Date: Thu, 14 Jun 2007 08:56:18 -0500 From: "eculp@argosteve.com" <eculp@argosteve.com> To: freebsd-stable@freebsd.org Subject: Re: atapicam and cd-rw problem, no cd0 but acd0 some error Message-ID: <20070614085618.ozgo990a048408g8@correo.argosteve.com> In-Reply-To: <1181827212.1212.27.camel@localhost> References: <200706132034.22794.idiotbg@gmail.com> <1181817741.1212.3.camel@localhost> <20070614073519.fhyyh35ztw8swssk@correo.argosteve.com> <1181827212.1212.27.camel@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Tom Evans <tevans.uk@googlemail.com>: > On Thu, 2007-06-14 at 07:35 -0500, eculp@argosteve.com wrote: >> Quoting Tom Evans <tevans.uk@googlemail.com>: >> >> > On Wed, 2007-06-13 at 20:34 +0200, Momchil Ivanov wrote: >> >> Hi guys, >> >> >> >> I am running 6-STABLE as of today and I cannot use the CD-RW on my >> >> IBM T40 to >> >> burn CDs. When I put atapicam_load=3D"YES" in loader.conf or >> compile it in the >> >> kernel I see the following error >> >> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0= x40 >> >> 0x00 0x01 >> >> and no /dev/cd0 is created. I don`t see the above error without atapic= am >> >> loaded or in kernel. This is not something new, I haven`t been able to >> >> get /dev/cd0 since more than a month following 6-STABLE, don`t know if= it >> >> ever worked on 6 or 6.x, but I certainly cannot get it to work on >> 6-STABLE. >> >> Any help would be appreciated :) I would be happy ot be able to burn C= Ds. >> >> >> >> I have acd0: CDRW <TOSHIBA DVD-ROM SD-R9012/1121> at ata1-master UDMA3= 3 >> >> and camcontrol shows: >> >> <TOSHIBA DVD-ROM SD-R9012 1121> at scbus2 target 0 lun 0 (pass1) >> >> >> >> Thanks >> >> >> > >> > The error message is benign - the controller tries to send a command to >> > the device, the device doesn't support it, so you get the error message= . >> > That's all, everything else should work. >> > >> > Do you load or compile into your kernel >> > =09device scbus >> > =09device cd >> > =09device atapicam >> > >> > atapicam allows you to access ATAPI devices through the SCSI subsystem, >> > so you must ensure that you have a SCSI subsystem to access them >> > through. >> > >> > Cheers >> > >> > Tom >> >> Hi Tom, >> >> I am getting a very similar error with my sony cdrom: >> >> Jun 14 07:12:36 HOME kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST >> asc=3D0x24 ascq=3D0x00 >> Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): error 22 >> Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): Unretryable Error >> Jun 14 07:12:36 HOME kernel: pass0 at ata1 bus 0 target 1 lun 0 >> Jun 14 07:12:36 HOME kernel: pass0: <SONY CD-RW CRX230ED 4YS1> >> Removable CD-ROM SCSI-0 device >> Jun 14 07:12:36 HOME kernel: pass0: 33.000MB/s transfers >> Jun 14 07:12:36 HOME kernel: GEOM: new disk cd0 >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error >> Jun 14 07:12:36 HOME kernel: cd0 at ata1 bus 0 target 1 lun 0 >> Jun 14 07:12:36 HOME kernel: cd0: <SONY CD-RW CRX230ED 4YS1> >> Removable CD-ROM SCSI-0 device >> Jun 14 07:12:36 HOME kernel: cd0: 33.000MB/s transfers >> Jun 14 07:12:36 HOME kernel: cd0: Attempt to query device size failed: >> NOT READY, Medium not present >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 >> Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error >> >> There was a good cd in the burner when booting. >> >> the unfortunate part is that in this case, it doesn't seem to be >> benign because I can't mount any cd nor can I use burncd or k3b. >> >> Any suggestions appreciated. IIRC, I can use burncd if I remove >> scsi support. >> >> Thanks, >> >> ed >> > > Hey ed > > Those errors look different to what was described (I only get one such > error in my dmesg), and different to what the OP reported (he didnt get > a cd0). > > I don't run STABLE, just CURRENT, so I don't know what to suggest. There > was a lot of talk about problems burning in k3b on freebsd-stable@ a few > months ago, I suggest searching the archives for k3b and see what the > resolution was to that. > > If you haven't already (and don't have a good reason to not), I'd ensure > your kernel + userland are up to date, perhaps track RELENG_6 rather > than RELENG_6_[12] and see if that helps. > > Tom > Thanks a lot, Tom. I am running RELENG6 from this morning. 6.2-STABLE FreeBSD 6.2-STABLE #279: Thu Jun 14 07:50:36 CDT 2007 I've had some really weird problems with RELENG_6 since the end of =20 May. My kernel from May 21 has fewer problems. Actually my CURRENT =20 machines are giving me no grief and I'm considering upgrading this one =20 to current. Thanks again, ed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070614085618.ozgo990a048408g8>