Date: Fri, 25 Nov 2005 20:36:34 GMT From: Aaron Wallace <awallac3@uiuc.edu> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/89550: [amd64] sym0: VTOBUS failed (6.0 Release) Message-ID: <200511252036.jAPKaYKL005605@www.freebsd.org> Resent-Message-ID: <200511252040.jAPKe3MG033540@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 89550
>Category: amd64
>Synopsis: [amd64] sym0: VTOBUS failed (6.0 Release)
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Nov 25 20:40:02 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator: Aaron Wallace
>Release: 6.0 Release
>Organization:
n/a
>Environment:
>Description:
Ever since I switched to amd64, I have been having problems with my symbios / lsi logic 21010 scsi card. I tried it initially on an nforce2 chipset, and was getting this error message:
panic: sym0 : VTOBUS FAILED!
About a year ago someone was helping address the problem, and I thought that a patch he had made (6.0-current at the time) had corrected the problem. I think maybe this was just a matter of luck though, because now the problem seems to have resurfaced, this time on an nforce4 chipset.
dmesg output follows:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005
root@rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2120.03-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1025216512 (977 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
pci_link0: <ACPI PCI Link LNK1> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 5 on acpi0
pci_link3: <ACPI PCI Link LNK4> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 10 on acpi0
pci_link6: <ACPI PCI Link LUBB> on acpi0
pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0
pci_link8: <ACPI PCI Link LACI> irq 11 on acpi0
pci_link9: <ACPI PCI Link LMCI> on acpi0
pci_link10: <ACPI PCI Link LSMB> irq 5 on acpi0
pci_link11: <ACPI PCI Link LUB2> irq 11 on acpi0
pci_link12: <ACPI PCI Link LIDE> on acpi0
pci_link13: <ACPI PCI Link LSID> on acpi0
pci_link14: <ACPI PCI Link LFID> on acpi0
pci_link15: <ACPI PCI Link LPCA> on acpi0
pci_link16: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link17: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link18: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link19: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link29: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link30: <ACPI PCI Link APSJ> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCP> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link26: BIOS IRQ 5 for -2145774616.1.INTA is invalid
pci_link21: BIOS IRQ 10 for -2145774616.2.INTA is invalid
pci_link27: BIOS IRQ 11 for -2145774616.2.INTB is invalid
pci_link23: BIOS IRQ 5 for -2145774616.10.INTA is invalid
pci_link24: BIOS IRQ 11 for -2145774616.4.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebfe000-0xfebfe0ff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci_link18: BIOS IRQ 21 for 0.10.INTA is invalid
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, audio> at device 7.0 (no driver attached)
pci1: <input device> at device 7.1 (no driver attached)
sym0: <1010-33> port 0xc400-0xc4ff mem 0xfeaff000-0xfeaff3ff,0xfeafc000-0xfeafdfff irq 16 at device 8.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCAN AT BOOT disabled for targets 1 2 4 5 8 9 10 11 12 13 14 15.
sym0: SCAN FOR LUNS disabled for targets 0 3 6.
sym0: [GIANT-LOCKED]
sym1: <1010-33> port 0xc000-0xc0ff mem 0xfeafe000-0xfeafe3ff,0xfeafa000-0xfeafbfff irq 17 at device 8.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: SCAN AT BOOT disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
sym1: [GIANT-LOCKED]
sym2: <810a> port 0xbc00-0xbcff mem 0xfe9ff000-0xfe9ff0ff irq 18 at device 10.0 on pci1
sym2: No NVRAM, ID 7, Fast-10, SE, parity checking
sym2: [GIANT-LOCKED]
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xdc00-0xdc07 mem 0xfebfb000-0xfebfbfff irq 21 at device 10.0 on pci0
nve0: Ethernet address 00:50:70:56:4b:68
miibus0: <MII bus> on nve0
ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:50:70:56:4b:68
nve0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <display, VGA> at device 0.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff,0xd4000-0xd57ff,0xd6000-0xd9fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
umass0: Generic USB Storage Device, rev 1.10/30.0a, addr 3
Timecounter "TSC" frequency 2120029086 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
acd0: DVDR <PIONEER DVD-RW DVR-106D/1.05> at ata0-slave UDMA33
(probe32:sym2:0:2:0): phase change 6-7 6@3db89198 resid=4.
pass4 at sym2 bus 0 target 2 lun 0
pass4: <HP C5110A 3701> Fixed Processor SCSI-2 device
pass4: 3.300MB/s transfers
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BF03665223 B014> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit)
da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C)
da1 at sym0 bus 0 target 3 lun 0
da1: <QUANTUM ATLAS10K2-TY184L DDD6> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit)
da1: 17510MB (35860910 512 byte sectors: 255H 63S/T 2232C)
da2 at sym0 bus 0 target 6 lun 0
da2: <IBM IC35L036UWDY10-0 S29A> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit)
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
cd0 at sym1 bus 0 target 0 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 0
da3: <CBOX3 USB Storage-SMC 300A> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim0 bus 0 target 0 lun 1
da4: <CBOX3 USB Storage-CFC 300A> Removable Direct Access SCSI-0 device
da4: 1.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da5 at umass-sim0 bus 0 target 0 lun 2
da5: <CBOX3 USB Storage-MMC 300A> Removable Direct Access SCSI-0 device
da5: 1.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
da6 at umass-sim0 bus 0 target 0 lun 3
da6: <CBOX3 USB Storage-MSC 300A> Removable Direct Access SCSI-0 device
da6: 1.000MB/s transfers
da6: Attempt to query device size failed: NOT READY, Medium not present
(da3:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:0): SCSI Status: Check Condition
(da3:umass-sim0:0:0:0): NOT READY asc:3a,0
(da3:umass-sim0:0:0:0): Medium not present
(da3:umass-sim0:0:0:0): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:0): SCSI Status: Check Condition
(da3:umass-sim0:0:0:0): NOT READY asc:3a,0
(da3:umass-sim0:0:0:0): Medium not present
(da3:umass-sim0:0:0:0): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:0): SCSI Status: Check Condition
(da3:umass-sim0:0:0:0): NOT READY asc:3a,0
(da3:umass-sim0:0:0:0): Medium not present
(da3:umass-sim0:0:0:0): Unretryable error
Opened disk da3 -> 6
(da4:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:1): SCSI Status: Check Condition
(da4:umass-sim0:0:0:1): NOT READY asc:3a,0
(da4:umass-sim0:0:0:1): Medium not present
(da4:umass-sim0:0:0:1): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:1): SCSI Status: Check Condition
(da4:umass-sim0:0:0:1): NOT READY asc:3a,0
(da4:umass-sim0:0:0:1): Medium not present
(da4:umass-sim0:0:0:1): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:1): SCSI Status: Check Condition
(da4:umass-sim0:0:0:1): NOT READY asc:3a,0
(da4:umass-sim0:0:0:1): Medium not present
(da4:umass-sim0:0:0:1): Unretryable error
Opened disk da4 -> 6
(da5:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:2): SCSI Status: Check Condition
(da5:umass-sim0:0:0:2): NOT READY asc:3a,0
(da5:umass-sim0:0:0:2): Medium not present
(da5:umass-sim0:0:0:2): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:2): SCSI Status: Check Condition
(da5:umass-sim0:0:0:2): NOT READY asc:3a,0
(da5:umass-sim0:0:0:2): Medium not present
(da5:umass-sim0:0:0:2): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:2): SCSI Status: Check Condition
(da5:umass-sim0:0:0:2): NOT READY asc:3a,0
(da5:umass-sim0:0:0:2): Medium not present
(da5:umass-sim0:0:0:2): Unretryable error
Opened disk da5 -> 6
(da6:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da6:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da6:umass-sim0:0:0:3): SCSI Status: Check Condition
(da6:umass-sim0:0:0:3): NOT READY asc:3a,0
(da6:umass-sim0:0:0:3): Medium not present
(da6:umass-sim0:0:0:3): Unretryable error
Opened disk da6 -> 6
(da6:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da6:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da6:umass-sim0:0:0:3): SCSI Status: Check Condition
(da6:umass-sim0:0:0:3): NOT READY asc:3a,0
(da6:umass-sim0:0:0:3): Medium not present
(da6:umass-sim0:0:0:3): Unretryable error
Opened disk da6 -> 6
(da6:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da6:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da6:umass-sim0:0:0:3): SCSI Status: Check Condition
(da6:umass-sim0:0:0:3): NOT READY asc:3a,0
(da6:umass-sim0:0:0:3): Medium not present
(da6:umass-sim0:0:0:3): Unretryable error
Opened disk da6 -> 6
Trying to mount root from ufs:/dev/da1s1a
Typically, I will either get the message immediately after detection of the sym0 <1010> chip or after acd0 (following scsi bus reset). Of course at either of these points the boot sequence halts and it gives me 15 seconds to reboot.
>How-To-Repeat:
I've tried several combinations of enabling/disabling various motherboard components, but haven't found the exact recipe to repeat the problem consistently. There is clearly some randomness to the problem because I can boot twice in a row with the same settings and it will work one time and not the other. Some factors that seem to have some influence on the problem are the enabling/disabling of the onboard USB in BIOS and perhaps whether or not I enable or disable ACPI on the boot menu (you can see there are some issues with acpi from dmesg, but I can't tell if this is because of the symbios card or not). When I first booted up with the installation cdrom, I had to disable the onboard USB controller to get it to the install menu - this seemed to work consistently. Then once I started booting up from the hard drive, disabling the onboard USB didn't help. I re-enabled onboard USB and tried it again with ACPI disabled from the boot menu and it failed again. I rebooted one
more time with USB enabled and ACPI enabled and it worked - the very same scenario in which it failed immediately after installation.
>Fix:
So far I don't have a fix to the problem, but would be willing to try any suggestions or patches. I should note here also that my nvidia ethernet controller (nve) isn't working at the moment either, so no networking available atm either.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511252036.jAPKaYKL005605>