Date: Sun, 22 May 2005 17:30:24 +0300 From: "Vladimir Chukharev" <chu@kemia.me.tut.fi> To: freebsd-usb@freebsd.org Subject: Camera stopped working after upgrade 4->5 Message-ID: <op.sq6k8ymj1taxl4@kempc17.me.tut.fi>
next in thread | raw e-mail | index | archive | help
Hi! I have a problem with digital camera on FreeBSD 5. The same camera worked well with FreeBSD 4, including one case of the same hardware, when I upgraded 4->5. I use gtkam program. With fbsd4 it opens the camera and allows to copy the photos. With fbsd5 it cannot find the camera. When I try to add a camera manually, it can correctly detect the camera as Canon Digital IXUS 400 Universal Serial Bus (usb:) but then it cannot initialize it. Same happens on all 4 usb connectors. Since the messages on connecting/disconnecting are virtually the same in different versions of FreeBSD, and versions of gtkam are really close, I think the problem should be somewhere in the usb driver in FreeBSD 5. Does anybody have any clue to this? Can I give more useful information? Best regards, V.Chukharev -------------------------------- The system I would like to use the camera with (and it fails to work): $ uname -a FreeBSD chu.h33.erkki.ton.tut.fi 5.4-STABLE FreeBSD 5.4-STABLE #20: Sun May 15 16:16:12 EEST 2005 root@chu.h33.erkki.ton.tut.fi:/usr/obj/usr/src/sys/CHU i386 This appears in /etc/log/all.log on connecting/disconnecting the camera: May 21 23:08:41 chu kernel: ugen0: Canon Inc. Canon Digital Camera, rev 1.10/0.01, addr 2 May 21 23:08:42 chu kernel: ugen0: at uhub0 port 2 (addr 2) disconnected May 21 23:08:42 chu kernel: ugen0: detached Full dmesg output on this computer: $ dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #20: Sun May 15 16:16:12 EEST 2005 root@chu.h33.erkki.ton.tut.fi:/usr/obj/usr/src/sys/CHU Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1500MHz (1500.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 527695872 (503 MB) avail memory = 506724352 (483 MB) npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xdc00-0xdc07 mem 0xfeb00000-0xfeb7ffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd480-0xd49f irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd800-0xd81f irq 5 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd880-0xd89f irq 4 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <network> at device 4.0 (no driver attached) cbb0: <RF5C475 PCI-CardBus Bridge> at device 5.0 on pci1 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <Ricoh R5C551> mem 0xfe8ff000-0xfe8ff7ff irq 11 at device 5.1 on pci1 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:18:13:e4 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:18:13:e4 fwe0: Ethernet address: 02:e0:18:18:13:e4 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port 0xcc00-0xcc3f mem 0xfe8fe000-0xfe8fefff irq 11 at device 8.0 on pci1 miibus0: <MII bus> on fxp0 inphy0: <i82562EM 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:0e:a6:8e:a9:ae isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1500059068 Hz quality 800 Timecounters tick every 10.000 msec ad0: 57231MB <IC25N060ATMR04-0/MOBOAD4A> [116280/16/63] at ata0-master UDMA100 acd0: DVDR <MATSHITADVD-RAM UJ-810/C100> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a pcm0: <Intel ICH4 (82801DB)> port 0xe100-0xe13f,0xe000-0xe0ff at device 31.5 on pci0 pcm0: <SigmaTel STAC9750/51 AC97 Codec> ugen0: Canon Inc. Canon Digital Camera, rev 1.10/0.01, addr 2 ugen0: at uhub0 port 2 (addr 2) disconnected ugen0: detached cpu0: Cx states changed cpu0: Cx states changed ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. The versions of the gtkam program and its dependencies: $ pkg_tree gtkam gtkam-gnome-0.1.12_4 |\__ pkgconfig-0.17.2 |\__ expat-1.95.8_1 |\__ xorg-fonts-encodings-6.8.2 |\__ xmlcatmgr-2.2 |\__ jpeg-6b_3 |\__ freetype2-2.1.9 |\__ fontconfig-2.2.3,1 |\__ sdocbook-xml-4.1.2.5_2 |\__ docbook-sk-4.1.2_3 |\__ libiconv-1.9.2_1 |\__ python-2.4.1_1 |\__ py24-numeric-23.7 |\__ xorg-libraries-6.8.2 |\__ samba-libsmbclient-3.0.14a_2 |\__ png-1.2.8_2 |\__ libxml2-2.6.19 |\__ perl-5.8.6_2 |\__ bitstream-vera-1.10_1 |\__ startup-notification-0.8_1 |\__ openldap-client-2.2.26 |\__ nspr-4.4.1_1 |\__ nss-3.9.2 |\__ gettext-0.14.4 |\__ popt-1.7 |\__ glib-2.6.4 |\__ p5-XML-Parser-2.34_1 |\__ hicolor-icon-theme-0.5 |\__ libusb-0.1.10a |\__ shared-mime-info-0.16_1 |\__ libXft-2.1.6_1 |\__ tiff-3.7.2 |\__ libijs-0.35 |\__ libgpg-error-1.0_1 |\__ xorg-fonts-truetype-6.8.2 |\__ libgcrypt-1.2.1_1 |\__ libwmf-0.2.8.3 |\__ linc-1.0.3_3 |\__ fam-2.6.9_6 |\__ libexif-0.6.12_1 |\__ libaudiofile-0.2.6 |\__ gnomehier-2.0_6 |\__ libxslt-1.1.14 |\__ gnutls-1.0.24_1 |\__ pango-1.8.1 |\__ libgsf-1.11.1 |\__ docbook-xml-4.2_1 |\__ atk-1.9.1 |\__ esound-0.2.35_2 |\__ libart_lgpl2-2.3.17 |\__ gtk-2.6.7 |\__ libcroco-0.6.0_1 |\__ lcms-1.14,1 |\__ libmng-1.0.8 |\__ libgphoto2-2.1.5_1 |\__ intltool-0.33 |\__ libIDL-0.8.5_1 |\__ libglade2-2.5.1_2 |\__ ORBit2-2.12.2 |\__ libsoup-2.2.3 |\__ docbook-xsl-1.68.1 |\__ libwnck-2.10.0 |\__ py24-gtk-2.6.2 |\__ libgnomecanvas-2.10.1 |\__ scrollkeeper-0.3.14_1,1 |\__ cdparanoia-3.9.8_7 |\__ gnomemimedata-2.4.2 |\__ gail-1.8.4 |\__ libexif-gtk-0.3.4_3 |\__ gimp-print-4.2.7_1 |\__ libbonobo-2.8.1_1 |\__ gtk-engines2-2.6.3_3 |\__ gconf2-2.10.0 |\__ gnomevfs2-2.10.1 |\__ gnome-icon-theme-2.10.1_1 |\__ librsvg2-2.9.5_2 |\__ gnomekeyring-0.4.2_1 |\__ libgnome-2.10.0_1 |\__ libbonoboui-2.8.1_2 |\__ libgnomeui-2.10.0_1 |\__ evolution-data-server-1.2.2_1 |\__ gnomedesktop-2.10.1 |\__ desktop-file-utils-0.10_2 |\__ gnome-menus-2.10.1_1 |\__ gnomepanel-2.10.1_1 |\__ libgtkhtml-2.6.3_1 |\__ aalib-1.4.r5_1 \__ gimp-gnome-2.2.6,1 ----------------------------------------------- For comparison, some info from FreeBSD 4, where gtkam works. $ uname -a FreeBSD svak.h33.erkki.ton.tut.fi 4.10-STABLE FreeBSD 4.10-STABLE #0: Sun Aug 22 13:27:05 EEST 2004 root@svak.h33.erkki.ton.tut.fi:/usr/obj/usr/src/sys/SVAK i386 This appears in /etc/log/all.log on connecting/disconnecting the camera: May 21 23:14:49 svak /kernel: ugen0: Canon Inc. Canon Digital Camera, rev 1.10/0.01, addr 2 May 21 23:14:54 svak /kernel: ugen0: at uhub0 port 3 (addr 2) disconnected May 21 23:14:54 svak /kernel: ugen0: detached $ pkg_tree gtkam gtkam-gnome-0.1.12 |\__ xmlcatmgr-2.1 |\__ jpeg-6b_3 |\__ freetype2-2.1.7_3 |\__ expat-1.95.8 |\__ sdocbook-xml-4.1.2.5_2 |\__ docbook-xml-4.2_1 |\__ libiconv-1.9.2_1 |\__ python-2.3.4_2 |\__ py23-numeric-23.1 |\__ imake-4.4.0 |\__ samba-libsmbclient-3.0.7_1 |\__ png-1.2.6 |\__ pkgconfig-0.15.0_1 |\__ fontconfig-2.2.3,1 |\__ gettext-0.13.1_1 |\__ p5-XML-Parser-2.34_1 |\__ glib-2.4.6_1 |\__ libxml2-2.6.13 |\__ XFree86-libraries-4.4.0_1 |\__ gnomehier-1.0_19 |\__ libusb-0.1.7_1 |\__ popt-1.7 |\__ tiff-3.6.1_2 |\__ libijs-0.35 |\__ libxslt-1.1.10 |\__ libXft-2.1.6 |\__ XFree86-fontEncodings-4.4.0 |\__ shared-mime-info-0.15 |\__ libgnugetopt-1.2 |\__ docbook-xsl-1.65.1 |\__ linc-1.0.3_2 |\__ docbook-sk-4.1.2_3 |\__ startup-notification-0.7 |\__ libwmf-0.2.8.3 |\__ XFree86-fontScalable-4.4.0_1 |\__ libexif-0.5.12_2 |\__ fam-2.6.9_6 |\__ libgphoto2-2.1.4_3 |\__ libaudiofile-0.2.6 |\__ libart_lgpl2-2.3.16 |\__ pango-1.4.1 |\__ libgsf-1.10.1 |\__ lcms-1.13,1 |\__ libmng-1.0.8 |\__ atk-1.6.1 |\__ hicolor-icon-theme-0.5 |\__ intltool-0.31.2 |\__ gtk-2.4.9_1 |\__ libglade2-2.4.0 |\__ gsfonts-8.11_2 |\__ cdparanoia-3.9.8_7 |\__ libIDL-0.8.4 |\__ gtk-engines2-2.2.0_4 |\__ py23-gtk-2.2.0_3 |\__ libgnomecanvas-2.6.1.1 |\__ gail-1.6.6 |\__ libwnck-2.6.2.1_1 |\__ ORBit2-2.10.4 |\__ cups-base-1.1.20.0 |\__ libexif-gtk-0.3.3_2 |\__ libcroco-0.5.1 |\__ gnomemimedata-2.4.1_2 |\__ librsvg2-2.6.5_1 |\__ libbonobo-2.6.2 |\__ gnome-icon-theme-1.2.3 |\__ gconf2-2.6.4 |\__ gnomevfs2-2.6.2_1 |\__ ghostscript-gnu-7.07_11 |\__ esound-0.2.35_1 |\__ scrollkeeper-0.3.14_1,1 |\__ libgnome-2.6.1.2 |\__ libbonoboui-2.6.1 |\__ gnomekeyring-0.2.1_1 |\__ cups-pstoraster-7.07_1 |\__ libgnomeui-2.6.1.1 |\__ gnomedesktop-2.6.2 |\__ gimp-print-4.2.7 |\__ aalib-1.4.r5_1 |\__ gnomepanel-2.6.2_1 |\__ libgtkhtml-2.6.2 \__ gimp-gnome-2.0.4,1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.sq6k8ymj1taxl4>