Date: Tue, 27 May 1997 10:33:49 +0200 (MET DST) From: Josef Belkovics <belkovic@albert.osu.cz> To: freebsd-isp@FreeBSD.ORG Subject: Re: Kernel Configs Message-ID: <Pine.BSF.3.95q.970527100520.377B-100000@albert.osu.cz> In-Reply-To: <Pine.BSF.3.91.970527141341.14689j-100000@panda.hilink.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 27 May 1997, Daniel O'Callaghan wrote: > > On Mon, 26 May 1997, Mark Murdock wrote: > > > Would anyone running their FreeBSD machine as an internet gateway be willing > > to send me their kernel configuration so that I may look over it? I have > > configured mine, but am unsure that I have taken everything into consideration, > > such as maxusers, pseudo-devices, etc. I would like some samples for > > comparison. > > It all depends on what sort of internet gateway you mean. If you mean a > dialup terminal server, that's different from an ethernet<->sync router. > > Tell us what you are after and you'll get more informative feedback. My campus is connected to internet via microwave (?) line. So I don't use in attachment config async/sync ports/cards. With gated I haven't any problem with forwarding of packets. Daily I have 5,000,000 packets on this machine (albert.osu.cz, P5, 66MHz); at least 60% are from stupid novell. I think, that fbsd 2.2.1 has two serious bugs: nfs (?), ipx (forwarding) on net with other frames than only 802_II and, maybe, vm in case of large (> 10Mb) files. Attachment config is "common" for 5 machines (386, 486, P5). ########################################################################### machine "i386" cpu "I586_CPU" ident "JPB" maxusers 10 config kernel root on sd0 options DDB #Kernel debugger options DDB_UNATTENDED #Recover from a panic #ptions DIAGNOSTIC #Extra sanity checking #ptions MATH_EMULATE #Support for x87 emulation options "COMPAT_43" #Compatible with BSD 4.3 options FFS #Berkeley Fast Filesystem options PROCFS #Process filesystem options "NSWAPDEV=1" #Allow this many swap-devices options QUOTA #Enable disk quotas options FAILSAFE #Functionality over speed options "EISA_SLOTS=12" #12 EISA slots are probed options "SCSI_DELAY=5" #Waiting for devices to settle #ptions "SCSI_2_DEF" #Ask a device to run as SCSI-II if can #ptions AHC_TAGENABLE #To enable tagged queueing #ptions AHC_SCBPAGING_ENABLE #To enable SCB paging #ptions AHC_ALLOW_MEMIO #To enable memory mapped i/o options UCONSOLE #Allow users to grab the console options "MAXCONS=4" #Number of virtual consoles options INET #InterNETworking #ptions GATEWAY #InterNETwork gateway #ptions MROUTING #Multicast routing #ptions IPX #IPX/SPX #ptions IPXPRINTFS=0 #IPX/SPX debugging #ptions IPX_ERRPRINTFS=0 #IPX/SPX -"- options "AUTO_EOI_1" #Automatic EOI for the master 8259A options "AUTO_EOI_2" #Automatic EOI for the slave 8259A #ptions DUMMY_NOPS #Disables extra delays for some bus opsoptions "MAXCONS=5" #Number of virtual consoles options SYSVSHM #Enable for share memory options SYSVSEM #Enable for semaphores options SYSVMSG #Enable for messaging controller isa0 controller eisa0 controller pci0 device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr #evice sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #evice sio0 at isa? port "IO_COM1" tty irq 4 vector siointr #evice mse0 at isa? port 0x23c tty irq 5 vector mseintr controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #evice lpt0 at isa? port? tty irq 7 vector lptintr device ep0 at isa? port 0x300 net irq 7 vector epintr #evice ep0 at isa? port 0x300 net irq 10 vector epintr device ep1 at isa? port 0x310 net irq 10 vector epintr device ep2 at isa? port 0x320 net irq 11 vector epintr device ep3 at isa? port 0x330 net irq 12 vector epintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr #ontroller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr #isk wd0 at wdc0 drive 0 #ontroller ahc0 at isa? bio irq ? vector ahcintr controller ahc0 controller scbus0 #evice cd0 device sd0 #ontroller scbus0 at ahc0 bus0 #ontroller scbus1 at ahc0 bus1 #evice cd0 at scbus1 target 0 #isk sd0 at scbus0 target 0 #isk sd1 at scbus0 target 1 pseudo-device loop #Network loopback pseudo-device ether #Generic ethernet pseudo-device gzip #Exec gzipped a.out's pseudo-device log #Kernel syslog interface #seudo-device vn #Vnode driver (turns file into device) #seudo-device sl 1 #Serial line ip #seudo-device ppp 1 #Point-to-point protocol #seudo-device tun 1 #Tunel driver (user process ppp) pseudo-device pty 16 #Pseudo ttys pseudo-device bpfilter 4 #Berkeley packet filter ############################################################################# Josef Belkovics, Ostrava University
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95q.970527100520.377B-100000>