Date: Thu, 27 Mar 1997 15:21:33 -0600 From: Jeff Makinen <makinen@shoreland.com> To: freebsd-scsi@FreeBSD.ORG Subject: [Fwd: Problems with Jaz drive.] Message-ID: <333AE4DD.2F54C49A@shoreland.com>
next in thread | raw e-mail | index | archive | help
Message-ID: <333A9AF9.3F6AA884@shoreland.com>
Date: Thu, 27 Mar 1997 10:06:17 -0600
From: Jeff Makinen <makinen@shoreland.com>
Organization: Shoreland Inc.
X-Mailer: Mozilla 3.01Gold (X11; I; Linux 2.0.27 i586)
MIME-Version: 1.0
To: freebsd-questions@FreeBSD.ORG
Subject: Problems with Jaz drive.
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
While trying to copy tar files to a IOMEGA Jaz drive the following
messages occurred:
Mar 26 22:00:44 apollo /kernel: ahc0:A:1: unknown scsi bus phase.
Attempting to continue
Mar 26 22:00:44 apollo last message repeated 6 times
Mar 26 22:00:54 apollo /kernel: sd1(ahc0:1:0): imed out in message out
phase, SCSISIGI == 0xa6
Mar 26 22:00:54 apollo /kernel: sd1(ahc0:1:0): asserted ATN - device
reset in me ssage buffer
Mar 26 22:00:56 apollo /kernel: sd1(ahc0:1:0): timed out in message out
phase, SCSISIGI == 0xa6
Mar 26 22:00:56 apollo /kernel: ahc0: Issued Channel A Bus Reset #1. 3
SCBs aborted
Mar 26 22:00:56 apollo /kernel: ahc0:A:0: refuses syncronous
negotiation. Using asyncronous transfers
Mar 26 22:00:56 apollo /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,2
Mar 26 22:00:56 apollo /kernel: , retries:3
Mar 26 22:01:06 apollo /kernel: sd1(ahc0:1:0): timed out in message out
phase, SCSISIGI == 0xe6
Mar 26 22:01:06 apollo /kernel: sd0(ahc0:0:0): asserted ATN - device
reset in message buffer
Mar 26 22:01:06 apollo /kernel: ahc_intr: seqint, intstat == 0xd1,
scsisigi = 0xb6
Mar 26 22:01:06 apollo /kernel: sd1(ahc0:1:0): UNIT ATTENTION asc:29,0
Mar 26 22:01:06 apollo /kernel: sd1(ahc0:1:0): Power on, reset, or bus
device reset occurred
Now I get the following error messages:
apollo:/var/log$ ls /jaz
ls: /jaz: Input/output error
apollo:/var/log$ umount /jaz
umount: /dev/sd1c: Operation not permitted
I am running Free BSD 2.1.6 with an Adaptec controller. The same setup
worked fine 2 weeks ago. Any ideas ?
Jeff Makinen
makinen@execpc.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?333AE4DD.2F54C49A>