Date: Sun, 22 Mar 2009 23:38:53 +0300 From: Alex Keda <admin@lissyara.su> To: Robert Noland <rnoland@FreeBSD.org> Cc: freebsd-current@freebsd.org Subject: Re: last update and oldest ati|drm problems Message-ID: <49C6A1DD.1030500@lissyara.su> In-Reply-To: <1237751433.1687.21.camel@balrog.2hip.net> References: <49C64AA5.3000509@lissyara.su> <1237743234.1687.7.camel@balrog.2hip.net> <49C67E10.2000202@lissyara.su> <1237745742.1687.12.camel@balrog.2hip.net> <49C68B95.5020402@lissyara.su> <1237751433.1687.21.camel@balrog.2hip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Robert Noland пишет: > On Sun, 2009-03-22 at 22:03 +0300, Alex Keda wrote: >> Robert Noland пишет: >>> On Sun, 2009-03-22 at 21:06 +0300, Alex Keda wrote: >>>> Robert Noland пишет: >>>>> On Sun, 2009-03-22 at 17:26 +0300, Alex Keda wrote: >>>>>> (II) RADEON(0): XAA Render acceleration unsupported on Radeon >>>>>> 9500/9700 and newer. Please use EXA instead. >>>>> Everything looks like it's ok, except that you should be using EXA. >>>>> >>>>> Option "AccelMethod" "EXA" >>>> I'm not using Xorg.conf - I always start without it - all work OK. >>>> X-system by oneself configure all parameters. >>>> >>>>> What was the last working kernel? >>>> FreeBSD HP.lissyara.su 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Sat Mar 14 >>>> 19:08:30 MSK 2009 >>>> lissyara@HP.lissyara.su:/usr/obj/usr/src/sys/GENERIC amd64 >>>> >>>> >Actually, It looks like maybe it is waiting on hald? Did you just >>>> switch to usb2? >>>> Yes, I use GENERIC. But, old kernel with new USB stack and work correct. >>> Please make sure that hald is running and that lshal shows you mouse and >>> keyboard before we go digging any further. >> it show my mouse, my keyboard and my touchpad >> >>> The rs690 is picky about how the gart is allocated, but I had the flags >>> to bus_dmamem applied incorrectly. It should not have caused an issue >>> and all of the allocations look to be correct. >>> >>> You should probably not be running configless on this chip, as the >>> defaults are not optimum for it. >> I remove drm.ko and radeon.ko from /boot/kernel and copy it from >> /boot/kernel.old >> With new kernel and old modules - all work excellent. > > Ok, after a little discussion and looking at the bus_dma code... The > documentation is incorrect. I'll fix this up shortly... Big Thanks!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49C6A1DD.1030500>