Date: Wed, 18 Jun 2003 20:04:39 -0500 From: John <strgout@unixjunkie.com> To: freebsd-sparc64@freebsd.org Subject: e450 Message-ID: <20030619010438.GA58704@mail.unixjunkie.com>
next in thread | raw e-mail | index | archive | help
here is a OpenBSD dmesg. As you can see OpenBSD is installed on disk3 which used to have FreeBSD 5.1R on it. disk 2 still does. console is keyboard/display Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2003 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.3 (GENERIC) #56: Sat Mar 29 12:48:19 MST 2003 deraadt@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC total memory = 4294967296 avail memory = 3983171584 using 17126 buffers containing 214745088 bytes of memory bootpath: /pci@1f,4000/scsi@3,0/disk@3,0 mainbus0 (root): Sun Enterprise 450 (4 X UltraSPARC-II 296MHz) cpu0 at mainbus0: SUNW,UltraSPARC-II @ 296 MHz, version 0 FPU cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffb4000 SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0 STC0 on /mainbus enabled DVMA map: fe000000 to ffffe000 IOTDB: 1198e000 to 11996000 pci0 at psycho0 ebus0 at pci0 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power at ebus0 addr 724000-724003 ipl 2021 ipl 2034 not configured SUNW,pll at ebus0 addr 504000-504002 not configured uperf0 at ebus0 addr 500000-500007: model SUNW,sc-marvin (0/1) ports 9 sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 34 wskbd0 at comkbd0: console keyboard com0 at ebus0 addr 3062f8-3062ff ipl 42, mouse: ns16550a, 16 byte fifo lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 2018: polled fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 2023 not configured clock0 at ebus0 addr 0-1fff: mk48t59: hostid 80b652a7 flashprom at ebus0 addr 0-fffff, 0-fffff not configured SUNW,envctrl at ebus0 addr 600000-600003 ipl 2024 ipl 2021 not configured hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: address 08:00:20:b6:52:a7 nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1 hme0: using ivec 37e1 for interrupt siop0 at pci0 dev 3 function 0 "Symbios Logic 53c875" rev 0x03 using on-board RAM ivec 7e0 scsibus0 at siop0: 16 targets siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers sd0 at scsibus0 targ 0 lun 0: <IBM, DNES-309170Y, SA30> SCSI3 0/direct fixed sd0: 8748MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sec, 17916240 sec total siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers sd1 at scsibus0 targ 1 lun 0: <IBM, DNES-309170Y, SA30> SCSI3 0/direct fixed sd1: 8748MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sec, 17916240 sec total siop0: target 2 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers sd2 at scsibus0 targ 2 lun 0: <IBM, DNES-309170Y, SA30> SCSI3 0/direct fixed sd2: 8748MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sec, 17916240 sec total siop0: target 3 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers sd3 at scsibus0 targ 3 lun 0: <IBM, DNES-309170Y, SA30> SCSI3 0/direct fixed sd3: 8748MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sec, 17916240 sec total siop1 at pci0 dev 2 function 0 "Symbios Logic 53c875" rev 0x03 using on-board RAM ivec 7e6 scsibus1 at siop1: 16 targets siop1: target 6 now using 8 bit 10.0 MHz 16 REQ/ACK offset xfers cd0 at scsibus1 targ 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> SCSI2 5/cdrom removable vgafb0 at pci0 dev 4 function 0 "3D Labs Permedia 3" rev 0x01: failed to find all ports psycho1 at mainbus0 addr 0xfffc6000 SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 128 STC0 on /mainbus enabled STC1 on /mainbus enabled pci1 at psycho1 timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec and 7ed mc at mainbus0 not configured psycho2 at mainbus0 addr 0xfff5e000 SUNW,psycho: impl 0, version 4: ign 100 bus range 0 to 0; PCI bus 0 STC0 on /mainbus enabled DVMA map: fe000000 to ffffe000 IOTDB: 11c1a000 to 11c22000 pci2 at psycho2 "Sun PCIO Ebus2" rev 0x01 at pci2 dev 2 function 0 not configured hme1 at pci2 dev 2 function 1 "Sun HME" rev 0x01: address 08:00:20:ad:3d:d6 ukphy0 at hme1 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x00601d, model 0x000c, rev. 1 hme1: using ivec 3002 for interrupt psycho3 at mainbus0 addr 0xfff70000 SUNW,psycho: impl 0, version 4: ign 100 bus range 128 to 128; PCI bus 128 STC0 on /mainbus enabled STC1 on /mainbus enabled pci3 at psycho3 psycho4 at mainbus0 addr 0xfff36000 SUNW,psycho: impl 0, version 4: ign 180 bus range 0 to 0; PCI bus 0 STC0 on /mainbus enabled DVMA map: fe000000 to ffffe000 IOTDB: 11cae000 to 11cb6000 pci4 at psycho4 psycho5 at mainbus0 addr 0xfff48000 SUNW,psycho: impl 0, version 4: ign 180 bus range 128 to 128; PCI bus 128 STC0 on /mainbus enabled STC1 on /mainbus enabled pci5 at psycho5 pcons at mainbus0 not configured root on sd3a rootdev=0x730 rrootdev=0x1130 rawdev=0x1132
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030619010438.GA58704>