Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 4 Dec 2015 06:54:46 +0000 (UTC)
From:      Andrew Rybchenko <arybchik@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r291747 - head/sys/dev/sfxge/common
Message-ID:  <201512040654.tB46skXH010721@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: arybchik
Date: Fri Dec  4 06:54:46 2015
New Revision: 291747
URL: https://svnweb.freebsd.org/changeset/base/291747

Log:
  sfxge: [EF10] support RxQ scattering control
  
  If, for example, a VF is configured to use a 1500 byte MTU, but the port
  it is attached to is set to 9000 bytes, overlength frames can be received
  by the VF. As Huntington scatters by default, these overlength packets
  would be scattered across several descriptors, with all except the last
  having the CONT bit set.
  
  To avoid this, disable scatter when creating RXQs if the firmware
  supports doing so, which all recent versions do. Then we only get
  a single descriptor from an overlength frame. This will have the CONT
  bit set to indicate it was truncated, so we can discard it.
  
  Submitted by:   Mark Spender <mspender at solarflare.com>
  Sponsored by:   Solarflare Communications, Inc.
  MFC after:      2 days
  Differential Revision: https://reviews.freebsd.org/D4354

Modified:
  head/sys/dev/sfxge/common/efx.h
  head/sys/dev/sfxge/common/hunt_ev.c
  head/sys/dev/sfxge/common/hunt_nic.c
  head/sys/dev/sfxge/common/hunt_rx.c

Modified: head/sys/dev/sfxge/common/efx.h
==============================================================================
--- head/sys/dev/sfxge/common/efx.h	Fri Dec  4 06:51:37 2015	(r291746)
+++ head/sys/dev/sfxge/common/efx.h	Fri Dec  4 06:54:46 2015	(r291747)
@@ -1174,6 +1174,7 @@ typedef struct efx_nic_cfg_s {
 	boolean_t               enc_hw_tx_insert_vlan_enabled;
 	/* Datapath firmware vadapter/vport/vswitch support */
 	boolean_t		enc_datapath_cap_evb;
+	boolean_t               enc_rx_disable_scatter_supported;
 	/* External port identifier */
 	uint8_t			enc_external_port;
 } efx_nic_cfg_t;

Modified: head/sys/dev/sfxge/common/hunt_ev.c
==============================================================================
--- head/sys/dev/sfxge/common/hunt_ev.c	Fri Dec  4 06:51:37 2015	(r291746)
+++ head/sys/dev/sfxge/common/hunt_ev.c	Fri Dec  4 06:54:46 2015	(r291747)
@@ -528,10 +528,14 @@ hunt_ev_rx(
 
 	if (EFX_QWORD_FIELD(*eqp, ESF_DZ_RX_CONT) != 0) {
 		/*
+		 * This may be part of a scattered frame, or it may be a
+		 * truncated frame if scatter is disabled on this RXQ.
+		 * Overlength frames can be received if e.g. a VF is configured
+		 * for 1500 MTU but connected to a port set to 9000 MTU
+		 * (see bug56567).
 		 * FIXME: There is not yet any driver that supports scatter on
 		 * Huntington.  Scatter support is required for OSX.
 		 */
-		EFSYS_ASSERT(0);
 		flags |= EFX_PKT_CONT;
 	}
 

Modified: head/sys/dev/sfxge/common/hunt_nic.c
==============================================================================
--- head/sys/dev/sfxge/common/hunt_nic.c	Fri Dec  4 06:51:37 2015	(r291746)
+++ head/sys/dev/sfxge/common/hunt_nic.c	Fri Dec  4 06:54:46 2015	(r291747)
@@ -920,6 +920,14 @@ hunt_get_datapath_caps(
 		encp->enc_rx_batching_enabled = B_FALSE;
 	}
 
+	/* Check if the firmware supports disabling scatter on RXQs */
+	if (MCDI_CMD_DWORD_FIELD(&datapath_capabilities,
+			    GET_CAPABILITIES_OUT_RX_DISABLE_SCATTER) == 1) {
+		encp->enc_rx_disable_scatter_supported = B_TRUE;
+	} else {
+		encp->enc_rx_disable_scatter_supported = B_FALSE;
+	}
+
 	return (0);
 
 fail2:

Modified: head/sys/dev/sfxge/common/hunt_rx.c
==============================================================================
--- head/sys/dev/sfxge/common/hunt_rx.c	Fri Dec  4 06:51:37 2015	(r291746)
+++ head/sys/dev/sfxge/common/hunt_rx.c	Fri Dec  4 06:54:46 2015	(r291747)
@@ -46,7 +46,8 @@ efx_mcdi_init_rxq(
 	__in		uint32_t target_evq,
 	__in		uint32_t label,
 	__in		uint32_t instance,
-	__in		efsys_mem_t *esmp)
+	__in		efsys_mem_t *esmp,
+	__in		boolean_t disable_scatter)
 {
 	efx_mcdi_req_t req;
 	uint8_t payload[
@@ -71,12 +72,13 @@ efx_mcdi_init_rxq(
 	MCDI_IN_SET_DWORD(req, INIT_RXQ_IN_TARGET_EVQ, target_evq);
 	MCDI_IN_SET_DWORD(req, INIT_RXQ_IN_LABEL, label);
 	MCDI_IN_SET_DWORD(req, INIT_RXQ_IN_INSTANCE, instance);
-	MCDI_IN_POPULATE_DWORD_5(req, INIT_RXQ_IN_FLAGS,
-				    INIT_RXQ_IN_FLAG_BUFF_MODE, 0,
-				    INIT_RXQ_IN_FLAG_HDR_SPLIT, 0,
-				    INIT_RXQ_IN_FLAG_TIMESTAMP, 0,
-				    INIT_RXQ_IN_CRC_MODE, 0,
-				    INIT_RXQ_IN_FLAG_PREFIX, 1);
+	MCDI_IN_POPULATE_DWORD_6(req, INIT_RXQ_IN_FLAGS,
+			    INIT_RXQ_IN_FLAG_BUFF_MODE, 0,
+			    INIT_RXQ_IN_FLAG_HDR_SPLIT, 0,
+			    INIT_RXQ_IN_FLAG_TIMESTAMP, 0,
+			    INIT_RXQ_IN_CRC_MODE, 0,
+			    INIT_RXQ_IN_FLAG_PREFIX, 1,
+			    INIT_RXQ_IN_FLAG_DISABLE_SCATTER, disable_scatter);
 	MCDI_IN_SET_DWORD(req, INIT_RXQ_IN_OWNER_ID, 0);
 	MCDI_IN_SET_DWORD(req, INIT_RXQ_IN_PORT_ID, EVB_PORT_ID_ASSIGNED);
 
@@ -685,6 +687,7 @@ hunt_rx_qcreate(
 {
 	efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
 	efx_rc_t rc;
+	boolean_t disable_scatter;
 
 	_NOTE(ARGUNUSED(erp))
 
@@ -704,14 +707,21 @@ hunt_rx_qcreate(
 		goto fail2;
 	}
 
+	/* Scatter can only be disabled if the firmware supports doing so */
+	if ((type != EFX_RXQ_TYPE_SCATTER) &&
+	    enp->en_nic_cfg.enc_rx_disable_scatter_supported) {
+		disable_scatter = B_TRUE;
+	} else {
+		disable_scatter = B_FALSE;
+	}
+
 	/*
-	 * FIXME: Siena code handles different queue types (default, header
-	 * split, scatter); we'll need to do something more here later, but
-	 * all that stuff is TBD for now.
+	 * Note: EFX_RXQ_TYPE_SPLIT_HEADER and EFX_RXQ_TYPE_SPLIT_PAYLOAD are
+	 * not supported here.
 	 */
 
 	if ((rc = efx_mcdi_init_rxq(enp, n, eep->ee_index, label, index,
-	    esmp)) != 0)
+	    esmp, disable_scatter)) != 0)
 		goto fail3;
 
 	erp->er_eep = eep;



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201512040654.tB46skXH010721>