Date: Wed, 3 Aug 2005 15:28:36 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org, Janos Mohacsi <mohacsi@niif.hu> Subject: Re: usb/83863: Communication problem between opensc/openct via USB with e-gate smart-card. Message-ID: <200508031528.38023.hselasky@c2i.net> In-Reply-To: <200508031150.j73BoJ3r099577@freefall.freebsd.org> References: <200508031150.j73BoJ3r099577@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 03 August 2005 13:50, Janos Mohacsi wrote: > The following reply was made to PR usb/83863; it has been noted by GNATS. > > From: Janos Mohacsi <mohacsi@niif.hu> > To: bug-followup@FreeBSD.org, janos.mohacsi@bsd.hu > Cc: > Subject: Re: usb/83863: Communication problem between opensc/openct via USB > with e-gate smart-card. > Date: Wed, 03 Aug 2005 13:42:45 +0200 > > I am using UHCI. See: > > > mohacsi@scone> sudo usbdevs -v > Controller /dev/usb0: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 addr 2: low speed, power 30 mA, config 1, SchlumbergerSema > Cryptoflex e-gate(0x0001), SchlumbergerSema(0x0973), rev 1.00 > port 2 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 powered > port 2 powered > > Should I try EHCI? If you got EHCI, you could try connecting your device through an USB 2.0 hub, if it is not USB 2.0 compliant. > > Is it normal to have patch failure to sys/i386/include/bus_at386.h ? > The contents of this file has been moved into "sys/i386/include/bus.h". The patches are not critical for the USB driver, so it is ok if they fail. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200508031528.38023.hselasky>