Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Aug 1999 08:03:15 +0200
From:      Marc Fonvieille <fonvi@club-internet.fr>
To:        Evren Yurtesen <yurtesen@ispro.net.tr>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: BT878-TV card failure
Message-ID:  <19990809080314.A2229@vobiscum.styx.org>
In-Reply-To: <37ADD693.757E3B96@ispro.net.tr>; from Evren Yurtesen on Sun, Aug 08, 1999 at 10:12:19PM %2B0300
References:  <37ADD693.757E3B96@ispro.net.tr>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Aug 08, 1999 at 10:12:19PM +0300, Evren Yurtesen wrote:
> Hello,
> I have a tekram bt878 tv card. On FreeBSD, Tekram was not supported
> as far as I have found out from the LINT file. 
> I have tried avermedia drivers under windows and they are working very
> good. 
> so I decided to try to set it from the kernel configuration file
> and when the system is booting it gives information about avermedia etc.
> that it found that card. (I also tried different kind of tuners)
> I am using fxtv program to try it.
> Well, the problem is when I start fxtv the system is hanging and then 
> I see these error messages in the logs. (well I also got a few garbage
> frames on fxtv)
> 
> Aug  2 14:00:50 suomi /kernel: wd2: interrupt timeout (status
> 58<rdy,seekdone,drq> error 1<no_dam>)
> Aug  2 14:01:20 suomi /kernel: wd2: wdtimeout() DMA status 4
> Aug  2 14:01:21 suomi /kernel: wd2: interrupt timeout (status
> 58<rdy,seekdone,drq> error 1<no_dam>)
> Aug  2 14:01:21 suomi /kernel: wd2: wdtimeout() DMA status 4
> Aug  2 14:01:21 suomi /kernel: wd2: interrupt timeout (status
> 58<rdy,seekdone,drq> error 1<no_dam>)
> Aug  2 14:01:21 suomi /kernel: wd2: wdtimeout() DMA status 4
> Aug  2 14:02:02 suomi /kernel: wd2: Last time I say: interrupt timeout. 
> Probably a portable PC. (status 58<rdy,seekdone,drq> error 1<no_dam>)
> Aug  2 14:02:30 suomi /kernel: wd2: wdtimeout() DMA status 4
> Aug  2 14:11:26 suomi /kernel: psmintr: out of sync (00c0 != 0000).
>
What's the irq use by the tv card? It isn't the same than the hd
controller? I remember some problems with irqs and tv cards: sometimes
they take irq already used...
Try to change the pci slot for the tv card.

Marc


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990809080314.A2229>