Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Nov 2013 22:25:17 +0100
From:      "Herbert J. Skuhra" <hskuhra@eumx.net>
To:        freebsd-stable@freebsd.org
Cc:        andre@FreeBSD.org
Subject:   Re: 10.0-BETA3 NICs not working on Soekris Net6501-70 
Message-ID:  <86wqk6n2ki.wl%hskuhra@eumx.net>
In-Reply-To: <877gcaec18.wl%hskuhra@eumx.net>
References:  <877gcaec18.wl%hskuhra@eumx.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 15 Nov 2013 01:36:35 +0100
Herbert J. Skuhra wrote:

> Hi,
> =

> today, I've tried to upgrade my Soekris Net6501-70 from 9.2-STABLE to=

> 10.0-BETA3. But with the new kernel (GENERIC) I get the following err=
ors:
> =

> ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-=
223)
> [..]
> module_register_init: MOD_LOAD (vesa, 0xc0f156e0, 0) error 19
> ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-=
223)
> ACPI: Table initialisation failed: AE_NOT_FOUND
> ACPI: Try disabling either ACPI or apic support.
> [..]
>
> Running 'ifconfig -a' outputs:
> =

> : flags=3D8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST>
> ifconfig: ioctl(SIOCGIFINFO_IN6): Device not configured
> : flags=3D8008<LOOPBACK,MULTICAST>
> ifconfig: ioctl(SIOCGIFINFO_IN6): Device not configured
> =F0: flags=3D8010<POINTOPOINT,MULTICAST>
> ifconfig: ioctl(SIOCGIFINFO_IN6): Device not configured
> =F6: flags=3D0<>
> ifconfig: ioctl(SIOCGIFINFO_IN6): Device not configured
> =

> Starting in multi-user-mode I see:
> =

> eval: ${ifconfig_...}: Bad substitution
> eval: ${ifconfig_...}: Bad substitution
> eval: ${ifconfig_...}: Bad substitution
> eval: ${ifconfig_...}: Bad substitution
> eval: ${ifconfig_...}: Bad substitution
> eval: ${ifconfig_=F0...}: Bad substitution
> [...]
> Starting Network:      =F0.
> ifconfig: interface  does not exist
> ifconfig: interface  does not exist
> ifconfig: interface  does notem0: link state changed to UP
>  exist
> ifconfig: interface  does not exist
> ifconfig: interface  does not exist
> ifconfig: interface =F0 does not exist
> =

> Disabling acpi and apic doesn't resolve the problem.
> =

> The NICs are:
> =

> em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2000-0x201f =
mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on=
 pci5
> em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x3000-0x301f =
mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on=
 pci6
> em2: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x4000-0x401f =
mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on=
 pci10
> em3: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x5000-0x501f =
mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on=
 pci11

I think this problem is caused by this commit:

http://svnweb.freebsd.org/base?view=3Drevision&revision=3D254804

-- =

Herbert



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86wqk6n2ki.wl%hskuhra>