Date: Mon, 15 May 2000 23:18:37 -0700 (PDT) From: william.ward@ericsson.com To: freebsd-gnats-submit@FreeBSD.org Subject: i386/18586: ep0: No irq?! reported when using PAO and 3Com Megahertz 589E Message-ID: <20000516061837.41F9137B787@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 18586 >Category: i386 >Synopsis: ep0: No irq?! reported when using PAO and 3Com Megahertz 589E >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon May 15 23:20:01 PDT 2000 >Closed-Date: >Last-Modified: >Originator: William Ward >Release: 4.0 RELEASE >Organization: Ericsson, Inc. >Environment: FreeBSD lappy.exu.ericsson.se 4.0-RELEASE FreeBSD 4.0-RELEASE #4: Mon May 15 22:48:07 CDT 2000 root@lappy.exu.ericsson.se:/usr/src/sys/compile/LAPPY i386 >Description: Hardware: Toshiba Tecra 8000 PCMCIA: 3CXM556 Cellular Modem 3CXE589ET 10 Mbps network interface /etc/pccard.conf: # Sample PCCARD configuration file # # Removing all IRQ conflicts from this file can't be done because of some # IRQ-selfish PC-cards. So if you want to use some of these cards in # your machine, you will be forced to modify their IRQ parameters from # the following list. # # IRQ == 0 means "allocate free IRQ from IRQ pool" # IRQ == 16 means "do not use IRQ (e.g. PIO mode)" # # $FreeBSD: src/etc/pccard.conf.sample,v 1.90 2000/03/11 20:23:34 imp Exp $ # # Send new entries for this file to imp@freebsd.org. He's volunteered # to act as coordinator for this file. # # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 10 3 # Available memory slots memory 0xd4000 96k # 3Com Etherlink III 3CXE589ET card "3Com" "Megahertz 589E" # config 0x1 "ep0" ? config auto "ep0" 10 insert logger -t pccard:$device -s 3Com 3C589E inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s 3Com 3C589E removed remove /sbin/ifconfig $device delete # 3com/USR/Megahertz 3CCM556 card "3Com" "3CXM/3CCM556" config 0x23 "sio2" 3 insert logger -t pccard:$device -s 3Com PCMCIA 56K Modem inserted remove logger -t pccard:$device -s 3Com PCMCIA 56K Modem removed CIS for both slots: Code 128 not found Code 128 not found code Unknown ignored Code 131 not found Code 131 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 56 000: 04 01 33 43 6f 6d 00 33 43 58 4d 2f 33 43 43 4d 010: 35 35 36 00 4d 65 67 61 68 65 72 74 7a 20 35 36 020: 4b 20 43 65 6c 6c 2f 54 65 6c 65 70 68 6f 6e 79 030: 20 4d 6f 64 65 6d 00 ff Version = 4.1, Manuf = [3Com],card vers = [3CXM/3CCM556] Addit. info = [Megahertz 56K Cell/Telephony Modem] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 34 00 PCMCIA ID = 0x101, OEM ID = 0x34 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 02 01 Serial port/modem - POST initialize Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 23 00 03 03 Reg len = 2, config register addr = 0x300, last config = 0x23 Registers: XX------ Tuple #6, code = 0x1b (Configuration entry), length = 16 000: e0 41 99 49 55 3e 3d aa 60 f8 03 07 30 ff ff 28 Config index = 0x20(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Continuous supply current: 3.5 x 100mA Power down supply current: 3.5 x 10mA Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3f8 block length = 0x8 IRQ modes: Level IRQs: 4 5 8 9 10 11 12 13 14 15 Max twin cards = 0 Misc attr: (Audio-BVD2) (Power down supported) Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 21 08 aa 60 f8 02 07 Config index = 0x21 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 22 08 aa 60 e8 03 07 Config index = 0x22 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 23 08 aa 60 e8 02 07 Config index = 0x23 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #10, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 7c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even, Tuple #11, code = 0x22 (Functional EXT), length = 9 000: 01 1f 0f 00 06 00 00 06 00 Modem interface capabilities: Tuple #12, code = 0x22 (Functional EXT), length = 12 000: 02 06 00 3f 1c 03 03 0f 07 00 02 b5 Data modem services available: Tuple #13, code = 0x22 (Functional EXT), length = 8 000: 13 06 00 0f 00 02 00 b5 Tuple #14, code = 0x22 (Functional EXT), length = 8 000: 23 06 00 0f 00 02 00 b5 Tuple #15, code = 0x0 (Null tuple), length = 10 000: 02 01 34 00 2d 00 05 00 00 ff Tuple #16, code = 0x0 (Null tuple), length = 14 000: 31 30 43 42 31 43 37 39 33 33 52 43 00 ff Tuple #17, code = 0x14 (No link), length = 0 Tuple #18, code = 0xff (Terminator), length = 0 Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 43 02 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 150nS, Memory block size = 8Kb, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 89 05 PCMCIA ID = 0x101, OEM ID = 0x589 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x15 (Version 1 info), length = 46 000: 04 01 33 43 6f 6d 00 4d 65 67 61 68 65 72 74 7a 010: 20 35 38 39 45 00 54 50 2f 42 4e 43 20 4c 41 4e 020: 20 50 43 20 43 61 72 64 00 30 30 35 00 ff Version = 4.1, Manuf = [3Com],card vers = [Megahertz 589E] Addit. info = [TP/BNC LAN PC Card],[005] Tuple #6, code = 0x1a (Configuration map), length = 6 000: 02 03 00 00 01 03 Reg len = 3, config register addr = 0x10000, last config = 0x3 Registers: XX------ Tuple #7, code = 0x1b (Configuration entry), length = 20 000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff 80 010: 80 80 80 0f Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 10mA Max current average over 10 ms: 5 x 10mA Power down supply current: 5 x 1mA Wait scale Speed = 7.0 x 100 ns RDY/BSY scale Speed = 7.0 x 100 ns Card decodes 18 address lines, full 8/16 Bit I/O IRQ modes: Level, Pulse IRQs: IOCK 1 4 5 6 8 10 11 12 14 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 03 01 71 55 26 26 54 Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 2 x 100mA Max current average over 10 ms: 2 x 100mA Power down supply current: 5 x 1mA Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3 000: 00 00 ff Tuple #10, code = 0x14 (No link), length = 0 Tuple #11, code = 0x10 (Checksum), length = 5 000: 8f ff 7a 00 00 Checksum from offset -113, length 122, value is 0x0 Tuple #12, code = 0xff (Terminator), length = 243 000: 00 03 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f0: ff ff ff 2 slots found kernel config: # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident LAPPY maxusers 64 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem #options MD_ROOT #MD is a potential root device options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem #options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor #options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extentions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options USER_LDT #allow user-level control of i386 ldt options DDB options SOFTUPDATES # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver #pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management #device smbus # Bus support, required for smb below. #device intpm #device alpm #device smb # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 #device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated ##device xe0 at isa? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" #pseudo-device gif 4 # IPv6 and IPv4 tunneling #pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet # For PnP/PCI sound cards #device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 device pcm0 at isa? irq 5 drq 1 flags 0x0 dmesg output: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #0: Mon May 15 23:56:04 CDT 2000 wardd@lappy.exu.ericsson.se:/usr/src/sys/compile/NEWCARD Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) avail memory = 126361600 (123400K bytes) Preloaded elf kernel "kernel" at 0xc0395000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11 chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0 chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0 pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0 pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0 pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11 fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic0 at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic ident regs: 0x83 0x83 0xff 0xff pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B pcic_attach_card h 0xc09d995c h->dev 0xc09d7580 pccard1: pccard_card_attach Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Uptime: 0s Rebooting... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #4: Mon May 15 22:48:07 CDT 2000 root@lappy.exu.ericsson.se:/usr/src/sys/compile/LAPPY Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 399922960 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) avail memory = 126935040 (123960K bytes) Preloaded elf kernel "kernel.old" at 0xc02fb000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11 chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0 chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0 pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0 pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0 pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11 fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 pcm0: <OPL3-SAx (YMF719)> at port 0x530-0x537,0x538-0x539 irq 5 drq 1 flags 0xc100 on isa0 pccard: card inserted, slot 0 pccard: card inserted, slot 1 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 13481MB <IBM-DCYA-214000> [27390/16/63] at ata0-master using UDMA33 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2102> at ata1-master using WDMA2 Mounting root from ufs:/dev/ad0s1a sio2 at port 0x2e8-0x2ef irq 3 slot 0 on pccard0 sio2: type 16550A ep0: No irq?! Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 12 1 done Uptime: 43m27s The operating system has halted. Please press any key to reboot. Rebooting... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #0: Mon May 15 23:56:04 CDT 2000 wardd@lappy.exu.ericsson.se:/usr/src/sys/compile/NEWCARD Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) avail memory = 126361600 (123400K bytes) Preloaded elf kernel "kernel" at 0xc0395000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11 chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0 chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0 pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0 pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0 pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11 fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic0 at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic ident regs: 0x83 0x83 0xff 0xff pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B pcic_attach_card h 0xc09d9848 h->dev 0xc09d7580 pccard0: pccard_card_attach Fatal trap 12: page fault while in kernel mode fault virtual address = 0x128 fault code = supervisor write, page not present instruction pointer = 0x8:0xc0160d96 stack pointer = 0x10:0xc03a9b08 frame pointer = 0x10:0xc03a9b10 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam Uptime: 0s Rebooting... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #4: Mon May 15 22:48:07 CDT 2000 root@lappy.exu.ericsson.se:/usr/src/sys/compile/LAPPY Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 399923122 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) avail memory = 126935040 (123960K bytes) Preloaded elf kernel "kernel.old" at 0xc02fb000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11 chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0 chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0 pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0 pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0 pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11 fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 pcm0: <OPL3-SAx (YMF719)> at port 0x530-0x537,0x538-0x539 irq 5 drq 1 flags 0xc100 on isa0 pccard: card inserted, slot 0 pccard: card inserted, slot 1 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 13481MB <IBM-DCYA-214000> [27390/16/63] at ata0-master using UDMA33 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2102> at ata1-master using WDMA2 Mounting root from ufs:/dev/ad0s1a fd0c: hard error reading fsbn 0 of 0-3 (No status) sio2 at port 0x2e8-0x2ef irq 3 slot 0 on pccard0 sio2: type 16550A ep0: No irq?! >How-To-Repeat: It might be presumed that the same hardware and software versioning and configuration would produce the same results. >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000516061837.41F9137B787>