Date: Mon, 20 Dec 2004 15:55:47 -0600 From: Eric Schuele <e.schuele@computer.org> Cc: freeBSD-USB@freebsd.org Subject: Re: Trouble with TEAC usb floppy (FD-05PUB)... Message-ID: <41C74A63.8050303@computer.org> In-Reply-To: <41C748B7.5050707@computer.org> References: <41C748B7.5050707@computer.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Forgot to mention: It behaves the same with ACPI enabled or disabled. Eric Schuele wrote: > Hello, > > I'm having trouble with my TEAC (FD-05PUB) USB Floppy in 5.3-STABLE i386 > on a Dell Inspiron 5100. > > My problem appears to be that which is described in the following post(s): > http://news.gw.com/freebsd.ia64/348 > http://news.gw.com/freebsd.ia64/347 > > I was wondering if a fix had ever been developed. I have cvsup'd > RELENG_5 on Dec 19 2004, and the problem still persists. > > To summarize.. I see things like this in dmesg > umass0: TEAC TEAC FD-05PUB, rev 2.00/0.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <TEAC FD-05PUB 3000> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1MB (2880 512 byte sectors: 64H 32S/T 1C) > umass0: Unsupported UFI command 0x35 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi > status == 0x0 > umass0: Unsupported UFI command 0x35 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi > status == 0x0 > umass0: Unsupported UFI command 0x35 > (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x6, scsi > status == 0x0 > > ... and ... > > > <snip from one of the posts> > > da0 at umass-sim0 bus 0 target 0 lun 0 > > da0: <TEAC FD-05PUB 1026> Removable Direct Access SCSI-0 device > > da0: 1.000MB/s transfers > > da0: Attempt to query device size failed: NOT READY, Medium not present > > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > > (da0:umass-sim0:0:0:0): Medium not present > > (da0:umass-sim0:0:0:0): Unretryable error > > Opened disk da0 -> 6 > > Can mount the disk, ls the contents, but otherwise its useless. Page > fault when umounting and/or if I remove device before umounting. > > I have a kernel configuration including > usb, da, ohci, uhci > as per a post I found. > > It was working in 5.2.1-RELEASE... maybe in 5.3-BETA7 (I think). But > appears broken now. > > I've googled, read the manual, searched the PRs, read UPDATING, etc, > etc... can't find the fix. If I've missed it could someone please point > me in the right direction. > -- Regards, Eric
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41C74A63.8050303>