Date: Thu, 20 Oct 2005 13:15:49 +0200 From: Marcin Jessa <lists@yazzy.org> To: Gleb Smirnoff <glebius@FreeBSD.org> Cc: current@FreeBSD.org, net@FreeBSD.org Subject: Re: PPPoE and Radius on 6.0RC1 Message-ID: <20051020131549.5e432073.lists@yazzy.org> In-Reply-To: <20051020070145.GA59364@cell.sick.ru> References: <20051019235111.2225345e.lists@yazzy.org> <20051020070145.GA59364@cell.sick.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 20 Oct 2005 11:01:45 +0400 Gleb Smirnoff <glebius@FreeBSD.org> wrote: > On Wed, Oct 19, 2005 at 11:51:11PM +0200, Marcin Jessa wrote: > M> It seems like PPPoE stoped working with support for radius on 6.0 > M> The log of pppoe and freeradius does not show pppoe attempting to > M> even talk to the radius server. Additionally this message pops up > M> when enabling pppoed: WARNING: attempt to net_add_domain(netgraph) > M> after domainfinalize() My setup worked fine before on FreeBSD 5.x > M> Is that a known issue and is it being worked on? > > Please show your PPPoE server configuration. Do you use pppoed or mpd? I use pppoed. Adding netgraph_load="YES" ng_socket_load="YES" to /boot/loader.conf fixed it on my 6.0RC1 ( thanks Julian Elischer ) Frankly I don't understand why this is needed since pppoed loads those modules when it starts up. This is my ppp.conf, just for the record: default: #set log Chat Command Phase #turn on some logging. See man ppp.conf for info set log Chat Command Phase hdlc lqm ipcp enable mschapv2 mschap chap mppe #turn on chap and pap accounting #enable pap mschapv2 mschap chap mppe #turn on chap and pap accounting #enable pap #turn on chap and pap accounting allow mode direct #turn on ppp bridging enable proxy #turn on ppp proxyarping (redundant of above???) disable ipv6cp #we don't use ipv6, don't want the errors set mru 1472 #set mru below 1500 (PPPoE MTU issue) set mtu 1472 #set mtu below 1500 (PPPoE MTU issue) set timeout 0 #no mins time restriction on users #set timeout never set mppe 128 * set ifaddr 192.168.2.8 192.168.2.100-192.168.1.120 255.255.255.255 set log phase ipcp lcp debug #additional debugging nat enable yes set dns 192.168.2.45 192.168.2.8 #set speed sync set cd 3 # checks for the existence of carrier once per second for 5 seconds #set cd 5! #enable echo enable lqr set reconnect 1 5 # Should the line drop unexpectedly , a connection will be re-established after the given timeout. #Specify my wifi gateway IP as well as DHCP pool range set radius /etc/ppp/radius.conf #turn on radius auth and use this file accept dns #turn on dns cacheing/forwarding #enable pap mschapv2 mschap chap mppe #turn on chap and pap accounting disable pap pred1 deflate #disable pred1 and deflate compression along with pap deny pap pred1 deflate #refuse when ask for it
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051020131549.5e432073.lists>