Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 11 Dec 2000 14:52:42 -0800
From:      "David O'Brien" <obrien@FreeBSD.ORG>
To:        alpha@FreeBSD.ORG
Subject:   Re: -current not bootable on Rawhide (as4100)
Message-ID:  <20001211145242.A88817@dragon.nuxi.com>
In-Reply-To: <14901.22315.914524.872886@grasshopper.cs.duke.edu>; from gallatin@cs.duke.edu on Mon, Dec 11, 2000 at 05:38:47PM -0500
References:  <20001211143132.A33433@dragon.nuxi.com> <14901.22315.914524.872886@grasshopper.cs.duke.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Dec 11, 2000 at 05:38:47PM -0500, Andrew Gallatin wrote:
> Booting a kernel built last night produces:
> 
>     panic: cpu_initclocks: no clock attached

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sio 0 at to isa (string)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 flags to 80 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting vga 0 at to isa (string)
FreeBSD 5.0-CURRENT #0: Mon Dec 11 12:34:34 PST 2000
    rootk@rawhide.osd.bsdi.com:/1/obj/usr/src/sys/GENERIC
AlphaServer 4100
AlphaServer 4100 5/300 2MB, 299MHz
8192 byte page size, 2 processors.
CPU: EV5 (21164) major=5 minor=5
OSF PAL rev: 0x4000200020117
real memory  = 534757376 (522224K bytes)
Physical memory chunk(s):
0x007da000 - 0x1fff3fff, 528588800 bytes (64525 pages)
avail memory = 514400256 (502344K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007ba000.
random: <entropy source>
mem: <memory & I/O>
null: <null device, zero device>
Creating DISK md0
md0: Malloc disk
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0: physical bus=0
found->	vendor=0x1000, dev=0x0001, revid=0x02
	bus=0, slot=1, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=4
	map[10]: type 4, range 32, base 01fffe00, size  8, enabled
	map[14]: type 1, range 32, base 07fffe00, size  8, enabled
found->	vendor=0x1011, dev=0x0009, revid=0x11
	bus=0, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=8
	map[10]: type 4, range 32, base 01ffff00, size  7, enabled
	map[14]: type 1, range 32, base 07ffff00, size  7, enabled
pci0: <PCI bus> on pcib0
sym0: <810> port 0x1fffe00-0x1fffeff mem 0x7fffe00-0x7fffeff irq 4 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final   SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 267 msec, 33289 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: interrupting at IRQ 0x10 intA (vec 0xb40)
de0: <Digital 21140 Fast Ethernet> port 0x1ffff00-0x1ffff7f mem 0x7ffff00-0x7ffff7f irq 8 at device 2.0 on pci0
de0: interrupting at IRQ 0x0 intA (vec 0xb80)
de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.1
de0: address 00:00:f8:00:3c:ec
de0: enabling Full Duplex 100baseTX port
bpf: de0 attached
pcib1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
pcib1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
Attaching Real Console
pci1: physical bus=0
found->	vendor=0x8086, dev=0x0482, revid=0x15
	bus=0, slot=1, func=0
	class=00-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x5333, dev=0x8811, revid=0x00
	bus=0, slot=2, func=0
	class=88-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base 07800000, size 23, enabled
found->	vendor=0x1011, dev=0x0001, revid=0x02
	bus=0, slot=4, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=0 	secondarybus=0
pci1: <PCI bus> on pcib1
pci1: <old, non-VGA display device> at 1.0 (no driver attached)
pci1: <unknown> at 2.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 4.0 on pci1
pcib2:   secondary bus     6
pcib2:   subordinate bus   6
pcib2:   I/O decode        0x60000-0x60fff
pcib2:   memory decode     0x0-0xfffff
pcib2:   prefetched decode 0x0-0xfffff
pci2: physical bus=6
pci2: <PCI bus> on pcib2
panic: cpu_initclocks: no clock attached


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001211145242.A88817>