Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Mar 2005 12:28:44 -0800
From:      "Loren M. Lang" <lorenl@alzatex.com>
To:        Christopher Kelley <bsd@kelleycows.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Does 802.11b use a lot of resources?
Message-ID:  <20050303202844.GH30896@alzatex.com>
In-Reply-To: <4225EAB7.3020205@kelleycows.com>
References:  <421EB26B.5050608@kelleycows.com> <200503020126.46489.bob89@bobj.org> <20050302101715.GE30896@alzatex.com> <4225EAB7.3020205@kelleycows.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Mar 02, 2005 at 08:32:55AM -0800, Christopher Kelley wrote:
> Loren M. Lang wrote:
> 
> >On Wed, Mar 02, 2005 at 01:26:45AM -0500, Bob Johnson wrote:
> > 
> >
> >>On Friday 25 February 2005 12:06 am, Christopher Kelley wrote:
> >>   
> >>
> >>>Have I tried too hard to squeeze usability out of an old computer?
> >>>
> >>>I have a Pentium-166 that has been a faithful router & firewall (FreeBSD
> >>>5.3 and pf) for a couple years now.  It has no trouble with the 3 to 4
> >>>Mbps I get from my broadband connection, at least not with ethernet.
> >>>
> >>>I wanted wireless, so I could use my laptop around the house.  I
> >>>dutifully read the section in the manual about setting up FreeBSD as an
> >>>access point. I'm using a Netgear MA311 802.11b card (Prism 2.5
> >>>chipset).  And it does work, except it's very slow.  Now I know that I
> >>>can only expect about 50% of the rated speed with wireless, but I
> >>>figured even if I got only 4Mbps, I'd be fine.  But I get less than
> >>>1Mbps.  I've updated the firmware, added a signal booster and hi-gain
> >>>antenna, and I have "excellent" signal strength throughout my house.
> >>>
> >>>So my question is, is there more overhead with wireless than with
> >>>ethernet?  TOP doesn't seem to show that I'm taxing it too hard, idle
> >>>never goes below about 70% with polling enabled (Hz=1000), and never
> >>>below about 80% with polling disabled.  Am I expecting too much out of
> >>>an old Pentium-166?
> >>>
> >>>     
> >>>
> >>My experience is that:
> >>
> >>1) 50% throughput is probably the best you should expect.  I generally 
> >>plan on 3-4 Mbps for an 11 Mbps 802.11b card.
> >>
> >>2) Using 128-bit encryption (WEP) will significantly slow down some 
> >>(many?) cards. The WEP processing is done on the card (I think), and they 
> >>simply don't have hefty processors. If you use 128-bit WEP, try 64-bit 
> >>WEP and see if that speeds things up.  64 bit WEP is adequate to keep out 
> >>casual snoopers, and 128 bit is not adequate to keep out a serious 
> >>attacker, so the difference in security may not be as important as some 
> >>believe.  64-bit WEP is also known as 40-bit, and similarly for 128-bit 
> >>WEP.
> >>   
> >>
> >
> >Actually, what I recommend for home you, if you have the time, is IPSEC.
> >Much more secure than WEP and it's all done on the main cpu so it should
> >slow the wifi down as much.  There's a good article on freebsddiary.org
> >I believe.
> >
> > 
> >
> I found the article on freebsddiary, and I admit I only skimmed it, but 
> I have a mix of FreeBSD and Windows (XP) on my wireless network, and for 
> now I'd like to keep it as simple as possible.

I just wanted to mention that I have IPSEC running with several Win2k
computers and it works great.  The configuration is relatively simple,
the main problem was a couple of tweaks I needed to give to racoon, but
the windows side was even easier.  It's still more complicated than WEP,
but it's more secure and may provide faster data transfer.

> 
> Christopher
> 
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

-- 
I sense much NT in you.
NT leads to Bluescreen.
Bluescreen leads to downtime.
Downtime leads to suffering.
NT is the path to the darkside.
Powerful Unix is.

Public Key: ftp://ftp.tallye.com/pub/lorenl_pubkey.asc
Fingerprint: CEE1 AAE2 F66C 59B5 34CA  C415 6D35 E847 0118 A3D2
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050303202844.GH30896>