Date: Mon, 2 Oct 2000 11:15:04 +0100 From: arnaud.gibier@bt.com To: mobile@FreeBSD.org Subject: wi0 not working properly Message-ID: <F66469FCE9C5D311B8FF0000F8FE9E070595A1BF@mbtlipnt03.btlabs.bt.co.uk>
next in thread | raw e-mail | index | archive | help
------_=_NextPart_000_01C02C59.A1C18660 Content-type: text/plain; charset="us-ascii" Hi, I have installed FreeBSD-4.1 on a Dell Latitude CPx laptop. I am trying now to have a Lucent WaveLAN card working. Here are mykernel, rc.conf and pccard.conf files: <<MYKERNEL>> <<rc.conf>> <<pccard.conf>> When I reboot my Laptop the card is detected and assigned an irq number but I have after the following error messages: laptop1 pccard [43] : wi0 : Lucent Technologies ( WaveLAN/IEEE ) inserted. wi0 : tx buffer allocation failed wi0 : tx buffer allocation failed wi0 : xmit failed wi0 : tx buffer allocation failed laptop1 pccard [43] : pccard started wi0 : xmit failed wi0 : device timeout wi0 : tx buffer allocation failed Could someone help me to sort out the problem? Thanks, Arnaud. ------_=_NextPart_000_01C02C59.A1C18660 Content-type: application/octet-stream; name="MYKERNEL" Content-transfer-encoding: quoted-printable Content-Disposition: attachment; filename="MYKERNEL" machine i386=0A= cpu I686_CPU=0A= ident MYKERNEL=0A= maxusers 10=0A= =0A= options MATH_EMULATE #Support for x87 emulation=0A= options INET #InterNETworking=0A= options INET6 #IPv6 communications protocols=0A= options FFS #Berkeley Fast Filesystem=0A= options FFS_ROOT #FFS usable as root device [keep this!]=0A= options SOFTUPDATES #Enable FFS soft updates support=0A= options MFS #Memory Filesystem=0A= options MD_ROOT #MD is a potential root device=0A= options NFS #Network Filesystem=0A= options NFS_ROOT #NFS usable as root device, NFS required=0A= options MSDOSFS #MSDOS Filesystem=0A= options CD9660 #ISO 9660 Filesystem=0A= options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A= options PROCFS #Process filesystem=0A= options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A= options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI=0A= options UCONSOLE #Allow users to grab the console=0A= options USERCONFIG #boot -c editor=0A= options VISUAL_USERCONFIG #visual boot -c editor=0A= options KTRACE #ktrace(1) support=0A= options SYSVSHM #SYSV-style shared memory=0A= options SYSVMSG #SYSV-style message queues=0A= options SYSVSEM #SYSV-style semaphores=0A= options P1003_1B #Posix P1003_1B real-time extensions=0A= options _KPOSIX_PRIORITY_SCHEDULING=0A= options ICMP_BANDLIM #Rate limit bad replies=0A= options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A= =0A= device isa=0A= device pci=0A= =0A= # Floppy drives=0A= device fdc0 at isa? port IO_FD1 irq 6 drq 2=0A= device fd0 at fdc0 drive 0=0A= =0A= # ATA and ATAPI devices=0A= device ata0 at isa? port IO_WD1 irq 14=0A= device ata1 at isa? port IO_WD2 irq 15=0A= device ata=0A= device atadisk # ATA disk drives=0A= device atapicd # ATAPI CDROM drives=0A= device atapifd # ATAPI floppy drives=0A= options ATA_STATIC_ID #Static device numbering=0A= =0A= # SCSI Controllers=0A= =0A= # SCSI peripherals=0A= =0A= # RAID controllers=0A= =0A= # atkbdc0 controls both the keyboard and the PS/2 mouse=0A= device atkbdc0 at isa? port IO_KBD=0A= device atkbd0 at atkbdc? irq 1 flags 0x1=0A= device psm0 at atkbdc? irq 12=0A= =0A= device vga0 at isa?=0A= =0A= # splash screen/screen saver=0A= pseudo-device splash=0A= =0A= # syscons is the default console driver, resembling an SCO console=0A= device sc0 at isa? flags 0x100=0A= =0A= # Floating point support - do not disable.=0A= device npx0 at nexus? port IO_NPX irq 13=0A= =0A= # Power management support (see LINT for more options)=0A= device apm0 at nexus? disable flags 0x20 # Advanced Power = Management=0A= =0A= # PCCARD (PCMCIA) support=0A= device card=0A= device pcic0 at isa?=0A= =0A= # Serial (COM) ports=0A= device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A= =0A= # Parallel port=0A= device ppc0 at isa? irq 7=0A= device ppbus # Parallel port bus (required)=0A= device lpt # Printer=0A= device plip # TCP/IP over parallel=0A= device ppi # Parallel port interface device=0A= =0A= # ISA Ethernet NICs.=0A= device ed=0A= device wi=0A= =0A= # Pseudo devices - the number indicates how many units to allocated.=0A= pseudo-device loop # Network loopback=0A= pseudo-device ether # Ethernet support=0A= pseudo-device sl 1 # Kernel SLIP=0A= pseudo-device ppp 1 # Kernel PPP=0A= pseudo-device tun # Packet tunnel.=0A= pseudo-device pty # Pseudo-ttys (telnet etc)=0A= pseudo-device md # Memory "disks"=0A= =0A= # The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A= # Be aware of the administrative consequences of enabling this!=0A= pseudo-device bpf #Berkeley packet filter=0A= =0A= # USB support=0A= device usb # USB Bus (required)=0A= device ukbd # Keyboard=0A= device ums # Mouse=0A= ------_=_NextPart_000_01C02C59.A1C18660 Content-type: application/octet-stream; name="rc.conf" Content-transfer-encoding: quoted-printable Content-Disposition: attachment; filename="rc.conf" ##############################################################=0A= ### Important initial Boot-time options ####################=0A= ##############################################################=0A= =0A= pccard_enable=3D"YES" # Set to YES if you want to configure PCCARD = devices.=0A= pccard_mem=3D"0xd4000" # If pccard_enable=3DYES, this is card memory = address.=0A= pccard_beep=3D"1" # pccard beep type.=0A= pccard_ifconfig=3D"inet 132.146.249.128 netmask 255.255.255.0" # = Specialized pccard ethernet configuration (or NO).=0A= pccardd_flags=3D"" # Additional flags for pccardd.=0A= pccard_conf=3D"/etc/pccard.conf" # pccardd(8) config file=0A= rc_conf_files=3D"/etc/rc.conf /etc/rc.conf.local"=0A= =0A= ##############################################################=0A= ### Network configuration sub-section ######################=0A= ##############################################################=0A= =0A= ### Basic network and firewall/security options: ###=0A= #=0A= hostname=3D"laptop1.ipv6.bt.co.uk" # Set this!=0A= =0A= ##############################################################=0A= ### System console options #################################=0A= ##############################################################=0A= =0A= keymap=3D"uk.iso" # keymap in /usr/share/syscons/keymaps/* (or NO).=0A= moused_enable=3D"YES" # Run the mouse daemon.=0A= =0A= ##############################################################=0A= ### Miscellaneous administrative options ###################=0A= ##############################################################=0A= =0A= usbd_enable=3D"YES" # Run the usbd daemon.=0A= linux_enable=3D"YES" # Linux binary compatibility loaded at startup (or = NO).=0A= ------_=_NextPart_000_01C02C59.A1C18660 Content-type: application/octet-stream; name="pccard.conf" Content-transfer-encoding: quoted-printable Content-Disposition: attachment; filename="pccard.conf" # Default PCCARD configuration file=0A= #=0A= # Removing all IRQ conflicts from this file can't be done because of = some=0A= # IRQ-selfish PC-cards. So if you want to use some of these cards = in=0A= # your machine, you will be forced to modify their IRQ parameters = from=0A= # the following list.=0A= #=0A= # IRQ =3D=3D 0 means "allocate free IRQ from IRQ pool"=0A= # IRQ =3D=3D 16 means "do not use IRQ (e.g. PIO mode)"=0A= #=0A= # $FreeBSD: src/etc/defaults/pccard.conf,v 1.98.2.3 2000/07/19 12:58:12 = sanpei Exp $=0A= #=0A= # Send new entries for this file to imp@freebsd.org. He's = volunteered=0A= # to act as coordinator for this file.=0A= #=0A= =0A= # Generally available IO ports=0A= io 0x200-0x23F=0A= # Generally available IRQs (Built-in sound-card owners remove 5)=0A= irq 3 5 10 11 15=0A= # Available memory slots=0A= memory 0xd4000 96k=0A= =0A= # Include user configration file=0A= # This allow you to override or add configurations.=0A= include /etc/pccard.conf=0A= =0A= #=0A= # PLEASE KEEP THIS FILE IN ORDER=0A= #=0A= # In order is defined as follows. We sort first by driver type (an, = ed, etc)=0A= # and then by CIS strings. Do not commit to this file entries out = of=0A= # order.=0A= #=0A= =0A= ########## aic ##########=0A= =0A= # Adaptec SlimSCSI (also included with Sony CD-ROM players)=0A= card "Adaptec, Inc." "/APA-1460 .*/"=0A= config 0x9 "aic" ?=0A= insert camcontrol rescan $device=0A= =0A= # NewMedia Bustoaster SCSI=0A= card "New Media" "SCSI"=0A= config 0x22 "aic" ?=0A= insert camcontrol rescan $device=0A= =0A= ########## an ##########=0A= =0A= # Aironet PC4500 2Mbps 802.11 wireless NIC=0A= card "Aironet" "PC4500"=0A= config 0x5 "an" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Aironet PC4800 11Mbps 802.11 wireless NIC=0A= card "Aironet" "PC4800"=0A= config 0x5 "an" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= ########## ata ##########=0A= =0A= # Sony VAIO cdrom, Ninja-ATA CD-ROM Drive, MELCO CDN-D12EX=0A= card " " "NinjaATA-"=0A= config auto "ata" ?=0A= logstr "NinjaATA"=0A= =0A= # Non-brand Compact Flash Card(32MB)=0A= card " " "KCF 32M"=0A= config 0x1 "ata" ? iosize 16=0A= logstr "Compact Flash Card 32M"=0A= =0A= # Caravelle PSC-IDE 6x ATAPI CD-ROM=0A= card "Caravelle" "PSC-IDE "=0A= config 0x2a "ata" ? # 0x1 (flags for wd, not sure for ata)=0A= =0A= # <Vendor Unknown> MCD-601p 6x CD-ROM drive.=0A= card "CDROM" "IDE"=0A= config auto "ata" ?=0A= logstr "MCD-601p"=0A= =0A= # DATAFAB PCMMD2=0A= card "DATAFAB" "PCMCIA-TO-IDE"=0A= config 0x1 "ata" ?=0A= =0A= # DHU Mobile Media CD-ROM=0A= # (no hotplug support)=0A= card "Digital Equipment Corporation." "Digital Mobile Media CD-ROM"=0A= config 0xb "ata" 15=0A= =0A= # EXP DVD-780 DVD-ROM drive=0A= card "EXP " "PnPIDE"=0A= config auto "ata" ?=0A= =0A= # Toshiba mobile CD-ROM (Bundled with Portege 3110CT)=0A= card "FREECOM" "PCCARD-IDE"=0A= config auto "ata" ? iosize 16=0A= =0A= # FUJITSU FlashDiskCard ZEBO-ATA40=0A= card "FUJITSU" "ZEBO-ATA"=0A= config 0x03 "ata" ?=0A= =0A= # Greystone Diskdock=0A= card "GREYSTONE PERIPHERAL DISKDOCK" "/.*/"=0A= config default "ata" ?=0A= =0A= # HAGIWARA FLASH=0A= card "HAGIWARA" "FLASH"=0A= config default "ata" ?=0A= =0A= # Hitachi Flash ATA=0A= card "HITACHI" "/.*FLASH.*/"=0A= config 0x01 "ata" ? iosize 16=0A= =0A= # IBM Flash ATA (Ricoh Flash ATA 10MB)=0A= card "IBM" "IBM17JSSFP10"=0A= config auto "ata" ? iosize 16=0A= =0A= # XXX NOT SURE SUPPORTED=0A= # IBM Portable 4X Speed CD-ROM Drive CD-400=0A= #card "IBM" "PCMCIA CD-ROM Drive CD-400"=0A= # config 0x1 "ata" ? iosize 0x20 # 0x10000 (flags for wd, not sure for = ata)=0A= =0A= # IBM CD-20XSeries(IDE PC Card)=0A= card "IBM" "PCMCIA Portable CD-ROM Drive"=0A= config auto "ata" ? iosize 0x1=0A= =0A= # IBM Microdrive (CF+ Type II)=0A= card "IBM" "microdrive"=0A= # config 0x03 "ata" ?=0A= config 0x01 "ata" ? iosize 16=0A= =0A= # Integral Peripherals Viper HDD Series=0A= card "INTEGRAL PERIPHERALS" "ATA CARD"=0A= # config default "ata" ?=0A= config 0x01 "ata" ? iosize 16=0A= =0A= # IO DATA PCMF144/20 (as Flash ATA only)=0A= card "IO DATA" "ATA&MODEM"=0A= config 0x7 "ata" ?=0A= =0A= # IO DATA CBIDE2 in 16 bit mode=0A= # (bundled with IO DATA CDP-AX24T, Panasonic DVD-ROM LK-RV8171D)=0A= card "IO DATA" "CBIDE2"=0A= config default "ata" ?=0A= =0A= # IO Data PCIDE-II (bundled with CDP-TX6, etc.)=0A= card "IO DATA" "PCIDEII"=0A= config auto "ata" ?=0A= =0A= # Iomega Zip Drive=0A= card "Iomega" "PCMCIA to 16 bit ATAPI Adapter"=0A= config 0x2 "ata" ?=0A= =0A= # KODAK Picture Card=0A= card "KODAK Picture Card" "KODAK"=0A= config default "ata" ?=0A= =0A= # TOSHIBA Portable 24X Speed CD-ROM Drive PA2673UJ=0A= card "LOOKMEET" "CBIDE2"=0A= config default "ata" ?=0A= =0A= # Maxtor ATA HDD=0A= card "Maxtor" "/MXL.*/"=0A= config 0x03 "ata" ?=0A= =0A= # Microtech XpressDock=0A= card "Microtech International Inc." "IDE PCCARD"=0A= config auto "ata" ? 0x20000 iosize 16=0A= =0A= # Midori Elec. Flash ATA=0A= card "Midori Elec." "/.*FLASH.*/"=0A= config 0x03 "ata" ?=0A= =0A= # LK-RM120=0A= card "Panasonic" "LMEK0406"=0A= config 0x22 "ata" ? 0x1=0A= =0A= # Another boring, generic ata atapter=0A= card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"=0A= config auto "ata" ?=0A= =0A= # pc-card from PSCD-740 cdrom=0A= card "PCMCIA" "CD-ROM"=0A= config 0x1 "ata" ?=0A= =0A= # Shining PMIDE-ASC CDROM / Road Warrior Bullet Disk=0A= card "Shining" "PMIDE-ASC"=0A= config auto "ata" ? 0x20000=0A= =0A= # Microtech PortableDRIVE25/PCMCIA=0A= card "SHUTTLE TECHNOLOGY LTD." "PCCARD-IDE/ATAPI Adapter"=0A= config auto "ata" ? 0x20000=0A= =0A= # XXX NOT SURE SUPPORTED=0A= # CitiDISK & Addonics PocketZIP=0A= #card "Shining" "PMIDE-ASC"=0A= # config default "ata" ? # 0x20000 (flags for wd, not sure for ata)=0A= =0A= # Sicon Peripheral PCMCIA ATA/ATAPI Adapter=0A= card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter"=0A= config default "ata" ?=0A= =0A= # SiliconTech,Inc. Compact PC Card=0A= card "SiliconTech,Inc." "/[0-9]*MB Compact PC Card/"=0A= config 0x1 "ata" ?=0A= =0A= # Simple Technology ata flash=0A= card "Simple Technology " "STI-ATA"=0A= config 0x2 "ata" ?=0A= =0A= # SONY Memory Stick PC Card Adaptor=0A= card "SONY" "/MEMORYSTICK.*/"=0A= config 0x01 "ata" ?=0A= iosize 16=0A= =0A= # SunDisk Flash ATA=0A= # (OEM: Epson Flash Packer)=0A= card "SunDisk" "/.*/"=0A= config 0x1 "ata" ?=0A= =0A= # TDK Flash ATA=0A= card "TDK TC_H." "/.*/"=0A= config 0x1 "ata" ?=0A= =0A= # IO Data CBIDE (bundled with CDP-FX24, etc.)=0A= card "WIT" "IDE16"=0A= config auto "ata" ?=0A= =0A= # LIP-32B attached to Logitec LCW-PD648PI=0A= card "WORKBIT" "ATA-32Bi(16)"=0A= config default "ata" ?=0A= =0A= # Viking ATA Flash card=0A= card "VIKING ATA/CF FLASH CARD " "TOR/AM "=0A= config 0x2 "ata" ?=0A= =0A= ########## awi ##########=0A= =0A= # Generic AMD Am79c930 based card=0A= card "AMD" "Am79C930"=0A= config 0x1 "awi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= card "Bay Networks" "BayStack 650 Wireless LAN"=0A= config 0x1 "awi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= card "Farallon" "SkyLINE Wireless"=0A= config default "awi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= card "Icom" "SL-200"=0A= config 0x1 "awi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= ########## cnw ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # NetWave AirSurfer=0A= # NOTE: For some machines, wait cycle for memory access is required.=0A= # you should change "0x40" on the last part of "cardmem" line to = "0x44",=0A= # like:=0A= # cardmem 0xd4000 0x20000 0x9000 0x44=0A= # IBM ThinkPads are known to require this change.=0A= #card "Xircom" "CreditCard Netwave"=0A= # config 0x01 "cnw" ?=0A= # cardmem 0xd4000 0x20000 0x9000 0x40=0A= # config 0x01 "cnw" ?=0A= ## cardmem 0xdd000 0x20000 0x9000 0x40=0A= # ether 0x126 00:80:c7 00:20:d8=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= ########## ed ##########=0A= =0A= # No-brand NE2000 compatible card (FCC ID: LXLC1LANTB)=0A= card " " "Ethernet Combo card"=0A= config auto "ed" ? 0x10=0A= logstr "NE2000 compatible card"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Map Japan MPL-972=0A= card "2408LAN" "Ethernet"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Accton EN2212=0A= # Very slow! (PIO mode)=0A= card "ACCTON" "EN2212"=0A= config 0x1 "ed" ? 0x10=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= #Accton 2216=0A= card "ACCTON" "EN2216-PCMCIA-ETHERNET"=0A= config 0x20 "ed" ?=0A= # config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Allied Telesis CentreCOM LA100-PCM-T V2=0A= card "Allied Telesis, K.K" "CentreCOM LA100-PCM-T V2 100/10M LAN PC = Card"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Allied Telesis Ethernet Card=0A= card "Allied Telesis,K.K" "Ethernet LAN Card"=0A= config 0x1 "ed" ? 0x10=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Allied Telesis CentreCOM LA-PCM_V2 ethernet card=0A= # NTT-DATA ASTROWINK-M/MMOIL(IrLAN) ethernet card=0A= card "Allied Telesis, K.K." "CentreCOM LA-PCM_V2"=0A= config 0x20 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Allied Telesis CentreCOM LA100-PCM-T V2=0A= card "Allied Telesis, K.K." "CentreCOM LA100-PCM-T V2 100/10M LAN PC = Card"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Allied Telesis CentreCOM LA-PCM V3=0A= card "Allied Telesis K.K." "LA-PCM V3"=0A= config auto "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # AmbiCom 10BaseT card=0A= card "AmbiCom Inc" "AMB8002T"=0A= config 0x20 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Billionton LNT-10TB=0A= card "Billionton" "LNT-10TB"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # CNet BC40 adapter=0A= card "CNet" "CN40BC Ethernet"=0A= config 0x20 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # COREGA Ether PCC-T=0A= card "corega K.K." "corega Ether PCC-T"=0A= config 0x20 "ed" ?=0A= # config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # COREGA EtherII PCC-T=0A= card "corega K.K." "corega EtherII PCC-T"=0A= config 0x20 "ed" ?=0A= # config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # COREGA FastEther PCC-TX=0A= card "corega K.K." "corega FastEther PCC-TX"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Corega PCM-T=0A= card "Corega,K.K." "Ethernet LAN Card"=0A= config auto "ed" ?=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # CyQ've ELA-010=0A= card "CyQ've" "ELA-010"=0A= config 0x20 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # CyQ've ELA-110=0A= card "CyQ've" "ELA-110 10/100M LAN Card"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # CyQ've ELA-110E=0A= card "CyQ've" "ELA-110E 10/100M LAN Card"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # D-Link DE-650 NE2000 clone=0A= card "D-Link" "DE-650"=0A= config 0x20 "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # D-Link DE-660 NE2000 clone=0A= card "D-Link" "DE-660"=0A= config 0x20 "ed" ? 0x10=0A= ether 0x81=0A= # insert /etc/pccard_ether $device link0 -link1=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # D-Link DFE-650 NE2000 clone=0A= card "D-Link" "DFE-650"=0A= config 0x20 "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= # insert /etc/pccard_ether $device link0 -link1=0A= remove /sbin/ifconfig $device delete=0A= =0A= # D-Link DME-560T LAN/FAX/MODEM Card (as Ethernet)=0A= card "D-Link" "DME560T"=0A= config default "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Danpex (Alloy, etc.) EN-6200P2=0A= card "DANPEX" "EN-6200P2"=0A= config 0x22 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Dayna Communications CommuniCard E=0A= card "Dayna Communications, Inc." "CommuniCard E"=0A= config auto "ed" ? 0x10=0A= # ether 0x110 00:80:19=0A= ether 0x110 =0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Digital DEPCM-BA Ethernet=0A= card "DIGITAL" "DEPCM-XX"=0A= config auto "ed" ? 0x10=0A= # ether 0xff0 00:00:e8=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Planex FNW-3600-T=0A= card "Dual Speed" "10/100 PC Card"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Planex FNW-3600-TX 16bit FastEthernet DirectDock=0A= card "Dual Speed" "10/100 Port Attached PC Card"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # LinkSys ethernet card=0A= card "E-CARD" "E-CARD" =0A= config 0x20 "ed" ? =0A= logstr "LinkSys card"=0A= insert /etc/pccard_ether $device =0A= remove /sbin/ifconfig $device delete=0A= =0A= # Eiger Labs Ethernet COMBO=0A= card "EIGER Labs Inc." "Ethernet COMBO Card"=0A= config auto "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # XXX Compex Net-A adapter, Telecom SuperSocket RE450T and=0A= # Apollo PCMCIA Ethernet Adapter have same manufacturer and=0A= # card version string. They should be distinguished by =0A= # other info. (such as additional information or OEM-ID/product-ID).=0A= =0A= # Compex Net-A adapter=0A= card "Ethernet" "Adapter"=0A= config 0x1 "ed" ?=0A= ether 0xff0=0A= logstr "Compex Net-A adapter"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Telecom Device SuperSocket RE450T=0A= # Note: There are several revisions of the cardon the market.=0A= # Type A needs no "ether" line.=0A= # Type B needs "ether 0x110" line.=0A= # Type C needs "ether 0xff0" line.=0A= # Yet more revisions exist, reportedly.=0A= # If you see strange MAC address shown by ifconfig command,=0A= # try other config.=0A= card "Ethernet" "Adapter"=0A= config 0x2 "ed" ?=0A= # ether 0x110 00:e0:98=0A= # ether 0xff0 00:e0:98=0A= logstr "Telecom SuperSocket RE450T"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Apollo PCMCIA Ethernet Adapter=0A= card "Ethernet" "Adapter"=0A= config 0x0 "ed" ?=0A= logstr "Apollo PCMCIA Ethernet Adapter"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # "Ethernet Adapter" "E2000 PCMCIA Ethernet"=0A= card "Ethernet Adapter" "E2000 PCMCIA Ethernet"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # ADDTRON EP-210A=0A= card "EP-210 PCMCIA LAN CARD." "/.*/"=0A= config auto "ed" ? 0x10=0A= # ether 0x110 00:40:33=0A= ether 0x110=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # PLANEX (PLANET) FNW-3700-T=0A= card "Fast Ethernet" "16-bit PC Card"=0A= config auto "ed" ? 0x30000=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Planex FNW-3600-T 16bit FastEthernet=0A= card "Fast Ethernet" "Adapter"=0A= config 0x7 "ed" ?=0A= iosize 32=0A= logstr "Planex FNW-3600-T"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Grey Cell GCS2000 Ethernet Card=0A= card "Grey Cell" "GCS2000"=0A= config auto "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # GVC NIC-2000P Ethernet Card=0A= card "GVC" "NIC-2000p"=0A= config auto "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # IBM PCMCIA Ethernet I/II=0A= card "IBM Corp." "Ethernet"=0A= config 0x1 "ed" ?=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= #AR-P500 ethernet card=0A= card "IC-CARD" "IC-CARD"=0A= config 0x20 "ed" ?=0A= logstr "AR-P500 Ethernet card"=0A= insert /etc/pccard_ether $device=0A= remove ifconfig $device delete=0A= =0A= # IC-CARD+ Ethernet card=0A= card "IC-CARD+" "IC-CARD+"=0A= config auto "ed" ?=0A= logstr "IC-CARD+ Ethernet card"=0A= insert /etc/pccard_ether $device=0A= remove ifconfig $device delete=0A= =0A= # I/O DATA PCLA/T=0A= card "I-O DATA" "PCLA"=0A= config auto "ed" ? 0x10=0A= # ether 0x1c0 00:a0:b0=0A= # ether 0xff0 00:a0:b0=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove ifconfig $device delete=0A= =0A= # I-O DATA PCLATE=0A= card "IO DATA" "PCLATE"=0A= config 0x20 "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # I-O DATA PCETTX=0A= card "IO DATA" "PCETTX"=0A= config 0x20 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # KANSAI ELECTRIC KLA-PCM/T=0A= card "KANSAI ELECTRIC CO.,LTD" "KLA-PCM/T"=0A= config 0x1 "ed" 15=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Kingston KNE-PC2=0A= card "Kingston" "KNE-PC2"=0A= config default "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Kingston KNE-PCM/x Ethernet=0A= card "Kingston Technology Corp." "/EtheRx PC Card Ethernet.*/"=0A= config auto "ed" ?=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # ELECOM Laneed LD-10/100CD=0A= card "Laneed" "LD-10/100CD"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Elecom Laneed LD-CDF=0A= card "Laneed" "LD-CDF"=0A= config 0x20 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # ELECOM Laneed LD-CDS=0A= card "Laneed" "LD-CDS"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Linksys Combo PCMCIA EthernetCard (model EC2T on box) =0A= card "Linksys" "Combo PCMCIA EthernetCard (EC2T)"=0A= config 0x1 "ed" ? =0A= insert /etc/pccard_ether $device =0A= remove /sbin/ifconfig $device delete =0A= =0A= # Linksys Combo PCMCIA Ethernet Card=0A= card "LINKSYS" "E-CARD"=0A= config auto "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Linksys EtherFast 10/100 Intergrated PC Card (PCM100)=0A= card "Linksys" "EtherFast 10/100 Integrated PC Card (PCM100)"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device =0A= remove /sbin/ifconfig $device delete=0A= =0A= #Linksys EtherFast 10/100 PC Card (PCMPC100)=0A= card "Linksys" "EtherFast 10/100 PC Card (PCMPC100)"=0A= config 0x3 "ed" ?=0A= # config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Logitec LPM-LN100TX 100BASE-TX Ethernet LAN CARD=0A= card "Logitec" "LPM-LN100TX"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Logitec LPM-LN20T=0A= card "Logitec" "LPM-LN20T"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Socket LP-E (WinCE Low Power Ethernet)=0A= card "Low Power Ethernet LAN Adapter" "Socket Communications, Inc"=0A= config 0x20 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # ELECOM Laneed LD-CDWA (DP83902A)=0A= card "MACNICA" "ME1-JEIDA"=0A= config auto "ed" ?=0A= # ether 0xb8 08:00:42=0A= ether 0xb8=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Matsushita Electric Industrial Co.,LTD. CF-VEL211P-B=0A= card "Matsushita Electric Industrial Co.,LTD." "CF-VEL211"=0A= config auto "ed" ?=0A= # ether 0xff0 00:80:45=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # MELCO LPC2-T=0A= card "MELCO" "LPC2-T"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # MELCO LPC2-TX=0A= card "MELCO" "LPC2-TX"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Melco LPC-T (PIO mode)=0A= card "MELCO" "LPC3-TX"=0A= config 0x1 "ed" ? 0x30000=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # National Semiconductor InfoMover 4100=0A= card "National Semiconductor" "InfoMover 4100"=0A= config auto "ed" ?=0A= # ether 0xff0 08:00:17=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # National Semiconductor InfoMover NE4100=0A= card "National Semiconductor" "InfoMover NE4100"=0A= config 0x1 "ed" ?=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # NDC Ethernet Instant-Link NE2000 clone=0A= card "NDC" "Ethernet"=0A= config 0x22 "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # NEC PC-9801N-J12=0A= card "NEC" "PC-9801N-J12"=0A= config auto "ed" ?=0A= # ether 0xff0 00:00:4c=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # BayNetworks NETGEAR FA410TXC Fast Ethernet=0A= card "NETGEAR" "FA410TX"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Network Everywhere Ethernet 10BaseT PC Card=0A= card "Network Everywhere" "Ethernet 10BaseT PC Card"=0A= config 0x1 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Network Everywhere Ethernet Fast Ethernet 10/100 PC Card=0A= card "Network Everywhere" "Fast Ethernet 10/100 PC Card"=0A= config 0x5 "ed" 10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # New Media Corporation LiveWire 10/100=0A= card "New Media Corporation" "LiveWire 10/100"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # NextCom Next Hawk Etherneet Adapter=0A= card "NextCom K.K." "Next Hawk"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Nihon Unisys, Ltd. JPF0400-ETH=0A= card "Nihon Unisys, Ltd." "JPF0400-ETH"=0A= config auto "ed" ?=0A= # ether 0xff0 00:80:45=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Nihon Unisys, Ltd. JPF0400-LAN=0A= card "Nihon Unisys, Ltd." "JPF0400-LAN"=0A= config auto "ed" ?=0A= # ether 0xff0 00:80:45=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # No-brand NE-2000 compatible card=0A= card "PCMCIA" "ETHERNET V1.0"=0A= config auto "ed" ? 0x10=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Telecom Device SuperSocket HPC100=0A= card "PCMCIA" "FastEthernet"=0A= config auto "ed" ? 0x30000=0A= logstr "Telecom Device SuperSocket HPC100"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Billionton 10Base-TX ETHERNET PCCARD (aka UE2216)=0A= # Also Genuius "Ethernet ME3000II SE"=0A= card "PCMCIA" "PCMCIA-ETHERNET-CARD"=0A= config 0x20 "ed" ? 0x10=0A= logstr "UE2216"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Melco LPC-T (PIO mode)=0A= card "PCMCIA" "UE2212"=0A= config 0x1 "ed" ? 0x10=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # EXPsys PCMCIA Ethernet Combo, Relia PCMCIA Ethernet=0A= card "PCMCIA LAN" "Ethernet"=0A= config auto "ed" ?=0A= logstr "EXPsys Ethernet"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # LinkMates LM 336 LAN Fax/Modem PC Card=0A= card "PCMCIAs" "ComboCard"=0A= config 0x24 "ed" ? 0x10=0A= logstr "LinkMates LM 336"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Telecom Device SuperSocket LM336 (as Ethernet only)=0A= card "PCMCIAs" "LanModem"=0A= config default "ed" ?=0A= logstr "SuperSocket LM336"=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # PreMax PE-200 Ethernet Card=0A= card "PMX " "PE-200"=0A= config auto "ed" ? 0x10=0A= # ether 0x7f0 00:20:e0=0A= ether 0x7f0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Psion Dacom Gold Card V34 Ethernet GSM=0A= # as ethernet=0A= card "Psion Dacom" "Gold Card V34 Ethernet GSM"=0A= config default "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # RIOS PC CARD3 ETHERNET=0A= card "RIOS Systems Co." "PC CARD3 ETHERNET"=0A= config auto "ed" ?=0A= # ether 0xff0 00:00:48=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # RPTI EP401 Ethernet card=0A= card "RPTI" "EP401 Ethernet NE2000 Compatible"=0A= config 0x22 "ed" 9 =0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # SCM Ethernet Combo (*Not SMC :-)*)=0A= card "SCM" "Ethernet Combo card"=0A= config auto "ed" ? 0x10=0A= # ether 0xff0 00:20:cb=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Epson EEN10B Ethernet Card=0A= card "Seiko Epson Corp." "Ethernet"=0A= config auto "ed" ? 0x10=0A= # ether 0xff0 00:00:48=0A= ether 0xff0=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3way 3WL-847-TX=0A= card "SUN WAY" "3WL-847-TX 100BASE-TX"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Surecom EtherPerfect EP-427=0A= card "TAMARACK" "Ethernet"=0A= config 0x21 "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove ifconfig $device delete=0A= =0A= # Telecom Device SuperSocket RE450T and RE550T=0A= card "Telecom Device K.K." "/SuperSocket RE[45]50T/"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Toshiba Joho System PTJ-LAN/T=0A= card "TJ" "Ethernet"=0A= config auto "ed" ? 0x10=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Xircom CompactCard Ethernet 10 (CFE-10)=0A= card "Xircom" "CompactCard Ethernet"=0A= config auto "ed" ?=0A= insert /etc/pccard_ether $device=0A= remove ifconfig $device delete=0A= =0A= ########## ep ##########=0A= =0A= # 3Com Fast Etherlink 3C574TX=0A= card "3Com" "3C574-TX Fast EtherLink PC Card"=0A= config 0x1 "ep" ? 0x1=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3Com Megahertz 3CXEM556 (only lan side) doesn't work yet=0A= card "3Com" "Megahertz 3CXEM556"=0A= config 0x1 "ep" ? 0x1=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3Com Megahertz 3CCFEM556BI, 3CXEM556B=0A= # as ethernet=0A= card "3Com" "/Megahertz 3C.*EM556/"=0A= config default "ep" ? 0x1=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3Com Megahertz 574B=0A= card "3Com" "Megahertz 574B"=0A= config 0x1 "ep" ? 0x1=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3Com Etherlink III 3CXE589ET=0A= card "3Com" "Megahertz 589E"=0A= config 0x1 "ep" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3Com OfficeConnect 3CXSH572BT=0A= card "3Com" "OfficeConnect 572B"=0A= config 0x1 "ep" ? 0x1=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3Com Etherlink III 3C562 (as Network)=0A= # Don't think this will work.=0A= #card "3Com Corporation" "3C562"=0A= # config 0x9 "ep" ?=0A= # insert /etc/pccard_ether $device -link0 link1=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # 3Com Etherlink III 3C589B, 3C589C=0A= card "3Com Corporation" "3C589"=0A= config 0x1 "ep" ?=0A= # config auto "ep" ?=0A= insert /etc/pccard_ether $device -link0 link1=0A= # insert /etc/pccard_ether $device link0 -link1=0A= remove /sbin/ifconfig $device delete=0A= =0A= # 3Com Etherlink III 3C589D=0A= card "3Com Corporation" "3C589D"=0A= config 0x1 "ep" ?=0A= # config auto "ep" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Farallon EtherMac=0A= card "Farallon" "ENet"=0A= config 0x1 "ep" ?=0A= insert /etc/pccard_ether $device=0A= # insert /etc/pccard_ether $device link0=0A= remove /sbin/ifconfig $device delete=0A= =0A= ########## ex ##########=0A= =0A= # Olicom OC2220=0A= card "Olicom" "Ethernet"=0A= config 0x1 "ex" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= ########## fe ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # CONTEC C-NET(PC)C Ethernet=0A= #card "CONTEC Co.,Ltd." "/C-NET\(PC\)C.*/"=0A= # config auto "fe" ?=0A= ## ether 0x58 00:80:4c=0A= # ether 0x58 =0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Fujitsu MBH10303 Ethernet PCMCIA=0A= #card "EAGLE Technology" "NE200 ETHERNET LAN MBH10303 "=0A= # config 0x1 "fe" ?=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Eiger Labs EPX-10BT=0A= #card "Eiger labs,Inc." "EPX-10BT PC Card Ethernet 10BT"=0A= # config 0x20 "fe" ?=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Fujitsu FMV-J182, FMV-J182A=0A= #card "FUJITSU" "LAN Card(FMV-J182)"=0A= # config auto "fe" ?=0A= # # These cards have same ID strings, and different MAC address=0A= # # locations.=0A= ## ether 0xf2c 00:00:0e #FMV-J182=0A= # ether 0xf2c #FMV-J182=0A= ## ether 0x1cc 00:00:0e #FMV-J182A=0A= # ether 0x1cc #FMV-J182A=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Fujitsu Towa LA501 Ethernet=0A= #card "FUJITSU TOWA" "LA501"=0A= # config auto "fe" ? 0x10=0A= ## ether 0x332 00:00:0e=0A= # ether 0x332 =0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # HITACHI HT-4840-11=0A= #card "HITACHI" "HT-4840-11"=0A= # config 0x1a "fe" ?=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # NextCom J Link NC5310=0A= #card "NextComK.K." "/NC5310 Ver1\.0.*/"=0A= # config auto "fe" ?=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-5588, REX-9822, REX-4886=0A= #card "PCMCIA LAN MBH10304 ES" " 01"=0A= # config auto "fe" ?=0A= # ether 0x32c 00:c0:d0 # many minor revs....=0A= # ether 0x328 00:c0:d0=0A= # ether 0x200 00:c0:d0=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Fujitsu MBH10302=0A= #card "PCMCIA MBH10302" "01"=0A= # config 0x14 "fe" ?=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-R280=0A= #card "RATOC System Inc." "10BASE_T CARD R280"=0A= # config auto "fe" ?=0A= ## ether 0x1fc 00:c0:d0=0A= # ether 0x1fc=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # TDK LAK-CD021, LAK-CD021A, LAK-CD021BX=0A= #card "TDK" "LAC-CD02x"=0A= # config auto "fe" ?=0A= # # These cards have same ID strings, and different MAC address=0A= # # locations.=0A= # #ether 0x92 00:80:98 # LAC-CD021, LAC-021A=0A= # #ether 0x96 00:80:98 # LAC-CD021BX=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= ########## fdc ##########=0A= =0A= # Libretto Floppy disk=0A= card "Y-E DATA" "External FDD"=0A= config 0x4 "fdc" ?=0A= =0A= ########## gp ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # National Instruments PCMCIA-GPIB Cards=0A= #card "National Instruments" "PCMCIA-GPIB"=0A= # config default "gp" pio=0A= =0A= ########## hss ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Hitachi microcomputer speech synthesizer card=0A= #card "/HITACHI MICROCOMPUTER SYSTEM LTD.*/" "MSSHVPC02"=0A= # config default "hss" pio=0A= =0A= ########## joy ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # IO DATA PCJOY=0A= #card "IO DATA" "PCJOY"=0A= # config default "joy" pio=0A= ## config 0x1 "joy" pio=0A= ## config 0x2 "joy" pio=0A= =0A= ########## ncv ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # New Media Corporation BASICS SCSI=0A= # (Do not put this entry under Bustoaster)=0A= #card "BASICS by New Media Corporation" "SCSI Sym53C500"=0A= # config 0x14 "ncv" ?=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Media Intelligent SCSI-2 PC Card MSC-200=0A= #card "EPSON" "SCSI-2 PC Card SC200"=0A= # config 0x12 "ncv" ?=0A= =0A= # XXX NOT SUPPORTED YET=0A= # KME (TAXAN ICD-400PN, etc.)=0A= #card "KME" "KXLC002"=0A= # config 0x26 "ncv" ? 0xb4d00000=0A= =0A= # XXX NOT SUPPORTED YET=0A= # KME KXLC004=0A= #card "KME" "KXLC004"=0A= # config default "ncv" ? 0xb4d00001=0A= =0A= # XXX NOT SUPPORTED YET=0A= # IO DATA PCSC-DV=0A= # Macnica Miracle SCSI mPS100=0A= #card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0"=0A= # config 0x11 "ncv" ? 0xb6250000=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Macnica Miracle SCSI-II mPS110=0A= #card "MACNICA" "MIRACLE SCSI-II mPS110"=0A= # config 0x15 "ncv" ? 0=0A= =0A= # XXX NOT SUPPORTED YET=0A= # NEC PC-9801N-J03R=0A= #card "NEC" "PC-9801N-J03R"=0A= # config 0x15 "ncv" ? 0=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Qlogic Fast SCSI=0A= #card "QLOGIC CORPORATION" "pc05"=0A= # config 0x2f "ncv" ? 0x84d00000=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-9530=0A= #card "RATOC System Inc." "/SCSI2 CARD.*/"=0A= # config auto "ncv" ? 0x84d00000=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-5572 (as SCSI only)=0A= #card "RATOC System Inc." "/SOUND/SCSI2 CARD.*/"=0A= # config default "ncv" ? 0x84d00000=0A= ## cardio 0x640 0x10=0A= # iosize 16=0A= =0A= ########## nsp ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # WORKBIT Ninja SCSI series=0A= #card "IO DATA" "CBSC16 "=0A= # config default "nsp" ?=0A= =0A= # XXX NOT SUPPORTED YET=0A= # WORKBIT Ninja SCSI series=0A= #card "WBT" "NinjaSCSI-3"=0A= # config default "nsp" ?=0A= =0A= # XXX NOT SUPPORTED YET=0A= # WORKBIT Ninja SCSI series (PIO mode)=0A= #card "WBT" "NinjaSCSI-3"=0A= # config default "nsp" ? 0x1=0A= =0A= ########## opl ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-5570 Sound Card=0A= #card "1195 RATOC System Inc." "REX5570 SOUND CARD"=0A= # config default "opl" ?=0A= =0A= ########## scc ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # IBM Smart Capture Card=0A= #card "IBM Corp." "Video Capture"=0A= # config default "scc" pio=0A= # cardmem 0xd4000 0x0 0x8000=0A= =0A= ########## sio ##########=0A= =0A= # 3Com/USR/MegaHertz 3CCM156=0A= card "3COM" "3CCM156"=0A= config 0x23 "sio" ?=0A= =0A= # 3com/USR/Megahertz 3CCM556=0A= card "3Com" "3CXM/3CCM556"=0A= config 0x23 "sio" ?=0A= =0A= # 3Com Etherlink III 3C562 (as Modem)=0A= card "3Com Corporation" "3C562"=0A= config 0x09 "sio" ?=0A= =0A= # ADVANTECH COMpad-32/85 (dual port, but only one works)=0A= card "ADVANTECH" "COMpad-32/85"=0A= config auto "sio" ? 0x330=0A= =0A= # AIWA PV-JF288=0A= card "AIWA CO.,LTD." "PV-JF288 "=0A= config 0x23 "sio" ?=0A= =0A= # Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem. =0A= card "AD PC_CARD" "RC288ACL" =0A= config 0x22 "sio" ? =0A= # config auto "sio" ? =0A= =0A= # AIWA PV-JF3356=0A= card "AIWA CO.,LTD. MODEM" "PV-JF3356"=0A= config auto "sio" ? 0x40000=0A= =0A= # APEX DATA MultiCard (as Modem only)=0A= card "APEX DATA" "MULTICARD"=0A= config 0xb "sio" ?=0A= =0A= # Eiger 33.6 modem=0A= card "AT&T" "V34+ Fax Modem"=0A= config 0x23 "sio" ?=0A= =0A= # AT&T Paradyne KeepInTouch 14.4 modem=0A= card "AT&T Paradyne" "KeepInTouch Card"=0A= config 0x23 "sio" ?=0A= reset 1000=0A= =0A= # BUG Linkboy D64K (ISDN)=0A= card "BUG Inc." "Linkboy D64K"=0A= config 0x23 "sio" ?=0A= =0A= # NewMedia 14.4K FAX/Data Modem=0A= card "CIRRUS LOGIC" "FAX MODEM"=0A= config 0x23 "sio" ?=0A= =0A= # COM1 SA=0A= card "COM1 SA" "MC218 CARD"=0A= config 0x3 "sio" ?=0A= =0A= # COM1 SA=0A= card "COM1 SA" "MC220 CARD"=0A= config 0x3 "sio" ?=0A= =0A= # Digiteam Expresso 14.4 Modem=0A= card "Digiteam GmbH" "Expresso Modem"=0A= config 0x24 "sio" ?=0A= =0A= # Eicon DIVA T/A=0A= # at@menu Config menu=0A= # at>vc View current profile=0A= # at>vd View troubleshooting information=0A= card "Eicon Technology" "DIVA T/A"=0A= config 0x5 "sio" ?=0A= =0A= # Ericsson DC23 GSM modem card=0A= card "ERICSSON" "Modem, DC23"=0A= config 0x21 "sio" ?=0A= =0A= # GATEWAY 2000 FAX/Data Modem (14.4K)=0A= card "GATEWAY2000" "CC3144"=0A= config 0x22 "sio" ?=0A= =0A= # This one does work though=0A= card "HAYES" "OPT288"=0A= config 0x23 "sio" ?=0A= =0A= # Hayes OPTIMA 288 FAX/Data Modem=0A= # currently does not work on my machine=0A= card "Hayes" "OPTIMA 288 + FAX fo"=0A= config 0x24 "sio" ?=0A= reset 10000=0A= =0A= # IBM Push/Pop Modem (14.4K)=0A= card "IBM" "Push/Pop Modem(14.4K)"=0A= config 0x22 "sio" ?=0A= =0A= # IBM 56k PCCCARD modem=0A= card "IBM" "56K PC Card Modem"=0A= config 0x22 "sio" ?=0A= =0A= # Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as = modem)=0A= card "Intel" "EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter"=0A= config 0x1f "sio" ?=0A= =0A= # US Robotics Worldport 14400=0A= card "Intel" "MODEM 2400+"=0A= config 0x2 "sio" ?=0A= =0A= # Intelligent SurfCard=0A= card "Intelligent" "PCMCIA FAX+MODEM"=0A= config 0x1f "sio" ?=0A= reset 1000=0A= =0A= # Megahertz XJEM3288 (as modem)=0A= card "MEGAHERTZ" "CC/XJEM3288"=0A= config auto "sio" ?=0A= =0A= # Megahertz XJEM1336 (as modem)=0A= card "MEGAHERTZ" "CC/XJEM3336"=0A= config auto "sio" ?=0A= =0A= # Megahertz XJ1144=0A= card "MEGAHERTZ" "XJ1144"=0A= config 0x23 "sio" ?=0A= =0A= # Megahertz XJ2144 (US)=0A= card "MEGAHERTZ" "XJ2144"=0A= config 0x23 "sio" ?=0A= =0A= # Megahertz XJ2144 (JP)=0A= card "MEGAHERTZ" "XJ2144-81"=0A= config 0x23 "sio" ?=0A= =0A= # Megahertz XJ2288=0A= card "MEGAHERTZ" "XJ2288"=0A= config 0x23 "sio" ?=0A= =0A= # Megahertz XJ3288=0A= card "MEGAHERTZ" "XJ3288"=0A= config 0x21 "sio" ?=0A= =0A= # Megahertz XJ-CC4288=0A= card "Megahertz" "XJ-CC4288"=0A= config 0x23 "sio" ?=0A= =0A= # Megahertz XJ4336=0A= card "Megahertz" "XJ4336-CC4336"=0A= config 0x22 "sio" ?=0A= # config auto "sio" ?=0A= # config 0x23 "sio" ?=0A= =0A= # XXX generic serial?=0A= # Megahertz X-Jack Ethernet/Modem 14.4K (as Modem only)=0A= card "Megahertz" "XJEM1144/CCEM1144"=0A= config 0x27 "sio" ?=0A= =0A= # Motorola Montana =0A= card "Motorola" "MONTANA 33.6 FAX/MODEM"=0A= config 0x21 "sio" ?=0A= =0A= # XXX generic serial?=0A= # Motorola Marine multifunction card (as modem)=0A= card "Motorola, Inc." "MARINER MODEM/FAX/LAN"=0A= config 0x35 "sio" ?=0A= =0A= # NTT ThunderCard Modem=0A= card "NTT-IT CO., LTD" "ThunderCard AVF288, V.34"=0A= config 0x22 "sio" ?=0A= =0A= # NTT DoCoMo Mobile D Card 96P1=0A= card "NTT DoCoMo" "Mobile D Card 96P1"=0A= # config 0x22 "sio" ? 0x82=0A= config 0x23 "sio" ? 0x82=0A= # config auto "sio" ? 0x82=0A= =0A= # NTT DoCoMo (formerly NTT Personal) Paldio 611S=0A= card "NTT DoCoMo" "PALDIO 611S PC CARD"=0A= config auto "sio" ? 0x40000=0A= =0A= # NTT DoCoMo DATA/FAX Adapter=0A= card "NTT DoCoMo" "PCMCIA DATA/FAX ADAPTER 9600 Mark2"=0A= config auto "sio" ?=0A= =0A= # NTT DoCoMo DATA/FAX Adapter=0A= card "NTT DoCoMo" "/PCMCIA DATA/FAX.*/"=0A= config auto "sio" ? 0x82=0A= =0A= # NTT-IT ThunderCard=0A= card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128"=0A= config auto "sio" ? 0x80=0A= reset 1000=0A= =0A= # NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio = 321S=0A= card "NTT Personal" "32K Paldio 321S PC CARD"=0A= config 0x23 "sio" ?=0A= =0A= # NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio = 341S=0A= card "NTT Personal" "32K Paldio 341S PC CARD"=0A= config 0x23 "sio" ?=0A= =0A= # NTT Personal Paldio Data Card DC-1S=0A= card "NTT Personal" "/Paldio Data.*/" "DC-1S"=0A= config auto "sio" ? 0x40000=0A= =0A= # Nokia Cellular Data Card=0A= card "Nokia Mobile Phones" "DTP-2"=0A= config 0x22 "sio" ?=0A= config 0x23 "sio" ?=0A= =0A= # This Nokia example allows either 1 or 2 Nokia cards to be fitted.=0A= # With 2 Mobile Phones and Multilink PPP you can get a 19200 data = channel.=0A= # Nokia Cellular Data Card=0A= card "Nokia Mobile Phones" "DTP-2 ver II"=0A= config 0x23 "sio" ?=0A= config 0x24 "sio" ?=0A= =0A= # Novalink NovaModem 144=0A= card "NovaLink Tech." "NovaModem 144 "=0A= config 0x23 "sio" ?=0A= =0A= # Novatel Merlin CDPD card (wireless modem)=0A= card "Novatel Wireless" "Merlin Type II Wireless IP Modem"=0A= config auto "sio" ?=0A= =0A= # Omron ME2814 FAX/DATA MODEM=0A= card "OMRON" "ME2814 FAX/DATA MOD"=0A= config 0x23 "sio" ?=0A= =0A= # Omron MD24XCA FAX/Data Modem=0A= card "OMRON Corp." "MD24XCA"=0A= config 0x23 "sio" ?=0A= reset 10000=0A= =0A= # Option International PCMCIA55K06=0A= card "Option International" "GSM Data/Fax/SMS Modem"=0A= config 0x22 "sio" ?=0A= =0A= # Banksia CardModem 56=0A= card "PCCardModem" "CardModem 56"=0A= config 0x22 "sio" ?=0A= =0A= # Eiger PCCARD modem =0A= # Apparently this modem does not work unless the recommended=0A= # init string (AT&F&C1&D2) is supplied.=0A= card "PCMCIA " "33.6K Fax/Modem "=0A= config 23 "sio" ?=0A= =0A= # Actiontec Datalink with v.90 upgrade=0A= card "PCMCIA " "56K V.90 Fax Modem (LK) "=0A= config 0x1f "sio" ?=0A= =0A= # Billionton 56Kbps Fax Modem=0A= card "PCMCIA CARD 56KFaxModem" "FM56C-NFS"=0A= config 0x22 "sio" ?=0A= =0A= # PREMAX FM288 FAX/Data Modem=0A= card "PREMAX" "FM288 "=0A= config 0x23 "sio" ?=0A= =0A= # Panasonic FM-RADIO card=0A= card "Panasonic" "CF-JVR101"=0A= config 0x22 "sio" ?=0A= =0A= # Panasonic KX-PH402D=0A= card "Panasonic" "KX-PH402D"=0A= config 0x23 "sio" ?=0A= =0A= # Panasonic Modem Card TO-706C=0A= card "Panasonic" "TO-706C"=0A= config 0x23 "sio" ?=0A= =0A= # Panasonic Modem Card TO-706C=0A= card "Panasonic" "TO-CAF288"=0A= config 0x23 "sio" ?=0A= =0A= # Panasonic TO-CAF56K FAX/Data Modem=0A= card "Panasonic Co." "TO-CAF56K"=0A= # config auto "sio" pio=0A= config auto "sio" ?=0A= reset 10000=0A= =0A= # Random modem bundled with Dell systems=0A= card "Psion Dacom" "Gold Card Global 56K+Fax"=0A= config 0x23 "sio" ?=0A= =0A= # RFI HotLine serial card=0A= card "RFI" "RS-232 ComCard Rev.II"=0A= config 0x23 "sio" ?=0A= insert remove -t pccard:$device -s RFI Hotline removed=0A= =0A= # SII MC-6530=0A= card "SII" "PHS DATA 32S"=0A= config auto "sio" ? 0x40000=0A= =0A= # SII (DDI) MC-6550=0A= card "SII" "PHS DATA 64"=0A= config auto "sio" ? 0x40000=0A= =0A= # TDK 14.4 FAX/Data Modem=0A= card "TDK" "DF1414 DATA/FAX MOD"=0A= config 0x23 "sio" ?=0A= =0A= # TDK 14.4 FAX/Data Modem=0A= card "TDK" "DF1414EX DATA/FAX M"=0A= config 0x23 "sio" ?=0A= =0A= # TDK DN1280R=0A= card "TDK" "DN1280R"=0A= config auto "sio" ?=0A= reset 1000=0A= =0A= # TDK DP9600=0A= card "TDK" "DP9600"=0A= config auto "sio" ? 0x40000=0A= =0A= # XXX NOT SURE SUPPORTED=0A= # TDK Multifunctioon Card (as Modem)=0A= #card "TDK" "GlobalNetworker 3410/3412"=0A= # config auto "sio" ? 0x40000=0A= =0A= # XXX NOT SURE SUPPORTED=0A= # XXX generic serial?=0A= # Toshiba Modem/LAN card IPC5001B=0A= #card "TOSHIBA" "Modem/LAN Card"=0A= # config 0x25 "sio" ?=0A= =0A= # 3Com/USR/Toshiba SLIMV90=0A= card "TOSHIBA" "SLIMV90"=0A= config 0x4 "sio" ?=0A= =0A= # 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks)=0A= card "Toshiba America" "3CXM056-BNW"=0A= config 0x20 "sio" ?=0A= =0A= # U.S. Robotics XJ1560J=0A= card "U.S. Robotics" "XJ/CC1560J"=0A= config 0x22 "sio" ?=0A= =0A= # Megahertz XJ1336=0A= card "U.S. Robotics" "XJ/CC1336"=0A= config 0x21 "sio" ?=0A= =0A= # US Robotics Sportster PCMCIA V.34=0A= # US Robotics COURIER PCMCIA V.34=0A= card "USRobotics" "PCMCIA 28800 Data/F"=0A= config 0x3 "sio" ?=0A= =0A= # Viking V.90/K56Flex modem=0A= card "Viking" "V.90 K56flex"=0A= config 0x23 "sio" ?=0A= =0A= # Xircom CreditCard Ethernet+Modem (Modem only !!!)=0A= card "Xircom" "CreditCard Ethernet"=0A= config 0x23 "sio" ?=0A= =0A= # Xircom CreditCard Ethernet 10/100 + modem (modem part)=0A= card "Xircom" "CreditCard Ethernet+Modem 33.6"=0A= config 0x23 "sio" ?=0A= =0A= # Xircom GlobalACCESS modem=0A= card "Xircom" "CreditCard Modem 56 - GlobalACCESS"=0A= config 0x1f "sio" ?=0A= =0A= # Xircom CreditCard Modem=0A= card "Xircom" "CreditCard Modem CM-56T"=0A= config 0x17 "sio" ?=0A= reset 100=0A= =0A= # Zoom 56K modem =0A= # Freezes your system entirely if you don't have the reset..=0A= card "Zoom Telephonics, Inc." "PCMCIA 56K LT DataFax"=0A= config 0x1f "sio" ?=0A= reset 1000=0A= =0A= ########## sn ##########=0A= =0A= # Megahertz X-Jack Ethernet=0A= card "Megahertz" "CC10BT/2"=0A= config 0x1 "sn" ?=0A= ether attr2=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Megahertz Ethernet Adapter=0A= card "Megahertz" "ETHERNET ADAPTOR"=0A= config auto "sn" ?=0A= # ether attr2hex 00:00:86=0A= ether attr2=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Megahertz X-Jack Ethernet/Modem 14.4K=0A= #card "MEGAHERTZ" "XJEM1144/CCEM1144"=0A= # multifunc=0A= # config default "sn" ?=0A= # config 0x27 "sio" shared=0A= =0A= # MELCO LPC-TX=0A= card "MELCO/SMC" "LPC-TX"=0A= config auto "sn" ?=0A= # ether 0x4a 00:a0:dc=0A= ether 0x4a=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # SMC EtherEZ Combo(SMC8020BT)=0A= card "SMC" "EtherEZ Ethernet 8020"=0A= config default "sn" ?=0A= # ether 0x9a 00:00:c0=0A= # ether 0x9a=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Victor M-MOIL CARD=0A= card "JVC" "MiniMoil Ethernet Card"=0A= config 0x01 "sn" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= ########## spc ##########=0A= =0A= # REX5535AC, REX5535X SCSI=0A= card "PCMCIA SCSI MBH1040" "01"=0A= config 0x3a "spc" ?=0A= =0A= ########## stg ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-5536, Melco IFC-SC=0A= #card "1195 RATOC System Inc." "REX5536 SCSI2 CARD"=0A= # config 0x7 "stg" ? 0=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Future Domain SCSI2GO=0A= #card "Future Domain Corporation" "SCSI PCMCIA Credit Card = Controller"=0A= # config default "stg" ?=0A= =0A= # XXX NOT SUPPORTED YET=0A= # IBM SCSI PCMCIA Card=0A= #card "IBM Corp." "SCSI PCMCIA Card"=0A= # config default "stg" ?=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI=0A= # (Don't put this entry under REX5535 series!)=0A= # There's a buggy revision of this card which has broken CIS = tupples.=0A= # if you can't use this card, please use the point enabler. (for = example,=0A= # type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command = prompt)=0A= #card "PCMCIA SCSI MBH10404" "01"=0A= # config 0x37 "stg" ?=0A= # logstr "RATOC REX-5536AM SCSI"=0A= =0A= # XXX NOT SUPPORTED YET=0A= # RATOC REX-5536M=0A= #card "PCMCIA SCSI2 CARD" "01"=0A= # config 0x5 "stg" ? 0=0A= # logstr "RATOC REX-5536M SCSI"=0A= =0A= ########## wlp ##########=0A= =0A= # XXX NOT SUPPORTED YET=0A= # AT&T GIS Wavelan PCMCIA=0A= # If you want to use Japanese version, uncomment the second config=0A= # line and comment-out the first line.=0A= #card "AT&T" "WaveLAN/PCMCIA"=0A= # config default "wlp" ? # US version (915MHz)=0A= ## config default "wlp" ? 0x01 # Japanese version (2.4GHz)=0A= ## ether wavelan=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Digital RoamAbout=0A= #card "Digital" "RoamAbout/DS"=0A= # config auto "wlp" ?=0A= ## ether wavelan=0A= # insert /usr/sbin/wlpconfig -i wlp0 -w 0xaaaa=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # Lucent Wavelan=0A= #card "Lucent Technologies" "WaveLAN/PCMCIA"=0A= # config default "wlp" ?=0A= # ether wavelan=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SUPPORTED YET=0A= # NCR Wavelan PCMCIA=0A= # If you want to use Japanese version, uncomment the second config=0A= # line and comment-out the first line.=0A= #card "NCR" "WaveLAN/PCMCIA"=0A= # config default "wlp" ? # US version (915MHz)=0A= ## config default "wlp" ? 0x01 # Japanese version (2.4GHz)=0A= # ether wavelan=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= =0A= ########## wi ##########=0A= =0A= # Cabletron RoamAbout, WaveLAN/IEEE clone=0A= card "Cabletron" "RoamAbout 802.11 DS"=0A= config 0x1 "wi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Lucent WaveLAN/IEEE=0A= card "Lucent Technologies" "WaveLAN/IEEE"=0A= config 0x1 "wi" ?=0A= insert /etc/pccard_ether $device=0A= insert /usr/sbin/wicontrol -i wi0 -n "IPv6 Group"=0A= insert /usr/sbin/wicontrol -i wi0 -p 1=0A= remove /sbin/ifconfig $device delete=0A= =0A= # NCR WaveLAN/IEEE=0A= card "NCR" "WaveLAN/IEEE"=0A= config 0x1 "wi" ?=0A= # config auto "wi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Melco Airconnect=0A= card "MELCO" "WLI-PCM-L11"=0A= config 0x1 "wi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # PLANEX GeoWave/GW-NS110=0A= card "PLANEX" "GeoWave/GW-NS110"=0A= config 0x1 "wi" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= ########## xe ##########=0A= =0A= # Accton EN2226/Fast EtherCard (16-bit verison)=0A= card "Accton" "Fast EtherCard-16"=0A= config default "xe" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Compaq Netelligent 10/100 PC Card=0A= card "Compaq" "Netelligent 10/100 PC Card"=0A= config 0x1 "xe" ?=0A= insert /etc/pccard_ether $device=0A= remove sbin/ifconfig $device delete=0A= =0A= # Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison)=0A= card "Intel" "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16"=0A= config 0x1 "xe" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # XXX NOT SURE SUPPORTED=0A= # Toshiba 10/100 Ethernet PC Card IPC5008A=0A= #card "Toshiba" "10/100 Ethernet PC Card"=0A= # config auto "xe" ?=0A= ## cardio 0x300 0x10=0A= # iosize 16=0A= # insert /etc/pccard_ether $device=0A= # remove /sbin/ifconfig $device delete=0A= =0A= # Xircom Realport card + modem=0A= card "Xircom" "16-bit Ethernet + Modem 56"=0A= config 0x27 "xe" 9=0A= insert /etc/pccard_ether $device=0A= remove /etc/pccard_ether $device delete=0A= =0A= # Xircom CreditCard Ethernet 10/100=0A= card "Xircom" "CreditCard 10/100"=0A= config 0x1 "xe" ?=0A= insert /etc/pccard_ether $device=0A= remove /etc/pccard_ether $device delete=0A= =0A= # Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" = (PS-CE2-10)=0A= card "Xircom" "CreditCard 10Base-T"=0A= config auto "xe" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)=0A= card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"=0A= config 0x27 "xe" ?=0A= insert /etc/pccard_ether $device=0A= remove /sbin/ifconfig $device delete=0A= =0A= # = -------------------------------------------------------------------=0A= # =0A= # "Wildcard" entries=0A= # =0A= # = -------------------------------------------------------------------=0A= =0A= # GENERIC PCMCIA modem=0A= generic serial=0A= config auto "sio" ?=0A= reset 10000 # for unstable cards=0A= logstr "GENERIC PCMCIA modem"=0A= =0A= # GENERIC Flash ATA / ATA HDD=0A= generic fixed_disk=0A= config auto "ata" ?=0A= logstr "GENERIC Flash ATA / ATA HDD"=0A= =0A= ------_=_NextPart_000_01C02C59.A1C18660-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F66469FCE9C5D311B8FF0000F8FE9E070595A1BF>