Date: Thu, 31 Dec 2015 23:05:34 -0800 From: Adrian Chadd <adrian.chadd@gmail.com> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: ath0 messages spamming /var/log/messages Message-ID: <CAJ-Vmom9DAUcn_gEZOAKwn4s6fnuL7Vq4GNEk04eL3eDY1ejVw@mail.gmail.com> In-Reply-To: <20151229102645.GB40090@potato.growveg.org> References: <20151229102645.GB40090@potato.growveg.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Try updating to -head. I've implemented more of those missing routines. -a On 29 December 2015 at 02:26, John <freebsd-lists@potato.growveg.org> wrote: > Hello list, > > On an acer laptop I'm running 10.2 r292394. Wireless on this is seen > as Atheros AR9485 and it runs fine apart from it spamming > /var/log/messages with this: > > Dec 29 10:12:07 acer kernel: Limiting closed port RST response from > 210 to 200 packets/sec > Dec 29 10:12:09 acer kernel: Limiting closed port RST response from > 215 to 200 packets/sec > Dec 29 10:12:11 acer kernel: Limiting closed port RST response from > 220 to 200 packets/sec > Dec 29 10:12:20 acer kernel: ar9300_Stub_GetAntennaSwitch: called > Dec 29 10:12:20 acer kernel: ar9300_Stub_GetAntennaSwitch: called > Dec 29 10:12:20 acer kernel: ar9300_Stub_GetCTSTimeout: called > Dec 29 10:12:20 acer kernel: ar9300_Stub_GetCTSTimeout: called > Dec 29 10:12:41 acer kernel: ar9300_Stub_GetAntennaSwitch: called > Dec 29 10:12:41 acer kernel: ar9300_Stub_GetAntennaSwitch: called > Dec 29 10:12:41 acer kernel: ar9300_Stub_GetCTSTimeout: called > Dec 29 10:12:41 acer kernel: ar9300_Stub_GetCTSTimeout: called > Dec 29 10:13:01 acer kernel: ar9300_Stub_GetAntennaSwitch: called > Dec 29 10:13:01 acer kernel: ar9300_Stub_GetAntennaSwitch: called > > Is there a tweak or something I can invoke to stop this from > happening? The on-board wifi is seen as: > > ath0: <Atheros AR9485> mem 0xf0100000-0xf017ffff irq 17 at device 0.0 > on pci2 > > Initial output from dmesg.boot shows this: > > ar9300_set_stub_functions: setting stub functions > ar9300_set_stub_functions: setting stub functions > ar9300_attach: calling ar9300_hw_attach > ar9300_hw_attach: calling ar9300_eeprom_attach > ar9300_flash_map: unimplemented for now > Restoring Cal data from DRAM > Restoring Cal data from EEPROM > Restoring Cal data from Flash > Restoring Cal data from Flash > Restoring Cal data from OTP > ar9300_hw_attach: ar9300_eeprom_attach returned 0 > ath0: RX status length: 48 > ath0: RX buffer size: 4096 > ath0: TX descriptor length: 128 > ath0: TX status length: 36 > ath0: TX buffers per descriptor: 4 > ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0 > ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries > ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 RX streams; 1 TX streams > ath0: AR9485 mac 576.1 RF5110 phy 33.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > > The wifi works fine apart from the chatty output. > > thanks, > -- > John _______________________________________________ > freebsd-questions@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmom9DAUcn_gEZOAKwn4s6fnuL7Vq4GNEk04eL3eDY1ejVw>