Date: Wed, 14 May 2003 00:14:21 -0400 From: Bob Lockie <bjlockie@lockie.ca> To: freebsd-hardware@freebsd.org Subject: Re: ATX boards and restart after power failure Message-ID: <3EC1C29D.5040505@lockie.ca> In-Reply-To: <00e201c319c7$41063ce0$c601000a@allandesktop> References: <3EC1ADAC.3050107@lockie.ca> <3EC1B2C8.8000801@lockie.ca> <00e201c319c7$41063ce0$c601000a@allandesktop>
next in thread | previous in thread | raw e-mail | index | archive | help
> Lol, just got this email just after i sent my last one,. so sorry to use up > the bandwidth :) > > Have you tried getting a new firmware revision, it might have support for > it?? I flashed the latest BIOS, I'm pretty sure it is the hardware that was lacking. I did a search of the web and found a disussion on the list from 1998 about this problem. I am hoping that the original person that said he could design a circuit to hack it is still on this list. http://docs.freebsd.org/cgi/getmsg.cgi?fetch=3155+0+archive/1998/freebsd-hardware/19981011.freebsd-hardware > > -|- Hurgh -|- > > > __________________________ > Website: http://www.hurgh.org/ > Forums: http://forums.hurgh.org/ > > > > ----- Original Message ----- > From: "Bob Lockie" <bjlockie@lockie.ca> > Cc: <freebsd-hardware@freebsd.org> > Sent: Wednesday, May 14, 2003 1:06 PM > Subject: Re: ATX boards and restart after power failure > > > >>On 05/13/03 22:45 Bob Lockie spoke thusly >> >> >>>Does anybody remember this topic? >>> >>>DATE: 10/19/1998 02:35:30 >>>SUBJECT: RE: ATX boards and restart after power failure >>> >>>I have an Asus P5A r1.04 mainboard that I want to use for a server but >>>it does not reboot after a power failure. >>>r1.06 of the P5A does but that doesn't help me. >>> >>>Did anybody find a work around? >>>I've contacted Asus but I expect them to just say that I am out of luck >>>with the revision board that I have. >> >>I wasn't clear. >>The BIOS setting for this is not selectable because it is not supported >>on the revision of the mainboard that I have (1.04). >>It was later added to revision 1.06 of the mainboard but that doesn't >>help me.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3EC1C29D.5040505>