Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Apr 2015 12:04:43 +0430
From:      Mohammad BadieZadegan <mbzadegan@gmail.com>
To:        freebsd-wireless@freebsd.org
Subject:   Broadcom BCM4318
Message-ID:  <CADMcpTY3hkTfP2zJ0vb-QZo5Qof1mDFsWfuTb60xcjiEC%2BXfOw@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
Dear Felix Friedlander,
Thanks for following my issue.
I copied and reinstall your new bwn-kmod-firmware (0.2.0).
I think that my state is better than but still I do not get any IP.
PS: My WiFi LED turned on but it has not get any IP address.

************** My dmesg ***********
siba_bwn0: <Broadcom BCM4318 802.11b/g Wireless> mem 0xd0204000-0xd0205fff
irq 20 at device 2.0 on pci5
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4318 rev 9) PHY (analog 3 type 2 rev 7) RADIO (manuf
0x17f ver 0x2050 rev 8)
bwn0: DMA (32 bits)
bwn0: firmware version (rev 666 patch 2 date 0xb217 time 0x9e7)
bwn0: warn: firmware state (0)
bwn0: warn: firmware state (0)
bwn0: warn: firmware state (0)
bwn0: warn: firmware state (0)

************** My ifconfig ************
bwn0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 229=
0
    ether 00:14:a5:63:39:e5
    nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
    media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
    status: associated
wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 15=
00
    ether 00:14:a5:63:39:e5
    nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
    media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
    status: no carrier
    ssid "" channel 4 (2427 MHz 11g)
    country US authmode WPA2/802.11i privacy ON deftxkey UNDEF txpower 30
    bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
    roam:rate 5 protmode CTS wme roaming MANUAL
**********************************************


On Mon, Apr 20, 2015 at 11:16 AM, Felix Friedlander <felixphew0@gmail.com>
wrote:

> As you seem to be having problems applying my patch, I have applied the
> patch for you and compressed the result into the attached tarball.
> Unfortunately, I=E2=80=99m the only person who=E2=80=99s free to help wit=
h this atm and I=E2=80=99m
> less-than-knowledgable about the internal details of bwn(4) (which is
> unfortunate as I=E2=80=99m currently trying to update it!). Please try co=
pying this
> firmware into the ports tree and rebuilding.
>
> > On 20 Apr 2015, at 1:38 pm, Mohammad BadieZadegan <mbzadegan@gmail.com>
> wrote:
> >
> > Hi,
> > Long time no new hint!
> > Is that impossible to fix this BCM4318 BUG?
> > Regards.
> >
> > On Sat, Apr 18, 2015 at 6:50 AM, Mohammad BadieZadegan <
> mbzadegan@gmail.com>
> > wrote:
> >
> >> Hi Nikola Pajkovsky,
> >> This is the Felix Friedlander patch file.
> >> I get some Hunks Error in step one(Makefile).
> >>
> >> On Wed, Apr 15, 2015 at 4:28 PM, Nikola Pajkovsky <
> n.pajkovsky@gmail.com>
> >> wrote:
> >>
> >>> Mohammad BadieZadegan <mbzadegan@gmail.com> writes:
> >>>
> >>>> I try your command but nothing changed!
> >>>
> >>> Send me your patch and I will try it.
> >>>
> >>> --
> >>> Nikola
> >>>
> >>
> >>
> >>
> >> --
> >> <http://ir.linkedin.com/in/xadegan>;
> >>
> >
> >
> >
> > --
> > <http://ir.linkedin.com/in/xadegan>;
> > _______________________________________________
> > freebsd-wireless@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> > To unsubscribe, send any mail to "
> freebsd-wireless-unsubscribe@freebsd.org"
>
> --
> Felix Friedlander <felixphew0@gmail.com>
>
>
>
>
>
>


--=20
<http://ir.linkedin.com/in/xadegan>;



--=20
<http://ir.linkedin.com/in/xadegan>;



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CADMcpTY3hkTfP2zJ0vb-QZo5Qof1mDFsWfuTb60xcjiEC%2BXfOw>