Date: Wed, 31 Dec 2003 15:56:20 +0200 From: "Denis Prezhevalsky" <cypher@netvision.net.il> To: <freebsd-scsi@freebsd.org> Subject: SCSI tape problem Message-ID: <560FC34DB0095B459060688A7818E04F05B1BF@ntx2.forest.netvision.net.il>
next in thread | raw e-mail | index | archive | help
Hello,
I hope this is the right list for my problem.
I recently installed FreeBSD 5.1-RELEASE on HP DL380 G3.
The problem is that that FreeBSD not probing/recognizing my external =
Compaq AIT 35 SCSI tape
connected to the SCSI port located on the back of the server (built-in =
SCSI LVD).=20
When the computer starting up, I can see the BIOS message that the tape =
is recognized,
but when FreeBSD started - nothing. Running camcontrol :
mail# camcontrol devlist -v
scbus0 on ciss0 bus 0:
<COMPAQ RAID 1 VOLUME OK> at scbus0 target 0 lun 0 (pass0,da0)
<COMPAQ RAID 5 VOLUME OK> at scbus0 target 1 lun 0 (pass1,da1)
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
The same results even after running camcontrol rescan all.
Changing SCSI id doesn't help. The tape is fine - running on another =
machine without any problem.
Any help?
I'm attaching dmesg and kernel conf.
Dec 31 14:57:56 mail kernel: Copyright (c) 1992-2003 The FreeBSD =
Project.
Dec 31 14:57:56 mail kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, =
1989, 1991, 1992, 1993, 1994
Dec 31 14:57:56 mail kernel: The Regents of the University of =
California. All rights reserved.
Dec 31 14:57:57 mail kernel: FreeBSD 5.1-RELEASE #0: Wed Dec 31 12:37:06 =
IST 2003
Dec 31 14:57:57 mail kernel: =
admin@mail.ort.org.il:/usr/src/sys/i386/compile/SMP31Dec2003
Dec 31 14:57:57 mail kernel: Preloaded elf kernel "/boot/kernel/kernel" =
at 0xc0434000.
Dec 31 14:57:57 mail kernel: Preloaded elf module "/boot/kernel/acpi.ko" =
at 0xc0434244.
Dec 31 14:57:57 mail kernel: Timecounter "i8254" frequency 1193182 Hz
Dec 31 14:57:57 mail kernel: Timecounter "TSC" frequency 2784983072 Hz
Dec 31 14:57:57 mail kernel: CPU: Intel(R) Xeon(TM) CPU 2.80GHz =
(2784.98-MHz 686-class CPU)
Dec 31 14:57:57 mail kernel: Origin =3D "GenuineIntel" Id =3D 0xf29 =
Stepping =3D 9
Dec 31 14:57:57 mail kernel: =
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,P
AT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Dec 31 14:57:57 mail kernel: Hyperthreading: 2 logical CPUs
Dec 31 14:57:57 mail kernel: real memory =3D 2147459072 (2047 MB)
Dec 31 14:57:57 mail kernel: avail memory =3D 2085732352 (1989 MB)
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #0
Dec 31 14:57:57 mail kernel: IOAPIC #0 intpin 2 -> irq 0
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #1
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #2
Dec 31 14:57:57 mail kernel: Programming 16 pins in IOAPIC #3
Dec 31 14:57:57 mail kernel: FreeBSD/SMP: Multiprocessor System =
Detected: 4 CPUs
Dec 31 14:57:57 mail kernel: cpu0 (BSP): apic id: 0, version: =
0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: cpu1 (AP): apic id: 1, version: =
0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: cpu2 (AP): apic id: 6, version: =
0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: cpu3 (AP): apic id: 7, version: =
0x00050014, at 0xfee00000
Dec 31 14:57:57 mail kernel: io0 (APIC): apic id: 2, version: =
0x000f0011, at 0xfec00000
Dec 31 14:57:57 mail kernel: io1 (APIC): apic id: 3, version: =
0x000f0011, at 0xfec01000
Dec 31 14:57:57 mail kernel: io2 (APIC): apic id: 4, version: =
0x000f0011, at 0xfec02000
Dec 31 14:57:57 mail kernel: io3 (APIC): apic id: 5, version: =
0x000f0011, at 0xfec03000
Dec 31 14:57:57 mail kernel: Pentium Pro MTRR support enabled
Dec 31 14:57:57 mail kernel: npx0: <math processor> on motherboard
Dec 31 14:57:57 mail kernel: npx0: INT 16 interface
Dec 31 14:57:57 mail kernel: acpi0: <COMPAQ P29 > on motherboard
Dec 31 14:57:57 mail kernel: ACPI-0629: *** Info: There are no GPE =
blocks defined in the FADT
Dec 31 14:57:57 mail kernel: acpi0: power button is handled as a fixed =
feature programming model.
Dec 31 14:57:57 mail kernel: Timecounter "ACPI-safe" frequency 3579545 =
Hz
Dec 31 14:57:57 mail kernel: pcibios: BIOS version 2.10
Dec 31 14:57:57 mail kernel: acpi_timer0: <32-bit timer at 3.579545MHz> =
port 0x920-0x923 on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu0: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu1: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu2: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu3: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu4: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu5: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu6: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_cpu7: <CPU> on acpi0
Dec 31 14:57:57 mail kernel: acpi_tz0: <thermal zone> on acpi0
Dec 31 14:57:57 mail kernel: pcib0: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:57 mail kernel: pci0: <ACPI PCI bus> on pcib0
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 0 -> irq 2
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 1 -> irq 3
Dec 31 14:57:57 mail kernel: pci0: <display, VGA> at device 3.0 (no =
driver attached)
Dec 31 14:57:57 mail kernel: pci0: <base peripheral> at device 4.0 (no =
driver attached)
Dec 31 14:57:57 mail kernel: pci0: <base peripheral> at device 4.2 (no =
driver attached)
Dec 31 14:57:57 mail kernel: isab0: <PCI-ISA bridge> at device 15.0 on =
pci0
Dec 31 14:57:57 mail kernel: isa0: <ISA bus> on isab0
Dec 31 14:57:57 mail kernel: atapci0: <ServerWorks CSB5 UDMA100 =
controller> port =
0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device =
15.1 on pci0
Dec 31 14:57:57 mail kernel: ata0: at 0x1f0 irq 14 on atapci0
Dec 31 14:57:57 mail kernel: ata1: simplex device, DMA on primary only
Dec 31 14:57:57 mail kernel: ata1: at 0x170 irq 15 on atapci0
Dec 31 14:57:57 mail kernel: pcib1: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:57 mail kernel: pci1: <ACPI PCI bus> on pcib1
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 14 -> irq 5
Dec 31 14:57:57 mail kernel: ciss0: <Compaq Smart Array 5i> port =
0x3000-0x30ff mem 0xf7cf0000-0xf7cf3fff,0xf7dc0000-0xf7dfffff irq 5 at =
device 3.0 on pci1
Dec 31 14:57:57 mail kernel: ciss0: using 256 of 1024 available commands
Dec 31 14:57:57 mail kernel: ciss0: 2 logical drives configured
Dec 31 14:57:57 mail kernel: ciss0: firmware 2.36
Dec 31 14:57:57 mail kernel: ciss0: 2 SCSI channels
Dec 31 14:57:57 mail kernel: ciss0: signature 'CISS'
Dec 31 14:57:57 mail kernel: ciss0: valence 1
Dec 31 14:57:57 mail kernel: ciss0: supported I/O methods =
0xe<simple,performant,MEMQ>
Dec 31 14:57:57 mail kernel: ciss0: active I/O method 0x3<simple>
Dec 31 14:57:57 mail kernel: ciss0: 4G page base 0x00000000
Dec 31 14:57:57 mail kernel: ciss0: interrupt coalesce delay 1000us
Dec 31 14:57:57 mail kernel: ciss0: interrupt coalesce count 16
Dec 31 14:57:57 mail kernel: ciss0: max outstanding commands 1024
Dec 31 14:57:57 mail kernel: ciss0: bus types 0x2<ultra3>
Dec 31 14:57:57 mail kernel: ciss0: server name ''
Dec 31 14:57:57 mail kernel: ciss0: heartbeat 0x1000003a
Dec 31 14:57:57 mail kernel: ciss0: 2 logical drives
Dec 31 14:57:57 mail kernel: ciss0: logical drive 1: RAID 1, 34304MB =
online
Dec 31 14:57:57 mail kernel: ciss0: logical drive 1: RAID 5, 419840MB =
online
Dec 31 14:57:57 mail kernel: pcib2: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:57 mail kernel: pci2: <ACPI PCI bus> on pcib2
Dec 31 14:57:57 mail kernel: IOAPIC #1 intpin 13 -> irq 7
Dec 31 14:57:58 mail kernel: IOAPIC #1 intpin 15 -> irq 10
Dec 31 14:57:58 mail kernel: bge0: <Broadcom BCM5703X Gigabit Ethernet, =
ASIC rev. 0x1002> mem 0xf7ef0000-0xf7efffff irq 7 at device 1.0 on pci2
Dec 31 14:57:58 mail kernel: bge0: Ethernet address: 00:0b:cd:dc:3a:53
Dec 31 14:57:58 mail kernel: miibus0: <MII bus> on bge0
Dec 31 14:57:58 mail kernel: brgphy0: <BCM5703 10/100/1000baseTX PHY> on =
miibus0
Dec 31 14:57:58 mail kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Dec 31 14:57:58 mail kernel: bge1: <Broadcom BCM5703X Gigabit Ethernet, =
ASIC rev. 0x1002> mem 0xf7ee0000-0xf7eeffff irq 10 at device 2.0 on pci2
Dec 31 14:57:58 mail kernel: bge1: Ethernet address: 00:0b:cd:dc:3a:52
Dec 31 14:57:58 mail kernel: miibus1: <MII bus> on bge1
Dec 31 14:57:58 mail kernel: brgphy1: <BCM5703 10/100/1000baseTX PHY> on =
miibus1
Dec 31 14:57:58 mail kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, =
100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
Dec 31 14:57:58 mail kernel: pcib3: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:58 mail kernel: pci3: <ACPI PCI bus> on pcib3
Dec 31 14:57:58 mail kernel: pcib4: <ACPI Host-PCI bridge> on acpi0
Dec 31 14:57:58 mail kernel: pci6: <ACPI PCI bus> on pcib4
Dec 31 14:57:58 mail kernel: IOAPIC #1 intpin 2 -> irq 11
Dec 31 14:57:58 mail kernel: pci6: <base peripheral> at device 30.0 (no =
driver attached)
Dec 31 14:57:58 mail kernel: atkbdc0: <Keyboard controller (i8042)> port =
0x64,0x60 irq 1 on acpi0
Dec 31 14:57:58 mail kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on =
atkbdc0
Dec 31 14:57:58 mail kernel: kbd0 at atkbd0
Dec 31 14:57:58 mail kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Dec 31 14:57:58 mail kernel: sio0: type 16550A
Dec 31 14:57:58 mail kernel: fdc0: <Enhanced floppy controller (i82077, =
NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
Dec 31 14:57:58 mail kernel: fdc0: FIFO enabled, 8 bytes threshold
Dec 31 14:57:58 mail kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Dec 31 14:57:58 mail kernel: orm0: <Option ROMs> at iomem =
0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
Dec 31 14:57:58 mail kernel: pmtimer0 on isa0
Dec 31 14:57:58 mail kernel: sc0: <System console> at flags 0x100 on =
isa0
Dec 31 14:57:58 mail kernel: sc0: VGA <16 virtual consoles, =
flags=3D0x300>
Dec 31 14:57:58 mail kernel: sio1: configured irq 3 not in bitmap of =
probed irqs 0
Dec 31 14:57:58 mail kernel: sio1: port may not be enabled
Dec 31 14:57:58 mail kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df =
iomem 0xa0000-0xbffff on isa0
Dec 31 14:57:58 mail kernel: APIC_IO: Testing 8254 interrupt delivery
Dec 31 14:57:58 mail kernel: APIC_IO: routing 8254 via IOAPIC #0 intpin =
2
Dec 31 14:57:58 mail kernel: Timecounters tick every 10.000 msec
Dec 31 14:57:58 mail kernel: ciss0: *** Cache enabled
Dec 31 14:57:58 mail kernel: acd0: CDROM <CD-224E> at ata0-master PIO4
Dec 31 14:57:58 mail kernel: da0 at ciss0 bus 0 target 0 lun 0
Dec 31 14:57:58 mail kernel: da0: <COMPAQ RAID 1 VOLUME OK> Fixed =
Direct Access SCSI-0 device
Dec 31 14:57:58 mail kernel: da0: 135.168MB/s transfers
Dec 31 14:57:58 mail kernel: da0: 34727MB (71122560 512 byte sectors: =
255H 32S/T 8716C)
Dec 31 14:57:58 mail kernel: da1 at ciss0 bus 0 target 1 lun 0
Dec 31 14:57:58 mail kernel: da1: <COMPAQ RAID 5 VOLUME OK> Fixed =
Direct Access SCSI-0 device
Dec 31 14:57:58 mail kernel: da1: 135.168MB/s transfers
Dec 31 14:57:58 mail kernel: da1: 420027MB (860216490 512 byte sectors: =
255H 63S/T 53546C)
Dec 31 14:57:58 mail kernel: SMP: AP CPU #1 Launched!
Dec 31 14:57:58 mail kernel: SMP: AP CPU #2 Launched!
Dec 31 14:57:58 mail kernel: SMP: AP CPU #3 Launched!
Dec 31 14:57:58 mail kernel: Mounting root from ufs:/dev/da0s1a
Kernel conf file:
machine i386
cpu I686_CPU
ident SMP17Nov2003
options SCHED_4BSD =20
options INET =20
options FFS =20
options SOFTUPDATES =20
options UFS_ACL =20
options UFS_DIRHASH =20
options MD_ROOT =20
options CD9660 =20
options PROCFS =20
options PSEUDOFS =20
options COMPAT_43 =20
options COMPAT_FREEBSD4 =20
options SCSI_DELAY=3D15000 =20
options KTRACE =20
options SYSVSHM =20
options SYSVMSG =20
options SYSVSEM =20
options _KPOSIX_PRIORITY_SCHEDULING=20
options KBD_INSTALL_CDEV =20
# SMP
options SMP =20
options APIC_IO =20
device isa
device pci
device fdc
# ATA and ATAPI devices
device ata
device atadisk =20
device atapicd =20
options ATA_STATIC_ID =20
=20
# RAID & SCSI
device ciss =20
device scbus =20
device ch =20
device da =20
device pass =20
device ses =20
device sa =20
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc =20
device atkbd =20
device vga =20
device sc
device agp =20
device npx
device pmtimer
device sio
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus =20
device bge =20
# Pseudo devices - the number indicates how many units to allocate.
device random =20
device loop =20
device ether =20
device pty =20
# The `bpf' device enables the Berkeley Packet Filter.
device bpf =20
# OPTIONAL
options QUOTA =20
options COMPAT_LINUX =20
Thanks in Advance!
Denis P.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?560FC34DB0095B459060688A7818E04F05B1BF>