Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 19 Apr 2013 04:36:32 +0000
From:      Sreenivasa Honnur <shonnur@chelsio.com>
To:        "Andrey V. Elsukov" <bu7cher@yandex.ru>
Cc:        "freebsd-hackers@freebsd.org" <freebsd-hackers@freebsd.org>
Subject:   RE: PV6 bind fails with 49 (#define EADDRNOTAVAIL   49 /* Can't assign requested address */)
Message-ID:  <F2BBBB6E0068844991318A316F34795C349637@nice.asicdesigners.com>
In-Reply-To: <516FF9E1.5030303@yandex.ru>
References:  <F2BBBB6E0068844991318A316F34795C349141@nice.asicdesigners.com> <516FF961.5070100@yandex.ru> <516FF9E1.5030303@yandex.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
roundhay# sysctl -a | grep jailed
security.jail.jailed: 0

Oh, of course, I mean, what do you have in td->td_ucred?
[Sreenivas] not sure, I referred to socreate() usage in the kernel source a=
nd used it.

One more observation. Interface "cxgbe1" has a IPv6 interface and an IPv4 i=
nterface, print in ifa_ifwithaddr_internal () shows like below

ifp->xname:cxgbe1 ifp->dname:cxgbe
ifa->ifa_addr->sa_family:18 addr->sa_family:28 =3D=3D> this is for AF_LINK
ifa->ifa_addr->sa_family:2 addr->sa_family:28 =3D=3D> for AF_INET

Though cxgbe1 has a IPv6 interface there is no entry for AF_INET6

Interface "cxgbe3" is not configured with any IP, print in ifa_ifwithaddr_i=
nternal () shows like below
ifp->xname:cxgbe3 ifp->dname:cxgbe
ifa->ifa_addr->sa_family:18 addr->sa_family:28 =3D=3D> for AF_LINK



roundhay# ifconfig cxgbe1
cxgbe1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1=
500
        options=3D6c07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VL=
AN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 00:07:43:11:89:88
        inet6 2010::102 prefixlen 64
        inet6 fe80::207:43ff:fe11:8988%cxgbe1 prefixlen 64 scopeid 0xd
        inet 16.1.1.154 netmask 0xff000000 broadcast 16.255.255.255
        nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet 10Gbase-SR <full-duplex>
        status: active
roundhay# iscsictl -S target=3DALL
Failed to start Target iqn.2004-05.com.chelsio.target1
roundhay# ifconfig cxgbe3
cxgbe3: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=3D6c07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VL=
AN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 00:07:43:11:89:98
        nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet 10Gbase-SR <full-duplex>
        status: no carrier


-----Original Message-----
From: Andrey V. Elsukov [mailto:bu7cher@yandex.ru]=20
Sent: Thursday, April 18, 2013 7:19 PM
To: Sreenivasa Honnur
Cc: freebsd-hackers@freebsd.org
Subject: Re: PV6 bind fails with 49 (#define EADDRNOTAVAIL 49 /* Can't assi=
gn requested address */)

On 18.04.2013 17:47, Andrey V. Elsukov wrote:
> On 18.04.2013 15:37, Sreenivasa Honnur wrote:
>> I have a ipv6 interface(ping6 to a remove ipv6 works) when I try to=20
>> bind to this address through a socket program "sobind" fails with=20
>> "49" as return value. If I give "saddr6.sin6_addr =3D  in6addr_any;"
>> sobind works.
>>
>> Any idea what could be going wrong here?
>=20
> What value has the sysctl variable security.jail.jailed?

Oh, of course, I mean, what do you have in td->td_ucred?

--
WBR, Andrey V. Elsukov



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F2BBBB6E0068844991318A316F34795C349637>