version </dev/null >&5
> 2.95.3
> configure:2201: $? = 0
> configure:2203: cc -v </dev/null >&5
> Using builtin specs.
> gcc version 2.95.3 20010315 (release) [FreeBSD]
> configure:2206: $? = 0
> configure:2208: cc -V </dev/null >&5
> cc: argument to `-V' is missing
> configure:2211: $? = 1
> configure:2237: checking for C compiler default output
> configure:2240: cc -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:2243: $? = 0
> configure:2276: result: a.out
> configure:2281: checking whether the C compiler works
> configure:2287: ./a.out
> configure:2290: $? = 0
> configure:2305: result: yes
> configure:2312: checking whether we are cross compiling
> configure:2314: result: no
> configure:2317: checking for suffix of executables
> configure:2319: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:2322: $? = 0
> configure:2344: result: 
> configure:2350: checking for suffix of object files
> configure:2374: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:2377: $? = 0
> configure:2396: result: o
> configure:2400: checking whether we are using the GNU C compiler
> configure:2427: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:2430: $? = 0
> configure:2433: test -s conftest.o
> configure:2436: $? = 0
> configure:2448: result: yes
> configure:2454: checking whether cc accepts -g
> configure:2478: cc -c -g -I/usr/local/include conftest.c >&5
> configure:2481: $? = 0
> configure:2484: test -s conftest.o
> configure:2487: $? = 0
> configure:2497: result: yes
> configure:2524: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> conftest.c:2: syntax error before `me'
> configure:2527: $? = 1
> configure: failed program was:
> #ifndef __cplusplus
>   choke me
> #endif
> configure:2656: checking for style of include used by make
> configure:2684: result: GNU
> configure:2712: checking dependency style of cc
> configure:2774: result: gcc
> configure:2797: checking for a BSD-compatible install
> configure:2851: result: /usr/bin/install -c -o root -g wheel
> configure:2862: checking whether ln -s works
> configure:2866: result: yes
> configure:2876: checking whether in maintanance mode
> configure:2883: result: no
> configure:2887: checking whether in dmalloc mode
> configure:2894: result: no
> configure:2972: checking whether to disable dynamic module loading
> configure:2979: result: no
> configure:2983: checking whether to include algorithms into library
> configure:2999: result: 
> configure:3035: checking how to run the C preprocessor
> configure:3061: cc -E -I/usr/local/include conftest.c
> configure:3067: $? = 0
> configure:3094: cc -E -I/usr/local/include conftest.c
> configure:3090: ac_nonexistent.h: No such file or directory
> configure:3100: $? = 1
> configure: failed program was:
> #line 3089 "configure"
> #include "confdefs.h"
> #include <ac_nonexistent.h>
> configure:3137: result: cc -E
> configure:3152: cc -E -I/usr/local/include conftest.c
> configure:3158: $? = 0
> configure:3185: cc -E -I/usr/local/include conftest.c
> configure:3181: ac_nonexistent.h: No such file or directory
> configure:3191: $? = 1
> configure: failed program was:
> #line 3180 "configure"
> #include "confdefs.h"
> #include <ac_nonexistent.h>
> configure:3231: checking for ANSI C header files
> configure:3245: cc -E -I/usr/local/include conftest.c
> configure:3251: $? = 0
> configure:3336: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:3339: $? = 0
> configure:3341: ./conftest
> configure:3344: $? = 0
> configure:3358: result: yes
> configure:3368: checking for cc option to accept ANSI C
> configure:3431: cc  -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3434: $? = 0
> configure:3437: test -s conftest.o
> configure:3440: $? = 0
> configure:3457: result: none needed
> configure:3465: checking for inline
> configure:3482: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3485: $? = 0
> configure:3488: test -s conftest.o
> configure:3491: $? = 0
> configure:3502: result: inline
> configure:3532: checking for sys/types.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3532: checking for sys/stat.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3532: checking for stdlib.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3532: checking for string.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3532: checking for memory.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3532: checking for strings.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3532: checking for inttypes.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3532: checking for stdint.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3573: stdint.h: No such file or directory
> configure:3548: $? = 1
> configure: failed program was:
> #line 3537 "configure"
> #include "confdefs.h"
> #include <stdio.h>
> #if HAVE_SYS_TYPES_H
> # include <sys/types.h>
> #endif
> #if HAVE_SYS_STAT_H
> # include <sys/stat.h>
> #endif
> #if STDC_HEADERS
> # include <stdlib.h>
> # include <stddef.h>
> #else
> # if HAVE_STDLIB_H
> #  include <stdlib.h>
> # endif
> #endif
> #if HAVE_STRING_H
> # if !STDC_HEADERS && HAVE_MEMORY_H
> #  include <memory.h>
> # endif
> # include <string.h>
> #endif
> #if HAVE_STRINGS_H
> # include <strings.h>
> #endif
> #if HAVE_INTTYPES_H
> # include <inttypes.h>
> #else
> # if HAVE_STDINT_H
> #  include <stdint.h>
> # endif
> #endif
> #if HAVE_UNISTD_H
> # include <unistd.h>
> #endif
> 
> #include <stdint.h>
> configure:3564: result: no
> configure:3532: checking for unistd.h
> configure:3545: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3548: $? = 0
> configure:3551: test -s conftest.o
> configure:3554: $? = 0
> configure:3564: result: yes
> configure:3584: checking for unistd.h
> configure:3589: result: yes
> configure:3584: checking for strings.h
> configure:3589: result: yes
> configure:3593: checking dlfcn.h usability
> configure:3602: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3605: $? = 0
> configure:3608: test -s conftest.o
> configure:3611: $? = 0
> configure:3620: result: yes
> configure:3624: checking dlfcn.h presence
> configure:3631: cc -E -I/usr/local/include conftest.c
> configure:3637: $? = 0
> configure:3655: result: yes
> configure:3673: checking for dlfcn.h
> configure:3680: result: yes
> configure:3593: checking sys/endian.h usability
> configure:3602: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3630: sys/endian.h: No such file or directory
> configure:3605: $? = 1
> configure: failed program was:
> #line 3595 "configure"
> #include "confdefs.h"
> #include <stdio.h>
> #if HAVE_SYS_TYPES_H
> # include <sys/types.h>
> #endif
> #if HAVE_SYS_STAT_H
> # include <sys/stat.h>
> #endif
> #if STDC_HEADERS
> # include <stdlib.h>
> # include <stddef.h>
> #else
> # if HAVE_STDLIB_H
> #  include <stdlib.h>
> # endif
> #endif
> #if HAVE_STRING_H
> # if !STDC_HEADERS && HAVE_MEMORY_H
> #  include <memory.h>
> # endif
> # include <string.h>
> #endif
> #if HAVE_STRINGS_H
> # include <strings.h>
> #endif
> #if HAVE_INTTYPES_H
> # include <inttypes.h>
> #else
> # if HAVE_STDINT_H
> #  include <stdint.h>
> # endif
> #endif
> #if HAVE_UNISTD_H
> # include <unistd.h>
> #endif
> #include <sys/endian.h>
> configure:3620: result: no
> configure:3624: checking sys/endian.h presence
> configure:3631: cc -E -I/usr/local/include conftest.c
> configure:3627: sys/endian.h: No such file or directory
> configure:3637: $? = 1
> configure: failed program was:
> #line 3626 "configure"
> #include "confdefs.h"
> #include <sys/endian.h>
> configure:3655: result: no
> configure:3673: checking for sys/endian.h
> configure:3680: result: no
> configure:3702: checking for sys/types.h
> configure:3707: result: yes
> configure:3711: checking sys/mman.h usability
> configure:3720: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3723: $? = 0
> configure:3726: test -s conftest.o
> configure:3729: $? = 0
> configure:3738: result: yes
> configure:3742: checking sys/mman.h presence
> configure:3749: cc -E -I/usr/local/include conftest.c
> configure:3755: $? = 0
> configure:3773: result: yes
> configure:3791: checking for sys/mman.h
> configure:3798: result: yes
> configure:3711: checking dirent.h usability
> configure:3720: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3723: $? = 0
> configure:3726: test -s conftest.o
> configure:3729: $? = 0
> configure:3738: result: yes
> configure:3742: checking dirent.h presence
> configure:3749: cc -E -I/usr/local/include conftest.c
> configure:3755: $? = 0
> configure:3773: result: yes
> configure:3791: checking for dirent.h
> configure:3798: result: yes
> configure:3711: checking byteswap.h usability
> configure:3720: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3748: byteswap.h: No such file or directory
> configure:3723: $? = 1
> configure: failed program was:
> #line 3713 "configure"
> #include "confdefs.h"
> #include <stdio.h>
> #if HAVE_SYS_TYPES_H
> # include <sys/types.h>
> #endif
> #if HAVE_SYS_STAT_H
> # include <sys/stat.h>
> #endif
> #if STDC_HEADERS
> # include <stdlib.h>
> # include <stddef.h>
> #else
> # if HAVE_STDLIB_H
> #  include <stdlib.h>
> # endif
> #endif
> #if HAVE_STRING_H
> # if !STDC_HEADERS && HAVE_MEMORY_H
> #  include <memory.h>
> # endif
> # include <string.h>
> #endif
> #if HAVE_STRINGS_H
> # include <strings.h>
> #endif
> #if HAVE_INTTYPES_H
> # include <inttypes.h>
> #else
> # if HAVE_STDINT_H
> #  include <stdint.h>
> # endif
> #endif
> #if HAVE_UNISTD_H
> # include <unistd.h>
> #endif
> #include <byteswap.h>
> configure:3738: result: no
> configure:3742: checking byteswap.h presence
> configure:3749: cc -E -I/usr/local/include conftest.c
> configure:3745: byteswap.h: No such file or directory
> configure:3755: $? = 1
> configure: failed program was:
> #line 3744 "configure"
> #include "confdefs.h"
> #include <byteswap.h>
> configure:3773: result: no
> configure:3791: checking for byteswap.h
> configure:3798: result: no
> configure:3711: checking endian.h usability
> configure:3720: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3748: endian.h: No such file or directory
> configure:3723: $? = 1
> configure: failed program was:
> #line 3713 "configure"
> #include "confdefs.h"
> #include <stdio.h>
> #if HAVE_SYS_TYPES_H
> # include <sys/types.h>
> #endif
> #if HAVE_SYS_STAT_H
> # include <sys/stat.h>
> #endif
> #if STDC_HEADERS
> # include <stdlib.h>
> # include <stddef.h>
> #else
> # if HAVE_STDLIB_H
> #  include <stdlib.h>
> # endif
> #endif
> #if HAVE_STRING_H
> # if !STDC_HEADERS && HAVE_MEMORY_H
> #  include <memory.h>
> # endif
> # include <string.h>
> #endif
> #if HAVE_STRINGS_H
> # include <strings.h>
> #endif
> #if HAVE_INTTYPES_H
> # include <inttypes.h>
> #else
> # if HAVE_STDINT_H
> #  include <stdint.h>
> # endif
> #endif
> #if HAVE_UNISTD_H
> # include <unistd.h>
> #endif
> #include <endian.h>
> configure:3738: result: no
> configure:3742: checking endian.h presence
> configure:3749: cc -E -I/usr/local/include conftest.c
> configure:3745: endian.h: No such file or directory
> configure:3755: $? = 1
> configure: failed program was:
> #line 3744 "configure"
> #include "confdefs.h"
> #include <endian.h>
> configure:3773: result: no
> configure:3791: checking for endian.h
> configure:3798: result: no
> configure:3825: checking limits.h usability
> configure:3834: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:3837: $? = 0
> configure:3840: test -s conftest.o
> configure:3843: $? = 0
> configure:3852: result: yes
> configure:3856: checking limits.h presence
> configure:3863: cc -E -I/usr/local/include conftest.c
> configure:3869: $? = 0
> configure:3887: result: yes
> configure:3905: checking for limits.h
> configure:3912: result: yes
> configure:3933: checking for bzero
> configure:3976: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:3979: $? = 0
> configure:3982: test -s conftest
> configure:3985: $? = 0
> configure:3995: result: yes
> configure:3933: checking for memset
> configure:3976: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:3948: warning: conflicting types for built-in function `memset'
> configure:3979: $? = 0
> configure:3982: test -s conftest
> configure:3985: $? = 0
> configure:3995: result: yes
> configure:3933: checking for mlock
> configure:3976: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:3979: $? = 0
> configure:3982: test -s conftest
> configure:3985: $? = 0
> configure:3995: result: yes
> configure:3933: checking for readdir_r
> configure:3976: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:3979: $? = 0
> configure:3982: test -s conftest
> configure:3985: $? = 0
> configure:3995: result: yes
> configure:3933: checking for readdir
> configure:3976: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:3979: $? = 0
> configure:3982: test -s conftest
> configure:3985: $? = 0
> configure:3995: result: yes
> configure:4010: checking for memmove
> configure:4053: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:4056: $? = 0
> configure:4059: test -s conftest
> configure:4062: $? = 0
> configure:4072: result: yes
> configure:4010: checking for bcopy
> configure:4053: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:4056: $? = 0
> configure:4059: test -s conftest
> configure:4062: $? = 0
> configure:4072: result: yes
> configure:4083: checking whether byte ordering is bigendian
> configure:4113: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:4116: $? = 0
> configure:4119: test -s conftest.o
> configure:4122: $? = 0
> configure:4149: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure: In function `main':
> configure:4139: syntax error before `big'
> configure:4152: $? = 1
> configure: failed program was:
> #line 4125 "configure"
> #include "confdefs.h"
> #include <sys/types.h>
> #include <sys/param.h>
> 
> #ifdef F77_DUMMY_MAIN
> #  ifdef __cplusplus
>      extern "C"
> #  endif
>    int F77_DUMMY_MAIN() { return 1; }
> #endif
> int
> main ()
> {
> #if BYTE_ORDER != BIG_ENDIAN
>  not big endian
> #endif
> 
>   ;
>   return 0;
> }
> configure:4266: result: no
> configure:4285: checking for unsigned long int
> configure:4312: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:4315: $? = 0
> configure:4318: test -s conftest.o
> configure:4321: $? = 0
> configure:4331: result: yes
> configure:4334: checking size of unsigned long int
> configure:4612: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:4615: $? = 0
> configure:4617: ./conftest
> configure:4620: $? = 0
> configure:4640: result: 4
> configure:4647: checking for unsigned int
> configure:4674: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:4677: $? = 0
> configure:4680: test -s conftest.o
> configure:4683: $? = 0
> configure:4693: result: yes
> configure:4696: checking size of unsigned int
> configure:4974: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:4977: $? = 0
> configure:4979: ./conftest
> configure:4982: $? = 0
> configure:5002: result: 4
> configure:5009: checking for unsigned short int
> configure:5036: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:5039: $? = 0
> configure:5042: test -s conftest.o
> configure:5045: $? = 0
> configure:5055: result: yes
> configure:5058: checking size of unsigned short int
> configure:5336: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:5339: $? = 0
> configure:5341: ./conftest
> configure:5344: $? = 0
> configure:5364: result: 2
> configure:5371: checking for unsigned char
> configure:5398: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:5401: $? = 0
> configure:5404: test -s conftest.o
> configure:5407: $? = 0
> configure:5417: result: yes
> configure:5420: checking size of unsigned char
> configure:5698: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -L/usr/local/lib >&5
> configure:5701: $? = 0
> configure:5703: ./conftest
> configure:5706: $? = 0
> configure:5726: result: 1
> configure:5741: checking for lt_dlmutex_register in -lltdl
> configure:5774: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -lltdl  -L/usr/local/lib >&5
> /tmp/ccBr4HYj.o: In function `main':
> /tmp/ccBr4HYj.o(.text+0x7): undefined reference to `lt_dlmutex_register'
> configure:5777: $? = 1
> configure: failed program was:
> #line 5748 "configure"
> #include "confdefs.h"
> 
> /* Override any gcc2 internal prototype to avoid an error.  */
> #ifdef __cplusplus
> extern "C"
> #endif
> /* We use char because int might match the return type of a gcc2
>    builtin and then its argument prototype would still apply.  */
> char lt_dlmutex_register ();
> #ifdef F77_DUMMY_MAIN
> #  ifdef __cplusplus
>      extern "C"
> #  endif
>    int F77_DUMMY_MAIN() { return 1; }
> #endif
> int
> main ()
> {
> lt_dlmutex_register ();
>   ;
>   return 0;
> }
> configure:5794: result: no
> configure:5811: checking for main in -lltdl
> configure:5838: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c -lltdl  -L/usr/local/lib >&5
> configure:5841: $? = 0
> configure:5844: test -s conftest
> configure:5847: $? = 0
> configure:5858: result: yes
> configure:5999: checking for ld used by GCC
> configure:6062: result: /usr/libexec/elf/ld
> configure:6071: checking if the linker (/usr/libexec/elf/ld) is GNU ld
> GNU ld version 2.11.2 20010719 [FreeBSD] (with BFD 2.11.2 20010719 [FreeBSD])
> configure:6083: result: yes
> configure:6088: checking for /usr/libexec/elf/ld option to reload object files
> configure:6095: result: -r
> configure:6100: checking for BSD-compatible nm
> configure:6136: result: /usr/bin/nm -B
> configure:6139: checking for a sed that does not truncate output
> configure:6221: result: /usr/bin/sed
> configure:6224: checking how to recognise dependant libraries
> configure:6405: result: pass_all
> configure:6417: checking command to parse /usr/bin/nm -B output
> configure:6498: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:6501: $? = 0
> configure:6505: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
> configure:6508: $? = 0
> configure:6560: cc -o conftest -O -pipe  -I/usr/local/include  conftest.c conftstm.o >&5
> configure:6563: $? = 0
> configure:6607: result: ok
> configure:6616: checking for dlfcn.h
> configure:6621: result: yes
> configure:6910: checking for ranlib
> configure:6926: found /usr/bin/ranlib
> configure:6937: result: ranlib
> configure:6990: checking for strip
> configure:7006: found /usr/bin/strip
> configure:7017: result: strip
> configure:7228: checking for objdir
> configure:7239: result: .libs
> configure:7256: checking for cc option to produce PIC
> configure:7402: result: -fPIC
> configure:7406: checking if cc PIC flag -fPIC works
> configure:7432: cc -c -O -pipe  -fPIC -DPIC -I/usr/local/include conftest.c >&5
> configure:7435: $? = 0
> configure:7438: test -s conftest.o
> configure:7441: $? = 0
> configure:7478: result: yes
> configure:7494: checking if cc static flag -static works
> configure:7521: cc -o conftest -O -pipe  -I/usr/local/include  -static conftest.c -L/usr/local/lib >&5
> configure:7524: $? = 0
> configure:7527: test -s conftest
> configure:7530: $? = 0
> configure:7545: result: yes
> configure:7557: checking if cc supports -c -o file.o
> configure:7579: cc -c -O -pipe  -o out/conftest2.o -I/usr/local/include conftest.c >&5
> configure:7601: result: yes
> configure:7606: checking if cc supports -c -o file.lo
> configure:7636: cc -c -O -pipe  -c -o conftest.lo -I/usr/local/include conftest.c >&5
> configure:7639: $? = 0
> configure:7642: test -s conftest.lo
> configure:7645: $? = 0
> configure:7666: result: yes
> configure:7697: checking if cc supports -fno-rtti -fno-exceptions
> configure:7722: cc -c -O -pipe  -fno-rtti -fno-exceptions -c conftest.c -I/usr/local/include conftest.c >&5
> configure:7725: $? = 0
> configure:7728: test -s conftest.o
> configure:7731: $? = 0
> configure:7747: result: yes
> configure:7758: checking whether the linker (/usr/libexec/elf/ld) supports shared libraries
> configure:8450: result: yes
> configure:8455: checking how to hardcode library paths into programs
> configure:8479: result: immediate
> configure:8484: checking whether stripping libraries is possible
> configure:8489: result: yes
> configure:8500: checking dynamic linker characteristics
> configure:8902: result: freebsd4.6 ld.so
> configure:8907: checking if libtool supports shared libraries
> configure:8909: result: yes
> configure:8912: checking whether to build shared libraries
> configure:8933: result: yes
> configure:8936: checking whether to build static libraries
> configure:8940: result: yes
> configure:9602: checking whether -lc should be explicitly linked in
> configure:9610: cc -c -O -pipe  -I/usr/local/include conftest.c >&5
> configure:9613: $? = 0
> configure:9627: cc -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
> configure:9630: $? = 1
> configure:9643: result: yes
> configure:10315: creating ./config.status
> 
> ## ---------------------- ##
> ## Running config.status. ##
> ## ---------------------- ##
> 
> This file was extended by config.status, which was
> generated by GNU Autoconf 2.53.  Invocation command line was
> 
>   CONFIG_FILES    = 
>   CONFIG_HEADERS  = 
>   CONFIG_LINKS    = 
>   CONFIG_COMMANDS = 
>   $ ./config.status 
> 
> on happymaggot.stinkymeat.net
> 
> config.status:646: creating Makefile
> config.status:646: creating libmcrypt.spec
> config.status:646: creating lib/Makefile
> config.status:646: creating doc/Makefile
> config.status:646: creating src/Makefile
> config.status:646: creating modules/Makefile
> config.status:646: creating modules/modes/Makefile
> config.status:646: creating modules/algorithms/Makefile
> config.status:646: creating lib/mcrypt.h
> config.status:646: creating lib/libmcrypt-config
> config.status:750: creating config.h
> config.status:893: config.h is unchanged
> config.status:994: executing depfiles commands
> config.status:994: executing default-1 commands
> configure:11524: configuring in libltdl
> configure:11603: running /usr/local/bin/bash './configure' --prefix=/usr/local  '--prefix=/usr/local' '--build=i386-portbld-freebsd4.6' 'CC=cc' 'CFLAGS=-O -pipe ' 'CPPFLAGS=-I/usr/local/include' 'build_alias=i386-portbld-freebsd4.6' --enable-ltdl-install=no --cache-file=/dev/null --srcdir=.
> configure:11608: error: /usr/local/bin/bash './configure' failed for libltdl
> 
> ## ---------------- ##
> ## Cache variables. ##
> ## ---------------- ##
> 
> ac_cv_build=i386-portbld-freebsd4.6
> ac_cv_build_alias=i386-portbld-freebsd4.6
> ac_cv_c_bigendian=no
> ac_cv_c_compiler_gnu=yes
> ac_cv_c_inline=inline
> ac_cv_env_CC_set=set
> ac_cv_env_CC_value=cc
> ac_cv_env_CFLAGS_set=set
> ac_cv_env_CFLAGS_value='-O -pipe '
> ac_cv_env_CPPFLAGS_set=set
> ac_cv_env_CPPFLAGS_value=-I/usr/local/include
> ac_cv_env_CPP_set=
> ac_cv_env_CPP_value=
> ac_cv_env_LDFLAGS_set=
> ac_cv_env_LDFLAGS_value=
> ac_cv_env_build_alias_set=set
> ac_cv_env_build_alias_value=i386-portbld-freebsd4.6
> ac_cv_env_host_alias_set=
> ac_cv_env_host_alias_value=
> ac_cv_env_target_alias_set=
> ac_cv_env_target_alias_value=
> ac_cv_exeext=
> ac_cv_func_bcopy=yes
> ac_cv_func_bzero=yes
> ac_cv_func_memmove=yes
> ac_cv_func_memset=yes
> ac_cv_func_mlock=yes
> ac_cv_func_readdir=yes
> ac_cv_func_readdir_r=yes
> ac_cv_header_byteswap_h=no
> ac_cv_header_dirent_h=yes
> ac_cv_header_dlfcn_h=yes
> ac_cv_header_endian_h=no
> ac_cv_header_inttypes_h=yes
> ac_cv_header_limits_h=yes
> ac_cv_header_memory_h=yes
> ac_cv_header_stdc=yes
> ac_cv_header_stdint_h=no
> ac_cv_header_stdlib_h=yes
> ac_cv_header_string_h=yes
> ac_cv_header_strings_h=yes
> ac_cv_header_sys_endian_h=no
> ac_cv_header_sys_mman_h=yes
> ac_cv_header_sys_stat_h=yes
> ac_cv_header_sys_types_h=yes
> ac_cv_header_unistd_h=yes
> ac_cv_host=i386-portbld-freebsd4.6
> ac_cv_host_alias=i386-portbld-freebsd4.6
> ac_cv_lib_ltdl_lt_dlmutex_register=no
> ac_cv_lib_ltdl_main=yes
> ac_cv_objext=o
> ac_cv_prog_AWK=awk
> ac_cv_prog_CPP='cc -E'
> ac_cv_prog_ac_ct_CC=cc
> ac_cv_prog_ac_ct_RANLIB=ranlib
> ac_cv_prog_ac_ct_STRIP=strip
> ac_cv_prog_cc_g=yes
> ac_cv_prog_cc_stdc=
> ac_cv_prog_make_make_set=yes
> ac_cv_sizeof_unsigned_char=1
> ac_cv_sizeof_unsigned_int=4
> ac_cv_sizeof_unsigned_long_int=4
> ac_cv_sizeof_unsigned_short_int=2
> ac_cv_target=i386-portbld-freebsd4.6
> ac_cv_target_alias=i386-portbld-freebsd4.6
> ac_cv_type_unsigned_char=yes
> ac_cv_type_unsigned_int=yes
> ac_cv_type_unsigned_long_int=yes
> ac_cv_type_unsigned_short_int=yes
> am_cv_CC_dependencies_compiler_type=gcc
> lt_cv_archive_cmds_need_lc=yes
> lt_cv_compiler_c_o=yes
> lt_cv_compiler_o_lo=yes
> lt_cv_deplibs_check_method=pass_all
> lt_cv_file_magic_cmd='$MAGIC_CMD'
> lt_cv_file_magic_test_file=
> lt_cv_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr) \&\2},/p'\'''
> lt_cv_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern char \1;/p'\'''
> lt_cv_ld_reload_flag=-r
> lt_cv_path_LD=/usr/libexec/elf/ld
> lt_cv_path_NM='/usr/bin/nm -B'
> lt_cv_path_SED=/usr/bin/sed
> lt_cv_prog_cc_can_build_shared=yes
> lt_cv_prog_cc_no_builtin=
> lt_cv_prog_cc_pic=' -fPIC'
> lt_cv_prog_cc_pic_works=yes
> lt_cv_prog_cc_shlib=
> lt_cv_prog_cc_static=-static
> lt_cv_prog_cc_static_works=yes
> lt_cv_prog_cc_wl=-Wl,
> lt_cv_prog_gnu_ld=yes
> lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ 	]\([ABCDGISTW][ABCDGISTW]*\)[ 	][ 	]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'\'''
> lt_cv_sys_path_separator=:
> 
> configure: exit 1
> 
> 
> 
> 
> 
> 
> 
> 
> Mahlon E. Smith                        jabber id: mahlon@chat.martini.nu
> http://www.martini.nu/               get pgp key:  mahlon-pgp@martini.nu
> ........................................................................
>  There is no reason for an individual to have a computer in their home.
>        -Ken Olson, President, Digital Equipment Corporation, 1977
-- 
Larry Rosenman                     http://www.lerctr.org/~ler
Phone: +1 972-414-9812                 E-Mail: ler@lerctr.org
US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1030754373.455.2.camel>