Date: Thu, 11 Jan 2007 01:21:46 -0500 From: "Lion G." <liontanker@hotmail.com> To: freebsd-multimedia@freebsd.org Cc: ariff@FreeBSD.org Subject: RE: Laptop speaker vs earphone Message-ID: <BAY21-F140DB377D0DCE0C785EC19CCB10@phx.gbl>
next in thread | raw e-mail | index | archive | help
Ariff Abdullah wrote: >Hmm.. weird.. I'm puzzled... >Send your _verbose_ dmesg :) Sure. As another poster pointed out though, this is most likely a hardware issue, so I'm guessing it is not a driver issue (though I'm hoping there's some sort of sysctl/driver knob that would at least allow me to manually enable/disable the speaker or something...) There are 3 plugs on this laptop: First one has a earphone symbol, plus the word SPDIF. Second one has a line-out symbol. Third one has a line-in symbol. I tried plugging in the earphone into each, but none of it stopped the speaker. Here is the dmesg output: Thank you for your time, and thank you for the great sound driver! I was audio-less for a long time until I found out about your snd_hda driver. :) -- Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RC2 #0: Thu Jan 4 17:22:15 UTC 2007 WARNING: MPSAFE network stack disabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Turion(tm) 64 Mobile Technology MK-36 (1999.99-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40fc2 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8> real memory = 938016768 (894 MB) avail memory = 908660736 (866 MB) ACPI APIC Table: <PTLTD APIC > ACPI: Overriding _OS definition with "Windows 2001" ACPI-0377: *** Info: Table [SSDT] replaced by host OS ACPI: overriding DSDT/SSDT with custom table ACPI-0377: *** Info: Table [DSDT] replaced by host OS MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci6: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci7: <ACPI PCI bus> on pcib5 atapci0: <ATI IXP400 SATA150 controller> port 0x8440-0x8447,0x8434-0x8437,0x8438-0x843f,0x8430-0x8433,0x8400-0x840f mem 0xc0004000-0xc00041ff irq 22 at device 18.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ohci0: <ATI SB400 USB Controller> mem 0xc0005000-0xc0005fff irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xc0006000-0xc0006fff irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered pci0: <serial bus, USB> at device 19.2 (no driver attached) pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci8: <ACPI PCI bus> on pcib6 cbb0: <PCI-CardBus Bridge> mem 0xc0202000-0xc0202fff irq 23 at device 1.0 on pci8 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci8: <memory, flash> at device 1.1 (no driver attached) pci8: <base peripheral> at device 1.2 (no driver attached) pci8: <memory, flash> at device 1.3 (no driver attached) pci8: <memory, flash> at device 1.4 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0203c00-0xc0203cff irq 20 at device 2.0 on pci8 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:16:36:b5:ce:de rl0: [GIANT-LOCKED] pci8: <network> at device 4.0 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub2: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/6.0b, addr 2 uhub2: 4 ports with 4 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.08, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: vendor 0x05a4 USB Compliant Keyboard, rev 1.10/1.10, addr 4, iclass 3/1 kbd2 at ukbd0 uhid0: vendor 0x05a4 USB Compliant Keyboard, rev 1.10/1.10, addr 4, iclass 3/1 Timecounter "TSC" frequency 1999988764 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled ad0: 114473MB <WDC WD1200UE-22KVT0 01.03K01> at ata0-master UDMA100 acd0: DVDR <HL-DT-ST DVDRAM GSA-T10N/PP02> at ata0-slave UDMA33 cd0 at ata0 bus 0 target 1 lun 0 cd0: <HL-DT-ST DVDRAM GSA-T10N PP02> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad0s3a GEOM_ELI: Device ad0s3d.eli created. GEOM_ELI: Encryption: AES-CBC 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ad0s3b.eli created. GEOM_ELI: Encryption: AES-CBC 256 GEOM_ELI: Crypto: software rl0: link state changed to UP vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $ vmmon: Module vmmon: initialized pcm0: <ATI SB450 High Definition Audio Controller> mem 0xc0000000-0xc0003fff irq 16 at device 20.2 on pci0 pcm0: <HDA Codec: Realtek ALC883> pcm0: <HDA Driver Revision: 20061210_0037> _________________________________________________________________ The MSN Entertainment Guide to Golden Globes is here. Get all the scoop. http://tv.msn.com/tv/globes2007/?icid=nctagline2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY21-F140DB377D0DCE0C785EC19CCB10>