Date: Mon, 29 Dec 2003 18:41:30 +0200 From: Esa Karkkainen <ejk@iki.fi> To: current@freebsd.org Subject: 5.1-R-p11 unable to "sync disks" when shutting down Message-ID: <20031229164130.GA797@pp.htv.fi>
next in thread | raw e-mail | index | archive | help
--82I3+IH0IqGh5yIs Content-Type: text/plain; charset=us-ascii Content-Disposition: inline For some reason my home PC is occasionally unable to sync to disk when I run "shutdown -p now". The HW in question is a Shuttle SN45G which has NVIDIA nForce2 Ultra 400 North bridge and MCP-T South bridge. I've attached dmesg to this e-mail. I managed to activate kernel debugger with ctrl-alt-esc, but I was little bit late so "sync disks" had already given up. Then I ran "panic" command from debugger so I would have a dump which might help to find out why this happened. The only hard disk has four slices. ad0s1 has w2k, ad0s2 has 5.2-BETA, ad0s3 has 5.1-R-p11 and ad0s4 has /home, /usr/ports and /scratch filesystems. When installing 5.2-BETA I managed to lose (due to my error) ad0s3 and ad0s4 disklabels. The ad0s4 (which has only UFS1 filesystems) disklabel was reconstructed by using Niall Smart's "findsb" and I had a copy of the ad0s3 disklabel at my $HOME dir. --82I3+IH0IqGh5yIs Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE-p11 #4: Sat Dec 13 17:28:07 EET 2003 root@thunderbolt.my.domain:/usr/obj/usr/src/sys/THUNDERBOLT Preloaded elf kernel "/boot/kernel/kernel" at 0xc0415000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0415244. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04152f0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc041539c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2079560211 Hz CPU: AMD Athlon(tm) XP 2600+ (2079.56-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 1073676288 (1023 MB) avail memory = 1038655488 (990 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <XPC AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00fdf10 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pci0: <serial bus, USB> at device 2.0 (no driver attached) pci0: <serial bus, USB> at device 2.1 (no driver attached) pci0: <serial bus, USB> at device 2.2 (no driver attached) pci0: <network, ethernet> at device 4.0 (no driver attached) pci0: <multimedia, audio> at device 5.0 (no driver attached) pcm0: <Nvidia nForce2 AC97 controller> port 0xd800-0xd87f,0xd400-0xd4ff mem 0xe8081000-0xe8081fff irq 5 at device 6.0 on pci0 pcm0: <Avance Logic ALC650 AC97 Codec> pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci1: <ACPI PCI bus> on pcib1 atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, FireWire> at device 13.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib2 pci3: <display, VGA> at device 0.0 (no driver attached) sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xd4000-0xd57ff,0xd0000-0xd3fff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounters tick every 10.000 msec ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master UDMA100 acd0: CD-RW <PLEXTOR CD-R PX-320A> at ata1-master WDMA2 Mounting root from ufs:/dev/ad0s3a WARNING: / was not properly dismounted nv0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd000-0xd007 mem 0xe8087000-0xe8087fff irq 11 at device 4.0 on pci0 nv0: Ethernet address 00:30:1b:af:7d:cc miibus0: <MII bus> on nv0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ohci0: <OHCI (generic) USB controller> mem 0xe8080000-0xe8080fff irq 5 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xe8083000-0xe8083fff irq 10 at device 2.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe8086000-0xe80860ff irq 11 at device 2.2 on pci0 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x10de) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered nvidia0: <GeForce4 Ti 4400> mem 0xd8000000-0xd807ffff,0xd0000000-0xd7ffffff,0xe4000000-0xe4ffffff irq 10 at device 0.0 on pci3 pid 522 (squid), uid 65534: exited on signal 6 --82I3+IH0IqGh5yIs--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031229164130.GA797>