Date: Tue, 01 Oct 2002 13:06:59 +0100 From: Mark Murray <mark@grondar.za> To: jhb@freebsd.org Cc: current@freebsd.org Subject: PCI brokenness Message-ID: <200210011206.g91C6xWH000597@grimreaper.grondar.org>
next in thread | raw e-mail | index | archive | help
------- =_aaaaaaaaaa0
Content-Type: text/plain; charset="us-ascii"
Content-ID: <584.1033473854.1@grimreaper.grondar.org>
Hi
I'm running a kernel with your very latest nexus.c 1.49.
The problem of the disappearing HD has not been fixed by this.
Enclosed are verbose mesg's, one from a three-hour-ago
(1st Oct 2002, 11:00 am, BST) kernel (broken), and another
from a working Sept 22nd kernel.
M
--
o Mark Murray
\_
O.\_ Warning: this .sig is umop ap!sdn
------- =_aaaaaaaaaa0
Content-Type: text/plain; charset="us-ascii"
Content-ID: <584.1033473854.2@grimreaper.grondar.org>
Content-Description: dmesg.BROKEN
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Tue Oct 1 11:26:25 BST 2002
root@grimreaper.grondar.org:/usr/src/sys/i386/compile/LIBRETTO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ce000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc04ce0b4.
Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc04ce160.
Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc04ce20c.
Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc04ce2b8.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc04ce364.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04ce410.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc04ce4bc.
Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc04ce568.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04ce614.
Preloaded elf module "/boot/kernel/random.ko" at 0xc04ce6c0.
Preloaded elf module "/boot/kernel/atspeaker.ko" at 0xc04ce76c.
Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc04ce81c.
Preloaded elf module "/boot/kernel/nfsserver.ko" at 0xc04ce8c8.
Preloaded elf module "/boot/kernel/nfsclient.ko" at 0xc04ce978.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04cea28.
Calibrating clock(s) ... TSC clock: 233270316 Hz, i8254 clock: 1193097 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 233289783 Hz
CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67174400 (65600K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004f5000 - 0x04007fff, 61943808 bytes (15123 pages)
avail memory = 60010496 (58604K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f8e20
bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc5f8
pnpbios: Found PnP BIOS data at 0xc00f8e30
pnpbios: Entry = f0000:90a8 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID c932f351
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 0, max = 2, width = 3
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atspeaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
sio0: irq maps: 0x1 0x11 0x11 0x11
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
ppc0: parallel port not found.
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: parallel port not found.
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
BIOS Geometries:
0:03f8fe3f 0..1016=1017 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Timecounters tick every 10.000 msec
Initializing GEOMetry subsystem
g_add_class(GPT)
g_add_class(BSD)
g_add_class(MBR)
g_add_class(MBREXT)
g_add_class(PC98)
g_add_class(SUN)
g_add_class(AES)
g_add_class(DEV)
bpf: lo0 attached
Linux ELF exec handler installed
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
acpi_acad0: On Line
Mounting root from ufs:/dev/ad0s2a
g_dev_clone(ad0s2a)
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
------- =_aaaaaaaaaa0
Content-Type: text/plain; charset="us-ascii"
Content-ID: <584.1033473854.3@grimreaper.grondar.org>
Content-Description: dmesg.GOOD
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #25: Sun Sep 22 10:55:27 BST 2002
root@grimreaper.grondar.org:/usr/src/sys/i386/compile/LIBRETTO
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc04fb000.
Preloaded elf module "/boot/kernel.old/linux.ko" at 0xc04fb0b8.
Preloaded elf module "/boot/kernel.old/sysvshm.ko" at 0xc04fb168.
Preloaded elf module "/boot/kernel.old/sysvsem.ko" at 0xc04fb218.
Preloaded elf module "/boot/kernel.old/sysvmsg.ko" at 0xc04fb2c8.
Preloaded elf module "/boot/kernel.old/if_dc.ko" at 0xc04fb378.
Preloaded elf module "/boot/kernel.old/miibus.ko" at 0xc04fb428.
Preloaded elf module "/boot/kernel.old/if_wi.ko" at 0xc04fb4d8.
Preloaded elf module "/boot/kernel.old/snd_mss.ko" at 0xc04fb588.
Preloaded elf module "/boot/kernel.old/snd_pcm.ko" at 0xc04fb638.
Preloaded elf module "/boot/kernel.old/random.ko" at 0xc04fb6e8.
Preloaded elf module "/boot/kernel.old/atspeaker.ko" at 0xc04fb798.
Preloaded elf module "/boot/kernel.old/if_ep.ko" at 0xc04fb84c.
Preloaded elf module "/boot/kernel.old/nfsserver.ko" at 0xc04fb8fc.
Preloaded elf module "/boot/kernel.old/nfsclient.ko" at 0xc04fb9b0.
Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc04fba64.
Calibrating clock(s) ... TSC clock: 233269880 Hz, i8254 clock: 1193093 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 233289311 Hz
CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67174400 (65600K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00522000 - 0x04007fff, 61759488 bytes (15078 pages)
avail memory = 59830272 (58428K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f8e20
bios32: Entry = 0xfe95a (c00fe95a) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc5f8
pnpbios: Found PnP BIOS data at 0xc00f8e30
pnpbios: Entry = f0000:90a8 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID c932f351
Other BIOS signatures found:
Intel Pentium detected, installing workaround for F00F bug
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a050
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
Using $PIR table, 5 entries at 0xc00f8e80
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 17 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 19 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 19 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750 > on motherboard
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 2, width = 3
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
ACPI timer looks GOOD min = 0, max = 1, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x18a8-0x18ab on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
pci0: physical bus=0
found-> vendor=0x1179, dev=0x0601, revid=0x2e
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base ffc00000, size 21, enabled
map[18]: type 1, range 32, base ffb00000, size 20, enabled
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=255
map[10]: type 4, range 32, base 00000000, size 5, port disabled
found-> vendor=0x1179, dev=0x0701, revid=0x22
bus=0, slot=17, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=255
found-> vendor=0x1179, dev=0x060f, revid=0x20
bus=0, slot=19, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=255
found-> vendor=0x1179, dev=0x060f, revid=0x20
bus=0, slot=19, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=255
pci0: <display, VGA> at device 4.0 (no driver attached)
pci0: <simple comms> at device 17.0 (no driver attached)
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 19.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 0.19.INTA (source \\_SB_.PCI0.EIO_.LNKA)
pcib1: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
pcib1: slot 19 INTA routed to irq 3 via \\_SB_.PCI0.EIO_.LNKA
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 19.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib1: matched entry for 0.19.INTB (source \\_SB_.PCI0.EIO_.LNKB)
pcib1: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
pcib1: slot 19 INTB routed to irq 3 via \\_SB_.PCI0.EIO_.LNKB
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atspeaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
sio0: irq maps: 0x1 0x11 0x11 0x11
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
ppc0: parallel port not found.
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: parallel port not found.
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
isa0: <ISA bus> on motherboard
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI d0 00
ata0-master: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=50
ata0-master: ATA 01 a5
ata0: devices=01
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
pcm0 failed to probe at port 0xf8c-0xf94,0xe0e,0x530-0x537 irq 5 drq 1 on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sbc0 failed to probe at port 0x220 irq 5 drq 1 flags 0x10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03f8fe3f 0..1016=1017 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Timecounters tick every 10.000 msec
bpf: lo0 attached
Linux ELF exec handler installed
IPsec: Initialized Security Association Processing.
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
acpi_acad0: On Line
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: 3Com, Megahertz 589E, TP/BNC LAN PC Card, 005
pccard0: Manufacturer code 0x101, product 0x589
pccard0: function 0: network adapter, ccr addr 10000 mask 3
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
ep0: <3Com 3c589 10Mbps Ethernet> at port 0x100-0x10f irq 3 function 0 config 1 on pccard0
ep0: Ethernet address 00:10:5a:2d:39:c6
bpf: ep0 attached
stray irq 7
stray irq 7
found-> vendor=0x1011, dev=0x0019, revid=0x41
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=255
cardbus1: Expecting link target, got 0x0
cardbus1: Resource not specified in CIS: id=10, size=80
cardbus1: Resource not specified in CIS: id=14, size=400
dc0: <Intel 21143 10/100BaseTX> port 0x1000-0x107f mem 0x88002400-0x880027ff irq 3 at device 0.0 on cardbus1
dc0: Ethernet address: 00:80:00:80:00:80
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK2016GAP/U0.30 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, BIOSPIO
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x6, start 63, end = 4176899, size 4176837 : OK
ad0s2: type 0xa5, start 4176900, end = 16338104, size 12161205 : OK
ad0s3: type 0xb, start 16338105, end = 16530884, size 192780 : OK
ad0s4: type 0xa5, start 16530885, end = 39070079, size 22539195 : OK
start_init: trying /sbin/init
splash: image decoder found: star_saver
------- =_aaaaaaaaaa0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210011206.g91C6xWH000597>