Date: Sun, 20 Jan 2008 16:45:05 -0500 From: Lanny Baron <lnb@freebsdsystems.com> To: "Peter J. Blowers" <PBlowers@safarivideonetworks.com> Cc: freebsd-hardware@freebsd.org Subject: Re: Dell Poweredge 2950 w/ PERC 6 from FreeBSD 6.3-RC2 -> FreeBSD 6.2-RELEASE? Message-ID: <4793C0E1.1080408@freebsdsystems.com> In-Reply-To: <535B15A1-D156-486B-9FEE-327B1ACE711D@safarivideonetworks.com> References: <535B15A1-D156-486B-9FEE-327B1ACE711D@safarivideonetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Peter,
I looked at your email and thought it was strange the the dell server
wouldn't see mfi. I thought I would give one of our servers a whirl and
try both 6.2-RELEASE (amd64) and 6.3-RELEASE (amd64). I used amd64 for
this install because the server has 16GB of memory. Perhaps you can send
a dmesg so we can compare? The dmesg you see below on both installs was
done out of the box without anything done to kernel or any other files
on the same 2680 server.
First 6.2-RELEASE (AMD64):
proserv2680# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007
root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <INTEL>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2339.15-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 18790481920 (17920 MB)
avail memory = 16599867392 (15830 MB)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <INTEL S5000PAL> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
cpu4: <ACPI CPU> on acpi0
acpi_throttle4: <ACPI CPU Throttling> on cpu4
acpi_throttle4: failed to attach P_CNT
device_attach: acpi_throttle4 attach returned 6
cpu5: <ACPI CPU> on acpi0
acpi_throttle5: <ACPI CPU Throttling> on cpu5
acpi_throttle5: failed to attach P_CNT
device_attach: acpi_throttle5 attach returned 6
cpu6: <ACPI CPU> on acpi0
acpi_throttle6: <ACPI CPU Throttling> on cpu6
acpi_throttle6: failed to attach P_CNT
device_attach: acpi_throttle6 attach returned 6
cpu7: <ACPI CPU> on acpi0
acpi_throttle7: <ACPI CPU Throttling> on cpu7
acpi_throttle7: failed to attach P_CNT
device_attach: acpi_throttle7 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
mfi0: <LSI MegaSAS 1064R> mem
0xb8b00000-0xb8b0ffff,0xb8900000-0xb891ffff irq 18 at device 14.0 on pci4
mfi0: 433 (254162137s/0x0020/0) - Shutdown command received from host
mfi0: 434 (4278190080s/0x0020/0) - PCI 0x041000 0x04411 0x048086
0x043501: Firmware initialization started (PCI ID 0411/1000/3501/8086)
mfi0: 435 (4278190080s/0x0020/0) - Type 18: Firmware version 1.12.00-0310
mfi0: 436 (4278190090s/0x0008/0) - Battery started charging
mfi0: 437 (4278190090s/0x0008/0) - Battery temperature is normal
mfi0: 438 (4278190090s/0x0008/0) - Battery Present
mfi0: 439 (4278190091s/0x0020/0) - Type 18: Board Revision
mfi0: 440 (4278190139s/0x0002/1) - PD 00(e0/s0) err 3: Encl PD 00 reset
(Type 03)
mfi0: 441 (4278190143s/0x0004/0) - PD 13(e1/s255) event: Enclosure (SES)
discovered on PD 0d(c None/p1)
mfi0: 442 (4278190180s/0x0002/1) - PD 13(e13/s255) err 3: Encl PD 0d
Path 50015074f652e000 reset (Type 03)
mfi0: 443 (4278190197s/0x0002/0) - PD 13(e13/s255) event: Inserted: Encl
PD 0d
mfi0: 444 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0d(c None/p1)
Info: enclPd=0d, scsiType=d, portMap=09,
sasAddr=50015074f652e000,0000000000000000
mfi0: 445 (4278190197s/0x0002/0) - PD 08(e13/s0) event: Inserted: PD
08(e0x0d/s0)
mfi0: 446 (4278190197s/0x0002/0) - Type 29: Inserted: PD 08(e0x0d/s0)
Info: enclPd=0d, scsiType=0, portMap=00,
sasAddr=5000c50007b4a225,0000000000000000
mfi0: 447 (4278190197s/0x0002/0) - PD 09(e13/s1) event: Inserted: PD
09(e0x0d/s1)
mfi0: 448 (4278190197s/0x0002/0) - Type 29: Inserted: PD 09(e0x0d/s1)
Info: enclPd=0d, scsiType=0, portMap=01,
sasAddr=5000c50007b4b415,0000000000000000
mfi0: 449 (4278190197s/0x0002/0) - PD 10(e13/s4) event: Inserted: PD
0a(e0x0d/s4)
mfi0: 450 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0a(e0x0d/s4)
Info: enclPd=0d, scsiType=0, portMap=04,
sasAddr=5000c50007bd5aad,0000000000000000
mfi0: 451 (4278190197s/0x0002/0) - PD 11(e13/s2) event: Inserted: PD
0b(e0x0d/s2)
mfi0: 452 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0b(e0x0d/s2)
Info: enclPd=0d, scsiType=0, portMap=02,
sasAddr=5000c50007b4b459,0000000000000000
mfi0: 453 (4278190197s/0x0002/0) - PD 12(e13/s3) event: Inserted: PD
0c(e0x0d/s3)
mfi0: 454 (4278190197s/0x0002/0) - Type 29: Inserted: PD 0c(e0x0d/s3)
Info: enclPd=0d, scsiType=0, portMap=03,
sasAddr=5000c50007b4b5dd,0000000000000000
mfi0: 455 (4278190197s/0x0042/0) - Type 22: Global Hot Spare created on
PD 0a(e0x0d/s4) (global)
mfi0: 456 (4278190197s/0x0002/0) - PD 10(e13/s4) state prior 0 new 2:
State change on PD 0a(e0x0d/s4) from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: 457 (4278190197s/0x0008/1) - BBU disabled; changing WB virtual
disks to WT
mfi0: 458 (254162289s/0x0020/0) - Adapter ticks 254162289 elapsed 118s:
Time established as 01/20/08 16:38:09; (118 seconds since power on)
pcib5: <PCI-PCI bridge> at device 0.2 on pci3
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci2
pci7: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at
device 0.0 on pci7
em0: Ethernet address: 00:15:17:4f:65:2e
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at
device 0.1 on pci7
em1: Ethernet address: 00:15:17:4f:65:2f
pcib8: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci8: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 3.0 on pci0
pci9: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci12: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci13: <ACPI PCI bus> on pcib13
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x3080-0x309f irq 23 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3060-0x307f irq 22 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 23 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3020-0x303f irq 22 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb8d00000-0xb8d003ff irq
23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci14: <ACPI PCI bus> on pcib14
pci14: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af irq 20 at device 31.1
on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDRW <Optiarc CD-RW CRX880A/KX10> at ata0-slave UDMA33
mfid0: <MFI Logical Disk> on mfi0
mfid0: 278472MB (570310656 sectors) RAID volume '' is optimal
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
Trying to mount root from ufs:/dev/mfid0s1a
mfi0: 459 (254162401s/0x0008/0) - Battery relearn pending: Battery is
under charge
Below is 6.3-RELEASE:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE #0: Wed Jan 16 01:43:02 UTC 2008
root@palmer.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <INTEL>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2339.15-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 18790481920 (17920 MB)
avail memory = 16598941696 (15829 MB)
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 01:41:13)
acpi0: <INTEL S5000PAL> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
cpu4: <ACPI CPU> on acpi0
acpi_throttle4: <ACPI CPU Throttling> on cpu4
acpi_throttle4: failed to attach P_CNT
device_attach: acpi_throttle4 attach returned 6
cpu5: <ACPI CPU> on acpi0
acpi_throttle5: <ACPI CPU Throttling> on cpu5
acpi_throttle5: failed to attach P_CNT
device_attach: acpi_throttle5 attach returned 6
cpu6: <ACPI CPU> on acpi0
acpi_throttle6: <ACPI CPU Throttling> on cpu6
acpi_throttle6: failed to attach P_CNT
device_attach: acpi_throttle6 attach returned 6
cpu7: <ACPI CPU> on acpi0
acpi_throttle7: <ACPI CPU Throttling> on cpu7
acpi_throttle7: failed to attach P_CNT
device_attach: acpi_throttle7 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
mfi0: <LSI MegaSAS 1064R> mem
0xb8b00000-0xb8b0ffff,0xb8900000-0xb891ffff irq 18 at device 14.0 on pci4
mfi0: Megaraid SAS driver Ver 2.00
mfi0: 379 (254160554s/0x0020/0) - Shutdown command received from host
mfi0: 380 (4278190080s/0x0020/0) - PCI 0x041000 0x04411 0x048086
0x043501: Firmware initialization started (PCI ID 0411/1000/3501/8086)
mfi0: 381 (4278190080s/0x0020/0) - Type 18: Firmware version 1.12.00-0310
mfi0: 382 (4278190080s/0x0020/0) - PCI 0x041000 0x04411 0x048086
0x043501: Firmware initialization started (PCI ID 0411/1000/3501/8086)
mfi0: 383 (4278190080s/0x0020/0) - Type 18: Firmware version 1.12.00-0310
mfi0: 384 (4278190094s/0x0008/0) - Battery started charging
mfi0: 385 (4278190094s/0x0008/0) - Battery temperature is normal
mfi0: 386 (4278190094s/0x0008/0) - Battery Present
mfi0: 387 (4278190094s/0x0020/0) - Type 18: Board Revision
mfi0: 388 (4278190141s/0x0002/1) - PD 00(e0/s0) err 3: Encl PD 00 reset
(Type 03)
mfi0: 389 (4278190145s/0x0004/0) - PD 13(e1/s255) event: Enclosure (SES)
discovered on PD 0d(c None/p1)
mfi0: 390 (4278190145s/0x0002/0) - PD 13(e13/s255) event: Inserted: Encl
PD 0d
mfi0: 391 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0d(c None/p1)
Info: enclPd=0d, scsiType=d, portMap=09,
sasAddr=50015074f652e000,0000000000000000
mfi0: 392 (4278190145s/0x0002/0) - PD 08(e13/s0) event: Inserted: PD
08(e0x0d/s0)
mfi0: 393 (4278190145s/0x0002/0) - Type 29: Inserted: PD 08(e0x0d/s0)
Info: enclPd=0d, scsiType=0, portMap=00,
sasAddr=5000c50007b4a225,0000000000000000
mfi0: 394 (4278190145s/0x0002/0) - PD 09(e13/s1) event: Inserted: PD
09(e0x0d/s1)
mfi0: 395 (4278190145s/0x0002/0) - Type 29: Inserted: PD 09(e0x0d/s1)
Info: enclPd=0d, scsiType=0, portMap=01,
sasAddr=5000c50007b4b415,0000000000000000
mfi0: 396 (4278190145s/0x0002/0) - PD 10(e13/s4) event: Inserted: PD
0a(e0x0d/s4)
mfi0: 397 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0a(e0x0d/s4)
Info: enclPd=0d, scsiType=0, portMap=04,
sasAddr=5000c50007bd5aad,0000000000000000
mfi0: 398 (4278190145s/0x0002/0) - PD 11(e13/s2) event: Inserted: PD
0b(e0x0d/s2)
mfi0: 399 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0b(e0x0d/s2)
Info: enclPd=0d, scsiType=0, portMap=02,
sasAddr=5000c50007b4b459,0000000000000000
mfi0: 400 (4278190145s/0x0002/0) - PD 12(e13/s3) event: Inserted: PD
0c(e0x0d/s3)
mfi0: 401 (4278190145s/0x0002/0) - Type 29: Inserted: PD 0c(e0x0d/s3)
Info: enclPd=0d, scsiType=0, portMap=03,
sasAddr=5000c50007b4b5dd,0000000000000000
mfi0: 402 (4278190145s/0x0042/0) - Type 22: Global Hot Spare created on
PD 0a(e0x0d/s4) (global)
mfi0: 403 (4278190145s/0x0002/0) - PD 10(e13/s4) state prior 0 new 2:
State change on PD 0a(e0x0d/s4) from UNCONFIGURED_GOOD(0) to HOT SPARE(2)
mfi0: 404 (4278190146s/0x0008/1) - BBU disabled; changing WB virtual
disks to WT
mfi0: 405 (254160660s/0x0020/0) - Adapter ticks 254160660 elapsed 66s:
Time established as 01/20/08 16:11:00; (66 seconds since power on)
pcib5: <PCI-PCI bridge> at device 0.2 on pci3
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci2
pci7: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port
0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at
device 0.0 on pci7
em0: Ethernet address: 00:15:17:4f:65:2e
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port
0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at
device 0.1 on pci7
em1: Ethernet address: 00:15:17:4f:65:2f
pcib8: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci8: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 3.0 on pci0
pci9: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci12: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci13: <ACPI PCI bus> on pcib13
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x3080-0x309f irq 23 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3060-0x307f irq 22 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 23 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3020-0x303f irq 22 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb8d00000-0xb8d003ff irq
23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci14: <ACPI PCI bus> on pcib14
pci14: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af irq 20 at device 31.1
on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: CDRW <Optiarc CD-RW CRX880A/KX10> at ata0-slave UDMA33
mfid0: <MFI Logical Disk> on mfi0
mfid0: 278472MB (570310656 sectors) RAID volume '' is optimal
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
Trying to mount root from ufs:/dev/mfid0s1a
Regards,
___________________________________________________
Lanny Baron
FreeBSD Systems / Freedom Technologies Corporation
Toll Free: 1.877.963.1900
High Performance Servers and RAID Storage Systems
http://www.FreeBSDsystems.COM
___________________________________________________
Peter J. Blowers wrote:
> FreeBSD 6.3 will boot on our PERC 6 machine, but 6.2 won't recognize the
> mfi device. Just backporting the mfi.ko appears to be insufficient.
> Has anyone done this? Any hints as to what else might be needed?
>
> Thanks,
> Peter J. Blowers
>
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4793C0E1.1080408>