Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 19 Nov 2007 15:01:32 +1100
From:      Norberto Meijome <freebsd@meijome.net>
To:        =?ISO-8859-1?Q?S=E9bastien?= LEFEVRE <sebastien@domunix.org>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: KERNEL 7.0 COMPILATION
Message-ID:  <20071119150132.5d31de8b@meijome.net>
In-Reply-To: <20071118153445.uvpqy5zce88o0skg@groupware.domunix.org>
References:  <20071118153445.uvpqy5zce88o0skg@groupware.domunix.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 18 Nov 2007 15:34:45 +0100
S=E9bastien LEFEVRE <sebastien@domunix.org> wrote:

> /usr/src/sys/net/rtsock.c:897: undefined reference to `sctp_addr_change'
> in_proto.o(.data+0xa8): undefined reference to `sctp_input'
> in_proto.o(.data+0xb0): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0xb4): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0xbc): undefined reference to `sctp_init'
> in_proto.o(.data+0xc8): undefined reference to `sctp_drain'
> in_proto.o(.data+0xcc): undefined reference to `sctp_usrreqs'
> in_proto.o(.data+0xdc): undefined reference to `sctp_input'
> in_proto.o(.data+0xe4): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0xe8): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0xfc): undefined reference to `sctp_drain'
> in_proto.o(.data+0x100): undefined reference to `sctp_usrreqs'
> in_proto.o(.data+0x110): undefined reference to `sctp_input'
> in_proto.o(.data+0x118): undefined reference to `sctp_ctlinput'
> in_proto.o(.data+0x11c): undefined reference to `sctp_ctloutput'
> in_proto.o(.data+0x130): undefined reference to `sctp_drain'
> in_proto.o(.data+0x134): undefined reference to `sctp_usrreqs'
> *** Error code 1
>=20
> Stop in /usr/obj/usr/src/sys/GENERIC.
> *** Error code 1
>=20
> Stop in /usr/src.
> *** Error code 1
>=20
> Stop in /usr/src.
>=20
>=20
> Why?

Hi Sebastien,
If you look closely at all the errors, they all refer to SCTP , which is a =
newish protocol. It was added by default to 7.0's tree. I suspect you are u=
sing an old kernel config file, and you don't have that option, and 7's IPF=
W needs it.

look in /usr/src/sys/conf/NOTES  for how it is defined :)

good luck,
B
_________________________
{Beto|Norberto|Numard} Meijome

"I'm not afraid of dying, I just don't want to be there when it happens."
  Woody Allen

I speak for myself, not my employer. Contents may be hot. Slippery when wet=
. Reading disclaimers makes you go blind. Writing them is worse. You have b=
een Warned.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071119150132.5d31de8b>