Date: Tue, 07 Dec 1999 14:45:28 +0000 From: Michael Chin-Yuan Wu <keichii@mail.utexas.edu> To: freebsd-current@freebsd.org Subject: Cannot mount cd9660 Message-ID: <384D1D88.B2F7F062@mail.utexas.edu>
next in thread | raw e-mail | index | archive | help
Michael Chin-Yuan Wu wrote: > > Hi all, > > I have just made -current last night. > I decided to use the new ata0 driver for the first time. > All the devices detect fine. > But this happens when I try to mount my acd0 and acd1 > acd0 is a 40x sony cdrom and acd1 is a sony 6/4/4 cd-r > > keichii[root]:/usr/home/keichii# mount -t iso9660 /dev/acd0 /cdrom1 > mount: exec mount_iso9660 not found in /sbin, /usr/sbin: No such file or directory > keichii[root]:/usr/home/keichii# > > Same with mount_cd9660. I tried with acd1 and all other *cd* devices > and still same error. > > Then I went to src/sbin and did make all install. > Tested and still same error. No result > > went to each of the mount directories and did make all install > Tested and still same error message. No result. > > Dos partitions and floppy drives mount fine > > What should I do? > > P.S. I did a patch for cd9660 and patch for reading Chinese filenames > [patch is in attachment] > =========uname -a============ > FreeBSD keichii.internal.org 4.0-CURRENT FreeBSD 4.0-CURRENT #0 > 8:09 CST 1999 keichii@keichii.internal.org:/usr/current/src > .ATA i386 > ===============dmesg========= > as attachment > =============kernel========= > as attachment > ============patches for chinese filesystems====== > as attachment > ============================== > > Thank you, > > Michael Wu > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > Copyright (c) 1992-1999 The FreeBSD Project. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 4.0-CURRENT #0: Mon Dec 6 04:48:09 CST 1999 > keichii@keichii.internal.org:/usr/current/src/sys/compile/RHEA.ATA > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 598624067 Hz > CPU: Pentium III/Xeon (598.62-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x673 Stepping = 3 > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> > real memory = 402653184 (393216K bytes) > config> di zp0 > No such device: zp0 > Invalid command or syntax. Type `?' for help. > config> di ze0 > No such device: ze0 > Invalid command or syntax. Type `?' for help. > config> di lnc0 > No such device: lnc0 > Invalid command or syntax. Type `?' for help. > config> di le0 > No such device: le0 > Invalid command or syntax. Type `?' for help. > config> di ie0 > No such device: ie0 > Invalid command or syntax. Type `?' for help. > config> di fe0 > No such device: fe0 > Invalid command or syntax. Type `?' for help. > config> di ex0 > No such device: ex0 > Invalid command or syntax. Type `?' for help. > config> di ep0 > No such device: ep0 > Invalid command or syntax. Type `?' for help. > config> di ed0 > No such device: ed0 > Invalid command or syntax. Type `?' for help. > config> di cs0 > No such device: cs0 > Invalid command or syntax. Type `?' for help. > config> di wt0 > No such device: wt0 > Invalid command or syntax. Type `?' for help. > config> di scd0 > No such device: scd0 > Invalid command or syntax. Type `?' for help. > config> di mcd0 > No such device: mcd0 > Invalid command or syntax. Type `?' for help. > config> di matcdc0 > No such device: matcdc0 > Invalid command or syntax. Type `?' for help. > config> di bt0 > No such device: bt0 > Invalid command or syntax. Type `?' for help. > config> di aha0 > No such device: aha0 > Invalid command or syntax. Type `?' for help. > config> di adv0 > No such device: adv0 > Invalid command or syntax. Type `?' for help. > config> q > avail memory = 386830336 (377764K bytes) > Preloaded elf kernel "kernel" at 0xc0327000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc032709c. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > vga-pci0: <NVidia Riva TNT2 graphics accelerator> irq 11 at device 0.0 on pci1 > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0 > ata-pci0: Busmastering DMA supported > ata0 at 0x01f0 irq 14 on ata-pci0 > ata1 at 0x0170 irq 15 on ata-pci0 > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 9 at device 7.2 on pci0 > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ums0: Logitech product 0xc001, rev 1.00/11.00, addr 2, iclass 3/1 > ums0: 3 buttons and Z dir. > chip1: <Intel 82371AB Power management controller> at device 7.3 on pci0 > xl0: <3Com 3c905C-TX Fast Etherlink XL> irq 11 at device 13.0 on pci0 > xl0: Ethernet address: 00:50:da:1b:fb:1c > miibus0: <MII bus> on xl0 > xlphy0: <3c905C 10/100 internal PHY> on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci0: unknown card (vendor=0x1102, dev=0x0002) at 14.0 irq 10 > pci0: unknown card (vendor=0x1102, dev=0x7002) at 14.1 > pci0: unknown card (vendor=0x14f1, dev=0x1033) at 16.0 irq 9 > pci0: unknown card (vendor=0x109e, dev=0x036e) at 17.0 irq 3 > pci0: unknown card (vendor=0x109e, dev=0x0878) at 17.1 irq 3 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> on isa0 > sc0: VGA <16 virtual consoles, flags=0x200> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio2: not probed (disabled) > sio3: not probed (disabled) > ad0: <WDC AC313600D/J7JOA30K> ATA-4 disk at ata0 as master > ad0: 13042MB (26712000 sectors), 26500 cyls, 16 heads, 63 S/T, 512 B/S > ad0: 16 secs/int, 32 depth queue, UDMA33 > WARNING: WAIT_INTR active=UNKNOWN > ad1: <WDC AC2850F/28.25E40> ATA-? disk at ata0 as slave > ad1: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S > ad1: 16 secs/int, 1 depth queue, PIO > acd0: <CRD-8400B/1.03> CDROM drive at ata1 as master > acd0: read 6875KB/s (6875KB/s), 128KB buffer, UDMA33 > acd0: supported read types: CD-R, CD-RW, CD-DA, packet > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray > acd0: Medium: no/blank disc inside, unlocked, lock protected > acd1: <CD-RW CRX100E/1.0m> CDROM drive at ata1 as slave > acd1: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 1024KB buffer, DMA > acd1: supported read types: CD-R, CD-RW, CD-DA, packet > acd1: supported write types: CD-R, CD-RW, test write > acd1: Audio: play, 256 volume levels > acd1: Mechanism: ejectable tray > acd1: Medium: no/blank disc inside, unlocked > Mounting root from ufs:/dev/wd0s3a > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > Name: chinese_joliet.patch.for_3.2-19990615.gz > chinese_joliet.patch.for_3.2-19990615.gz Type: application/x-gzip > Encoding: base64 > > Name: chinese_vfat-3.0.patch.gz > chinese_vfat-3.0.patch.gz Type: application/x-gzip > Encoding: base64 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?384D1D88.B2F7F062>