Date: Mon, 20 Oct 2008 15:58:08 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Norikatsu Shigemura <nork@FreeBSD.org> Cc: freebsd-current@FreeBSD.org Subject: Re: Call for axe(4) testers. Message-ID: <20081020065808.GG38923@cdnetworks.co.kr> In-Reply-To: <20081020154925.92359c32.nork@FreeBSD.org> References: <20081003054756.GB71518@cdnetworks.co.kr> <20081020014057.febeb458.nork@FreeBSD.org> <20081020011339.GD38923@cdnetworks.co.kr> <20081020154925.92359c32.nork@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Oct 20, 2008 at 03:49:25PM +0900, Norikatsu Shigemura wrote: > On Mon, 20 Oct 2008 10:13:39 +0900 > Pyun YongHyeon <pyunyh@gmail.com> wrote: > > On Mon, Oct 20, 2008 at 01:40:57AM +0900, Norikatsu Shigemura wrote: > > > On Fri, 3 Oct 2008 14:47:56 +0900 > > > Pyun YongHyeon <pyunyh@gmail.com> wrote: > > > > Attached file is fix for AX88178 USB Gigabit controller. The patch > > > > removed old hack to find the correct PHY address of controller and > > > > it will affect all axe(4) controllers. If you have axe(4) hardware > > > > please give it try and let me know how it goes. > > > Oops, why vsc8211 is vitesse's instead of cicada's? :-) > > Because Vitesse now owns Cicada and Vitesse site clearly indicates > > the model name is VSC8211 single port 10/100/1000 PHY. > > Yes, but phy's vendor is reported as cicada. > > ciphy0 pnpinfo oui=0x3f1 model=0xb rev=0x1 at phyno=24 > ###### > > from sys/dev/mii/miidevs > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > oui CICADA 0x0003F1 Cicada Semiconductor > oui VITESSE 0x0001c1 Vitesse Semiconductor > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > > So vsc8211 should be set CICADA on src, but indicated VITESSE > on message. > I guess Vitesse used OUI Cicada if the PHY is based on Cicada's design. You also have valid points on regarding OUI. I don't have strong opions on the naming and if you prefer Cicada over Vitesse I'll change that. > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > miibus0: <MII bus> on axe0 > ciphy0: <Vitesse VSC8211 10/100/1000TX PHY> PHY 24 on miibus0 > ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081020065808.GG38923>