Date: Tue, 18 Jun 2002 18:34:32 +0200 From: Andreas Burmester <andreas.burmester@chello.se> To: freebsd-hardware@freebsd.org Subject: snd_cmi.ko unable to detect SOYO Dragon plus! mobo's onboard CMI8338 soundcard Message-ID: <200206181834.32496.andreas.burmester@chello.se>
next in thread | raw e-mail | index | archive | help
Hi
I got a SOYO Dragon plus mobo which has a CMI8338 onboard card and I cant get
my kernel to detect the card with the snd_cmi.ko loaded. Have anyone got this
working? I know that the card works since it runs in both linux and windows.
MYKERNEL is the same as the GENERIC one, I just tried to add the pcm driver
and removed it again.
The CMI8338 card is supported acording to the 4.5-RELEASE's hardware errat.
Please add me to the CC: line if replying snice im not a part of this list.
Any help would be most useful.
Regards
-Andreas
gandalf# uname -a
FreeBSD gandalf.chello.se 4.5-RELEASE FreeBSD 4.5-RELEASE #0: Mon Jun 17
23:32:28 CEST 2002 root@gandalf.chello.se:/usr/src/sys/compile/MYKERNEL
i386
gandalf# dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Mon Jun 17 23:32:28 CEST 2002
root@gandalf.chello.se:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 1600+ (1399.85-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (524224K bytes)
avail memory = 516456448 (504352K bytes)
Preloaded elf kernel "kernel" at 0xc05b2000.
Preloaded elf module "snd_cmi.ko" at 0xc05b209c.
Preloaded elf module "snd_pcm.ko" at 0xc05b213c.
Preloaded elf module "NVdriver.ko" at 0xc05b21dc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
NVdriver0: <NVIDIA> mem 0xe0000000-0xe7ffffff,0xec000000-0xecffffff irq 11 at
device 0.0 on pci1
reg_physical_address = ec000000
fb_physical_address = e0000000
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 17.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 17.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 17.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 10 at device 17.4 on
pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe000-0xe0ff mem
0xee000000-0xee0000ff irq 11 at device 18.0 on pci0
vr0: Ethernet address: 00:50:2c:04:3b:0b
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-master UDMA100
ad1: 76319MB <WDC WD800BB-40BSA0> [155061/16/63] at ata0-slave UDMA100
acd0: CD-RW <_NEC NR-7500A> at ata1-master using PIO4
acd1: CDROM <Pioneer CD-ROM ATAPI Model DR-744 0102> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
NV0: open by process 115
NV0: regs=0xd7b7a000
NV0: regs=0xd8b7a000
fb_physical
fb_physical
NV0: open by process 115
NV0: regs=0xd7b7a000
NV0: regs=0xd8b7a000
fb_physical
fb_physical
kmem_alloc: e0b7a000
00010000
kmem_alloc: e0b8a000
00001000
kmem_alloc: e0b8b000
00008000
00010000
00001000
00008000
gandalf#
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200206181834.32496.andreas.burmester>