Date: Thu, 11 May 2000 07:05:35 -0400 From: Craig Huckabee <huck@nosc.mil> To: behanna@fast.net, freebsd-stable@FreeBSD.ORG Subject: Re: (Fwd) Problem Detecting/Using ISA Modem on 4.0-RELEASE Message-ID: <4.2.2.20000511065449.00a9c2f0@localhost> In-Reply-To: <39198C77.22591.3FC7F19@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
Chris, I think I have the same or similar problem. I too have an ISA PnP modem (Zoom V.90 Faxmodem) and have recently installed 4.0-RELEASE (a fresh install). I have added an entry to the PnP ID array in sio.c and rebuilt the kernel. No luck. The machine in question is at home so I don't have the exact dmesg output but it detects the modem as "Unknown0 <56K Faxmodem> at port 0x3e8 irq 5" or something similar. If I put an sio2 entry in my kernel config I get "irq5 not in bitmap" or something similar to that effect. If I leave out the sio2 entry, I get a "Cannot assign resource" error when the aforementioned 'unknown' device scrolls by. This modem has worked previously with 3.x versions of FreeBSD in the past and has worked under Linux as well. I'll try to grab my dmesg output when I go home and post it as well if anyone thinks it would help. Thanks, Craig At 04:21 PM 5/10/00 , Chris BeHanna wrote: > I sent this to freebsd-questions some time ago, and received >absolutely no response. Upon the advice of another FreeBSD fan, I've >forwarded it here. I'm still stuck, and, unfortunately, my >computer is still in storage (long, ugly story), so I can't get >you the dmesg output as of yet. I'll dig the machine out and >set it up if that's absolutely required, but with space at a >premium in the temporary living quarters, I'd prefer to avoid >that if possible. > >Thanks, >Chris BeHanna > >------- Forwarded message follows ------- >From: "Chris BeHanna" <behanna@fast.net> >Organization: Western Pennsylvania Pizza Disposal Unit >To: freebsd-questions@FreeBSD.ORG >Date sent: Thu, 27 Apr 2000 17:06:07 -0400 >Subject: Problem Detecting/Using ISA Modem on 4.0-RELEASE >Send reply to: behanna@fast.net > > I looked through the archives and tried the various things that >I found there, including adding an entry to the PnP ID array in >sio.c, but that didn't help. > > Here's what I have going on: 4.0-RELEASE, ISA PnP >modem (Zoom Telephonics V.90 Internal Faxmodem, PnP ID ZTIa0001). In >3.4-RELEASE, the only way I could get this modem to work was via the >command "pnp 2 0 irq0 7 port0 0x3e8", but this method is no longer >available, and I am now at a loss. FWIW, the modem used to come up >on sio3, and worked with /dev/cuaa2. > > I booted verbose once, and saw my ISA soundcard get successfully >probed, but then I got a message along the lines of "Card failed to >report resource information." Unfortunately, I've recently moved, >and my home computer and its dmesg output are in a box in a storage >unit until Monday. :-( > > Can someone tell me where to look to (perhaps) hardcode the >necessary resource information into the serial driver to use this >card? > > And, yes, sio3 is defined in my kernel. > > If I can get this working, I'll have a lot more ammo in my >FreeBSD vs. Linux discussions. It appears that I'm the only FreeBSD >partisan in a Linux/NT shop. > >Thanks, >Chris BeHanna >behanna@fast.net > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message >------- End of forwarded message ------- > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.20000511065449.00a9c2f0>