Date: Mon, 29 Dec 2003 21:57:55 +0100 From: Stefan Walter <sw@gegenunendlich.de> To: freebsd-current@freebsd.org Cc: sebastian ssmoller <sebastian.ssmoller@gmx.net> Subject: pcm(4) stopped working for <Intel ICH4 (82801DB)> Message-ID: <20031229205755.GA86771@kyuzo.dunkelkammer.void>
next in thread | raw e-mail | index | archive | help
--6TrnltStXW4iwmi0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline As Sebastian Ssmoller pointed out in [1], the pcm(4) driver doesn't work on an ASUS M2400N notebook with a RELENG_5_2 system. I'm having the same problem now, on the same model: | pcm0: <Intel ICH4 (82801DB)> port 0xe100-0xe13f,0xe000-0xe0ff at device 31.5 on pci0 | pcm0: unable to map IO port space | device_probe_and_attach: pcm0 attach returned 6 What wasn't said in that thread was that this did work in 5.1 (with ACPI enabled), as you can see from the dmesg output available at [2]. The complete dmesg output of the current system is attached to this mail. (I don't know if it's of any relevance, but it might be worth mentioning that IRQ 5 occurs frequently in it.) Maybe this helps to find the cause of the problem. Stefan [1]: http://groups.google.de/groups?selm=1071330727.904.19.camel%40tyrael.linnet.lucky.freebsd.current [2]: http://www.gegenunendlich.de/stuff/garuda/garuda.dmesg --6TrnltStXW4iwmi0 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg-5_2 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RC #0: Mon Dec 29 19:17:42 CET 2003 root@kyuzo.dunkelkammer.void:/usr/obj/usr/src/sys/GARUDA Preloaded elf kernel "/boot/kernel/kernel" at 0xc08dd000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08dd1cc. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1300MHz (600.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 259260416 (247 MB) avail memory = 242196480 (230 MB) Pentium Pro MTRR support enabled VESA: v3.0, 8000k memory, flags:0x1, mode table:0xc07e76e0 (1000040) VESA: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMRSDT > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTA is routed to irq 5 pcib0: slot 29 INTA is routed to irq 5 pcib0: slot 29 INTB is routed to irq 5 pcib0: slot 29 INTC is routed to irq 5 pcib0: slot 29 INTD is routed to irq 4 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xdc00-0xdc07 mem 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 5 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd480-0xd49f irq 5 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd800-0xd81f irq 5 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd880-0xd89f irq 5 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 3 INTC is routed to irq 5 pcib1: slot 4 INTA is routed to irq 5 pcib1: slot 5 INTA is routed to irq 5 cbb0: <RF5C476 PCI-CardBus Bridge> at device 3.0 on pci1 start (88000000) < sc->membase (ff700000) end (ffffffff) > sc->memlimit (ff7fffff) start (88000000) < sc->pmembase (de900000) end (ffffffff) > sc->pmemlimit (ff7fffff) cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: slot 3 INTA is routed to irq 5 cbb0: [MPSAFE] cbb1: <RF5C476 PCI-CardBus Bridge> at device 3.1 on pci1 start (88000000) < sc->membase (ff700000) end (ffffffff) > sc->memlimit (ff7fffff) start (88000000) < sc->pmembase (de900000) end (ffffffff) > sc->pmemlimit (ff7fffff) cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib1: slot 3 INTB is routed to irq 5 cbb1: [MPSAFE] fwohci0: <Ricoh R5C552> mem 0xff7ef000-0xff7ef7ff irq 5 at device 3.2 on pci1 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:03:0b:63:f0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:0b:63:f0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xff7efc00-0xff7efcff irq 5 at device 4.0 on pci1 rl0: Ethernet address: 00:0c:6e:68:fd:c0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: <network> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: <Intel ICH4 (82801DB)> port 0xe100-0xe13f,0xe000-0xe0ff at device 31.5 on pci0 pcm0: unable to map IO port space device_probe_and_attach: pcm0 attach returned 6 pci0: <simple comms> at device 31.6 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x2f8-0x2ff irq 3 drq 1 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <12 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 600024764 Hz quality 800 Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% system power profile changed to 'economy' GEOM: create disk ad0 dp=0xc2e3a460 ad0: 38154MB <IC25N040ATMR04-0> [77520/16/63] at ata0-master UDMA100 acd0: CDRW <TOSHIBA DVD-ROM SD-R2312> at ata1-master UDMA33 GEOM: create disk cd0 dp=0xc2cc7e00 cd0 at ata1 bus 0 target 0 lun 0 cd0: <TOSHIBA DVD-ROM SD-R2312 X708> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s1a --6TrnltStXW4iwmi0--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031229205755.GA86771>